- 面议
起订量：
100D P900/100D P1200 美国Glas-Col铝制加热套保护罩/防护罩
- 型号
- 100D P900/100D P1200
- 参数
- 产地类别:进口
该企业相似产品
上海涸宇机电科技有限公司主要为高校、科研院所及各类实验室提供专业的实验仪器、耗材等相关产品。
基于目前市场上销售的各类控温仪用户所反映的情况如：温度过冲、控温不精确、控温不准等几类常见问题困扰，上海涸宇机电科技有限公司经多年的销售经验特研发出LDHY温度控制器系列产品，帮助顾客解决问题，也可根据您的具体要求为您量身定制。资深的研发生产、完善快速的售后反映、承诺品质，顾客至上，打造*服务质量，公司秉承：“客户的需求就是我们的追求”为理念*满足广大客户需求。
我们以客户至上的原则为客户提供售前咨询选型、售后快速响应为客户提供优质的服务。公司经营销售产品有进口温度控制与检测仪器设备、环境水质分析仪器仪表、多种搅拌混合仪器、玻璃器皿系列与其他耗材等。
详细信息
美国Glas-Col铝制加热套保护罩/防护罩PONCHO SAFETY SHIELDS
雨披安全盾牌
Poncho安全罩在系列TM或STM地幔中覆盖了一个烧瓶，大大提高了操作安全性。只有在使用了Poncho安全盾牌，并且在12升和更大的尺寸下，可以用惰性气体(如氩气)净化斗篷和斗篷，才能在系列STM mantles中处理易燃液体。除了减少火灾危险，雨披护盾还可以保护烧瓶免受诸如螺丝刀或钳子之类的坠落物体的伤害，保护人员免受飞行玻璃的伤害
液体如果烧瓶在高真空蒸馏或爆炸中内爆，并作为一种有效的绝缘体。Poncho有两个玻璃观测端口，允许在仍提供保护的情况下加热材料。盾牌上有一个密封圈和一个不扩散条约清洗的港口(1 / 8大小的P1300和更小的和3 / 4”的P1400和更大的)。下图所示的Ponchos是单颈烧瓶，已经准备好使用。多颈烧瓶的Ponchos可能需要在实验室进行zui后的试穿。
美国Glas-Col铝制加热套保护罩/防护罩PONCHO SAFETY SHIELDS
PONCHO SAFETY SHIELDS
The Poncho Safety Shield covers a flask in a Series TM or STM mantle, greatly improving operating safety. Flammable liquids should be processed in Series STM mantles only if a Poncho Safety Shield is used and, in sizes 12-liter and larger, the mantle and Poncho can be purged with an inert gas such as argon. In addition to reducing fire hazards, the Poncho Shield also protects flasks from falling objects such as screwdrivers or pliers, protects personnel from flying glass and
liquid if flask implodes under high vacuum distillation or explodes, and serves as an efficient insulator. The Poncho has two glass observation ports, allowing the material being heated to be seen while still affording protection. The shield is furnished with a sealer ring and an NPT purge relief port (1/8 for sizes P1300 and smaller and 3/4” for P1400 and larger).Ponchos shown in chart are for single-neck flasks and are shipped ready for use.Ponchos for multiple-neck flasks may require final fitting in lab.
Note
When using flasks with additional or modified necks, neck location and tubulation length are important. To reduce fitting problems, side necks should not be lower than halfway between equator and top center neck. Side necks should be nearly vertical, if possible, and necks must project through Poncho far enough to allow makeup of taper or ball joints (see chart). For larger sizes, please consult the factory.
How to order
Specify catalog number in chart for single-neck flasks. Submit a sketch for custom-made flasks or those difficult to describe.
PONCHO SAFETY SHIELDS
PONCHO SAFETY SHIELDS
