高纯氢气发生器   大流量氢气发生器
型号:G80132
氢气发生器是SPE技术电解纯水（杜绝加碱）制取高纯氢气的一类轻型、高效、节能、环保类高科技产品。
核心技术：该仪器的核心SPE电极是由复合催化剂与离子膜合为一体形成的高活性零极距催化电极，电解
效率高；其他主要部件均由优质高档工程塑料模具成型；有完善的电气控制系统。整机设计*，质量可靠，自动化程度高，产氢纯度高，输出流量大，型号、规格齐全，应用范围广。
工作原理 把满足要求的电解水（电阻率大于1MΩ/cm，电子或分析行业用的去离子水或二次蒸馏水皆可）送入电解槽阳极室，通电后水便立刻在阳极分解：2H2O=4H++ 2O-2，分解成的负氧离子（O-2），随即在阳极放出电子，形成氧气（O2），从阳极室排出，携带部份水进入水槽，水可循环使用，氧气从水槽上盖小孔放入大气。氢质子以水合离子（H+•XH2O）的形式，在电场力的作用下，通过SPE离子膜，到达阴极吸收电子形成氢气，从阴极室排出后，进入气水分离器，在此除去从电解槽携带出的大部分水份，含微量水份的氢气再经干燥器吸湿后，纯度便达到99.999%以上。
该产品对于大气量高纯氢的场合均可使用，可为多台气象色谱仪供气源，为吸氢合金充氢，及实验室加氢，还原焰，还原气体保护，太阳能，风能发电储能等使用。
主要技术参数
氢气纯度：99.999%
氢气流量：0～5050ml/min
输出压力：0.02～0.4Mpa（稳压输出）
水槽体积（L）：6.4
反应用水量（g/h）：96.43
水质要求：水的电阻率≥1MΩ/cm
电源电压：220V±15% 110V±15% 50/60Hz
输入功率：<2500W
外形尺寸：500×445×845mm
重量：约60kg
Pure hydrogen gas generator hydrogen generator of high purity hydrogen generator and large flux
Model: G80132
Hydrogen generator is electrolytic pure water (to eliminate alkaline) SPE technology for making high purity hydrogen of lightweight, high efficiency, energy saving, environmental protection type high-tech patent products.
Core technology: the equipment is the core of SPE electrode is formed by composite catalyst and ionic membrane is an organic whole to highly active zero polar distance of catalytic electrode, electrolyte
High efficiency; The other major components of all by the high quality engineering plastic molding; Have a complete electrical control system. The machine design is advanced, reliable quality, high automation, high purity hydrogen production, output flow, model, complete specifications, wide application range.
Works to meet the requirements of electrolysis of water (resistivity is greater than 1 m Ω/cm, electronic industry or analysis with deionized water or secondary distilled water are available) into electrolytic cell anode chamber, water immediay after the power supply at the anode decomposition: 2 h2o + + 2 = 4 h O - 2, into the negative oxygen ion (O - 2), then at the anode emit electrons, the formation of oxygen (O2), discharge from the anode chamber, carrying water into water tank, water can be recycled, oxygen from the water tank cover holes into the atmosphere. Hydrogen protons in the form of hydrate ions (H + • XH2O), under the action of electric field force, by SPE, ionic membrane to the cathode absorption electronic form hydrogen, after discharge from the cathode chamber, in the gas water separator, the removed from the cell to carry out most of the water, hydrogen containing trace water by the dryer again after moisture absorption, the purity was above 99.999%.
The product can be used for large volume high purity hydrogen occasions, but multiple weather chromatograph for gas source, for hydrogen alloy hydrogen absorption, and lab hydrogenation, reducing flame, reductive gas, solar energy, wind energy storage, etc.
