SHYODU Model 100 Gel Timer凝胶时间测定仪详细介绍:
SHYODU Model 100 Gel Timer凝胶时间测定仪可以轻松确定树脂塑料、粘合剂、干燥油、双组分弹性体、油漆和其他硬化液体在环境温度下的凝胶时间-这是一个简单的测试设备。一个低转矩的同步电机旋转测试样品中的一个特殊形状的搅拌器。当凝胶化发生时,阻力超过扭矩,从而停止齿轮电机和经过的计时器,并激活闪烁的LED。凝胶时间将以小时、分钟和秒显示在数字显示屏上。即使电源开关关闭,测试时间也将一直显示到重置。
将准备好的材料样品倒入一次性纸杯中。通过旋转O形圈支架中的纸杯,将纸杯放入装置底座,直到就位,将一次性金属丝搅拌器底部插入纸杯,并将顶部连接到驱动主轴,将计时器设置为“零”,然后打开装置。当凝胶化发生时,读取时间并丢弃杯子和搅拌器,凝胶定时器齿轮电机可以保持短时间停滞而不会造成伤害。
没有混乱!不需要工具!不清理!
这种耐用的凝胶时间测定仪使用廉价的金属丝搅拌器和纸杯。无需特殊技能,在美国设计和建造,可提供长期有用的实验室或车间服务。
SHYODU Model 100 Gel Timer凝胶时间测定仪技术参数:
最长记录时间:9999小时59分59秒
最短记录时间:1秒
搅拌速度:20rpm
准确度:±2%
电源要求:110v/60Hz或220V/50Hz
电气连接:3线接地线组
尺寸:12英寸长x 10英寸高x 8英寸宽
运输重量:6磅
DESCRIPTION
The Shyodu Gel Timer easily determines the gel time of resinous plastics, adhesives, drying oils, two-component elastomer, paints and other hardening liquids at ambient temperatures- A simple device for a simple test. A low-torque, synchronous motor rotates a specially shaped stirrer in the test sample. As gelation occurs, drag exceeds torque, which stops the gearmotor and elapsed timer and activates a flashing LED. Gel Time will be shown in hours, minutes and seconds on the digital display. The test time will remain displayed until reset, even when the power switch is turned off.
SIMPLE TO OPERATE
Pour the prepared material sample into the throwaway paper cup. Place the paper cup into the base of the unit by rotating the cup in the O-ring holder until seated completely, insert the throwaway wire stirrer bottom into the cup and attach the top to the drive spindle, set the elapsed timer to "zero" and switch on the unit. When gelation occurs, read the time and discard the cup and stirrer, The Gel Timer gear motor can remain stalled for short periods without harm.
NO MESS! NO TOOLS REQUIRED! NO CLEANUP!
This durable gel timer uses inexpensive wire stirrers and paper cups. No special skills are required, Designed and constructed in the USA to offer long and useful laboratory or shop service.
SPECIFICATIONS:
Maximum recording time: 9999 hours, 59 minutes, and 59 seconds
Minimum recording time: 1 second
Stir speed: 20rpm
Accuracy: ±2%
Electrical requirements: 110v/60Hz or 220V/50Hz
Electrical connection: 3-wire grounded cord set
Dimensions: 12" L x 10" H x 8" W
Shipping Weight: 6 pounds