$item.Name

首页>实验室常用设备>离心机>大容量离心机

SG-853 automatic balancing large-capacity centrifuge

型号
SG-853
上海硕光电子科技有限公司

高级会员15年 

生产厂家

该企业相似产品

large-capacity centrifuge

在线询价

desktop large-capacity centrifuge

在线询价

大容量离心机

在线询价

大容量离心机

在线询价

台式大容量离心机

在线询价
针头式过滤器,表面测试培养皿,电动搅拌器,磁力搅拌器,不锈钢电热板,搅拌器,水浴锅,电热板,振荡器,培养箱。

上海硕光电子科技有限公司紧紧依托各大院校和科研院所,紧密关注科学技术发展和实验技术发展进程。以苛刻的态度对待品质控制、以优良的信誉服务于用户、以完善的售后服务立足于市场。以开拓创新、务实进取的企业宗旨,本着客户就是上帝的经营理念,以优良的品质和服务来保证阁下员工的良好使用体验、职业健康,安全环境和美好心情。

上海硕光电子科技有限公司也专业代理欧、美、日先进进口科学仪器,国产仪器,实验室家具及相关消耗品,专业涉及化工轻工、电子、医学制药、食品、纺织、涂料、日用化学、化妆品及生命科学,以满足用户多方面多层次的需求。

上海硕光电子科技有限公司代理的产品多为世界。主要产品为通用实验设备、 化工轻工仪器 、电子、农业食品相关仪器、生命科学仪器、理化分析仪器、微生物仪器、消耗品及试剂。
  事成于信,业精于勤,上海硕光电子科技有限公司经过多年的耕耘发展,特别感谢同业友商及用户的支持,不敢懈怠,必将更加努力,精心维护来自各方的信任和支持。

我们愿与各界竭诚合作,携手发展,共同进步。热忱欢迎新老客户洽谈指导。热烈欢迎各地友商代理销售我司产品,我们将提供多方位的方案予大力支持。

详细信息

SG-853 automatic balancing large-capacity centrifuge is  the company  according to the user experience,Carefully design and development of a new generation of centrifuges products, and compared to similar products with higher quality advantage:apply to the hospital laboratory, biochemistry laboratory for qualitative analysis, for plasma, serum, urea, and vaccine manufacturing use. is applicable to all types of laboratory samples of high-capacity centrifugal precision laboratory instruments.
Product features:
1, outstanding performance: micro-computer control, frequency control DC, brushless DC motor without carbon powder pollution;
2, simple: touch panel, digital display, intuitive and reliable;
3, high-capacity multi-rotor, the user easily select

Technical data:
Maximum speed: 5000r/min
No. 1 rotor: 2 *400ml
No. 2 rotor: 4 * 250ml
No. 3 rotor: 36 * 10ml
No. 4 rotor: 72 * 5ml
Motor: Brushless DC Motor
Timing range: 0-99min


Handling Precautions
Work in a high speed centrifuge, used to safety and to ensure that the equipment to maintain high precision work, we must do the following:
1.Centrifuges used to be placed in a smooth, strong on the counter; large-capacity high-speed low-speed centrifuge and refrigerated centrifuge to be placed accordingly on the ground in a solid, level place. Centrifuge work done, the load balancing, weight error as small as possible, otherwise it will cause severe vibration, and shaft damage turned centrifuge.
2.Centrifuge starts, switch knob should be on the low speed position, start and then gradually adjust to the desired value. A work, shall knob again transferred to low-bit work, at high speed block ban on direct start.
3.Rotor in the strict inspection before each use if a foreign body and the dirt hole, in order to maintain balance. Turned around and must be kept dry and clean, do not impact abrasion. Such as accidentally dropped, turned to X-ray film should check that no internal injury can continue to use. Turned after each use with warm water (50 Degrees -60 Degrees) and neutral detergent immersion cleaning, and finally with distilled or deionized water rinse, soft cloth after drying with hair dryer, wax, dry place.
4.Pull all kinds of tube length, strength and stretch are different, should the need to use, the tube can be made of many different materials, such as polyethylene, cellulose, polycarbonates, polypropylene. Use care to ensure the sample, non-corrosive materials, solvent and gradient centrifuge tube and cap components. Expired, the aging, there are cracks or corrosion of the tube by minimizing or spin-down use. Control the use of plastic tube number, pay attention to standard matching. Centrifugal process may open the centrifuge lid, not by hand or foreign body collisions are turned and the rotation of the centrifuge tube.
5. To ensure safety, be sure to use ground wire
6.In the centrifuge process, such as abnormal phenomena, such as the noise and vibration is not normal, should immediay stop checks, not to find reasons not to continue to operate .
7.Daily use of centrifuges in the process, every three months the level of response to host a degree of correction for each transfer using 500 million deal with a vacuum pump oil, working 500h should check drive motor carbon brush, preferably with a vacuum cleaner to friction toner remove, if necessary, to replace carbon brushes or commutator with fine sandpaper polish.Should be cleaned about every driver using the 1500h site with high-speed bearings and grease shaft and turned rust-proof joint of fat should be kept painted, do not be long-term anti-rust oil coating oil paper wrap. When not in use should be switched each month low 1 or 2 times, each time 0.5h, to ensure the normal operation of the site.
8. Be sure to place the centrifuge tube placed symmetrically, and to keep the weight fairly. Things in the open centrifuge to centrifuge lid.
9. Centrifugal liquid should not be too low boiling point,Should pay attention to internal

相关技术文章

同类产品推荐

相关分类导航

产品参数

企业未开通此功能
详询客服 : 0571-87858618
提示

请选择您要拨打的电话:

当前客户在线交流已关闭
请电话联系他 :