The main technical parameters
Hydrogen purity: 99.999%
The hydrogen flow rate: 0 ~ 5050 ml/min
Output pressure: 0.02 ~ 0.4 Mpa (voltage output)
Tank volume (L) : 6.4
The reaction of water (g/h) : 96.43
Quality requirement: water resistivity of 1 m or more Ω/cm
The power supply voltage: 220 v + 15% to 110 v + 15% 50/60 hz
The input power: < 2500 w
Dimension: 500 * 445 * 845 mm
About 60 kg weight:
型号:G80132
氢气发生器是SPE技术电解纯水（杜绝加碱）制取高纯氢气的一类轻型、高效、节能、环保类高科技产品。
核心技术：该仪器的核心SPE电极是由复合催化剂与离子膜合为一体形成的高活性零极距催化电极，电解
效率高；其他主要部件均由优质高档工程塑料模具成型；有完善的电气控制系统。整机设计*，质量可靠，自动化程度高，产氢纯度高，输出流量大，型号、规格齐全，应用范围广。
工作原理 把满足要求的电解水（电阻率大于1MΩ/cm，电子或分析行业用的去离子水或二次蒸馏水皆可）送入电解槽阳极室，通电后水便立刻在阳极分解：2H2O=4H++ 2O-2，分解成的负氧离子（O-2），随即在阳极放出电子，形成氧气（O2），从阳极室排出，携带部份水进入水槽，水可循环使用，氧气从水槽上盖小孔放入大气。氢质子以水合离子（H+•XH2O）的形式，在电场力的作用下，通过SPE离子膜，到达阴极吸收电子形成氢气，从阴极室排出后，进入气水分离器，在此除去从电解槽携带出的大部分水份，含微量水份的氢气再经干燥器吸湿后，纯度便达到99.999%以上。
该产品对于大气量高纯氢的场合均可使用，可为多台气象色谱仪供气源，为吸氢合金充氢，及实验室加氢，还原焰，还原气体保护，太阳能，风能发电储能等使用。
主要技术参数
氢气纯度：99.999%
氢气流量：0～5050ml/min
输出压力：0.02～0.4Mpa（稳压输出）
水槽体积（L）：6.4
反应用水量（g/h）：96.43
水质要求：水的电阻率≥1MΩ/cm
电源电压：220V±15% 110V±15% 50/60Hz
输入功率：<2500W
外形尺寸：500×445×845mm
重量：约60kg
Pure hydrogen gas generator hydrogen generator of high purity hydrogen generator and large flux
Model: G80132
Hydrogen generator is electrolytic pure water (to eliminate alkaline) SPE technology for making high purity hydrogen of lightweight, high efficiency, energy saving, environmental protection type high-tech patent products.
Core technology: the equipment is the core of SPE electrode is formed by composite catalyst and ionic membrane is an organic whole to highly active zero polar distance of catalytic electrode, electrolyte
High efficiency; The other major components of all by the high quality engineering plastic molding; Have a complete electrical control system. The machine design is advanced, reliable quality, high automation, high purity hydrogen production, output flow, model, complete specifications, wide application range.
Works to meet the requirements of electrolysis of water (resistivity is greater than 1 m Ω/cm, electronic industry or analysis with deionized water or secondary distilled water are available) into electrolytic cell anode chamber, water immediay after the power supply at the anode decomposition: 2 h2o + + 2 = 4 h O - 2, into the negative oxygen ion (O - 2), then at the anode emit electrons, the formation of oxygen (O2), discharge from the anode chamber, carrying water into water tank, water can be recycled, oxygen from the water tank cover holes into the atmosphere. Hydrogen protons in the form of hydrate ions (H + • XH2O), under the action of electric field force, by SPE, ionic membrane to the cathode absorption electronic form hydrogen, after discharge from the cathode chamber, in the gas water separator, the removed from the cell to carry out most of the water, hydrogen containing trace water by the dryer again after moisture absorption, the purity was above 99.999%.
The product can be used for large volume high purity hydrogen occasions, but multiple weather chromatograph for gas source, for hydrogen alloy hydrogen absorption, and lab hydrogenation, reducing flame, reductive gas, solar energy, wind energy storage, etc.
The main technical parameters
Hydrogen purity: 99.999%
The hydrogen flow rate: 0 ~ 5050 ml/min
Output pressure: 0.02 ~ 0.4 Mpa (voltage output)
Tank volume (L) : 6.4
The reaction of water (g/h) : 96.43
Quality requirement: water resistivity of 1 m or more Ω/cm
The power supply voltage: 220 v + 15% to 110 v + 15% 50/60 hz
The input power: < 2500 w
Dimension: 500 * 445 * 845 mm
About 60 kg weight: