- 面议
起订量：
船舶工业氧气分析仪
- 型号
该企业相似产品
苏州圣光仪器主要生产经营工业工程及事业单位专用的检测仪器设备,生产经营产品包括:铁素体含量检测仪(铁素体仪/铁素体测试仪/铁素体测量仪/铁素体测定仪)、国产铁素体检测仪、超声波脉冲发射接收器、涂层表面针孔检测紫外线灯、苏州荧光光谱仪、高精度手持式转速表、多功能超声波测厚仪、微尘埃粒子计数器、大流量空气粒子计数器、铁素体测量仪、铁素体检测仪、铁素体测试仪、铁素体测定仪、铁素体含量测量仪、铁素体含量检测仪、铁素体含量测试仪器、铁素体仪、铁素体分析仪、铁素体观测仪、探伤紫外线灯、兰宝高强度紫外灯、探伤黑光灯、高温耦合剂、超声波探伤仪、超声波测厚仪、磁粉探伤仪、涂层测厚仪、X-RAY镀层测厚仪、电火花检测仪、粗糙度仪、紫外线灯、硬度计、测振仪、频闪仪、张力计、瓶盖扭力计、磨耗试验机、色差仪、附着力测试仪、光泽度仪、钢筋扫描仪、混凝土保护层测厚仪、钢筋锈蚀仪、回弹仪、混凝土专用测温仪、内窥镜、推拉力计、烟气分析仪、气体检测仪等等.以及一些检测仪器常用耗材如:耦合剂(高温耦合剂)、高温探头、测厚仪/探伤仪/测温仪探头等等选配件.
我公司生产的铁素体含量测量仪(又名铁素体测量仪、铁素体检测仪、铁素体测试仪、铁素体测定仪等)sp10a(由老款SP10升级换代)在功能和稳定性方面与国外同类产品基本处于同等水平,但在价格上处于优势,性价比.欢迎新老客户来我公司考察洽谈或来电咨询交流,寻求检测技术突破.
详细信息
船舶工业氧气分析仪特征：
Small, Lightweight and Inexpensive
The Argweld PurgEye® 300 Nano Weld Purge Monitor® is small, lightweight and inexpensive.
The PurgEye® 300 Nano is equipped with an integrally mounted sensor to eliminate electrical interference.
The PurgEye® 300 Nano is specifically developed for weld purging of critical stainless steel and titanium joints and others where data logging, alarms and welder control are not necessarily required.
The PurgEye® 300 Nano is perfect for operation with manual welding, orbital welders, welding enclosures, pipe welding, chamber welding, duplex steel and titanium welding and ideal for welding stainless steel in ultra clean applications.
The PurgEye® 300 Nano has secure 'leak tight' connectors for weld purge hoses. Also, the instrument can be used with optional accessory hand pump and gas sampling probe.
The PurgEye® 300 Nano has low repair, refurbishment and re-calibration costs. There is no pump needed and hence there are no moving parts to fail.
船舶工业氧气分析仪总体描述：
Purpose-designed Purge Monitor
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor® has been specifically designed as a very low cost, basic entry level version of the Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld purging down to 10 ppm.
With a large alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very accuray from 1000 ppm down to 10 ppm.
The Argweld® PurgEye® 300 'Nano' uses a unique new low cost long life sensor which has very little maintenance requirement and avoids the disadvantages of monitors with 'wet cell' technology that have to be constantly calibrated and have sensors replaced.
Argweld® PurgEye® 300 'Nano' Weld Purge Monitors® are available for immediate delivery.
技术参数：
Argweld® PurgEye® 300 Nano Weld Purge Monitor® Accuracy Range
Measuring Range: | 1,000 ppm down to 10 ppm |
Accuracy: | ±2.0% of scale reading |
Size: | 145 x 190 x 70 mm |
Power Consumption: | 18 W |
Operating Voltage: | AC 115/230 V single phase 50/60 Hz |
Weight: | 1.5 kg |
The PurgEye® 300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz. The unit uses an external 12 V Power Supply Unit with an input voltage range of AC 90 to 260 V (included).
The PurgEye® 300 Nano has a large alpha-numeric display.
Display readings can only be shown in ppm.
The PurgEye® 300 Nano has a warm up time of less than 60 seconds.
Supplied with:
External 12 V Power Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and Management Systems
便携式测氧仪//氧气含量检测仪PurgEye 300 Nano/APIO 300N使用说明：
接通电源插头即为开机。
待显示器中显示为1000并闪烁时（大约10分钟左右），表示机器已经热机完成，可以使用。
分别把探针头及排气管插入机器的2个孔中。（上下孔没有规定顺序）。
把探针头插入带检测管道的焊缝中即可检测。
电源插头拔掉即为关机。
便携式测氧仪//氧气含量检测仪PurgEye 300 Nano/APIO 300N其他规格：
Shipping Information, Weights and Dimensions
Product Codes and Sizes
Dimensions 145 x 190 x 70 mm
Gross weight 2.0 kg
Nett weight 1.5 kg
Volumetric weight 2.1 kg
Actual Instrument dimensions 145 x 190 x 70 mm
Actual Instrument weight 1.5 kg
Storage carry case dimensions 377 x 322 x 95 mm
更多PurgEye 300 Nano/APIO 300N讯息请。
