- ¥1250001件起订
起订量：
SCALP-05便携式玻璃应力仪英文版技术参数
该企业相似产品
详细信息
SCALP-05便携式智能玻璃应力分析仪可以测量半钢化和钢化平板玻璃、光伏玻 璃、汽车玻璃厚度方向上的内部残余应力、结构 应力和安装后的机械载荷应力分布，以及压应力 和张应力厚度方向定量数值分布。
技术指标：
| 型号 | SCALP-05 |
| 测量厚度范围 | 1~5mm |
| 测量表面压力范围 | >1.0Mpa |
| 测量精度 | <1MPa （表面应力<4MPa） |
| <5%（其他情况） | |
| 可测量玻璃 | 平面和曲面玻璃（r>300mm） |
| 可测量表面 | 空气面、锡面、压花 |
| 激光波长 | 635nm |
| 激光输出功率 | 5mW |
| PC配置要求 | Windows Vistađ7đ8及以上NET Framework 4.5 |
| PC接口 | USB2.0 |
| 操作温度 | 10~50℃ |
| 操作湿度 | 0~90%相对湿度（无冷凝） |
| 限制条件 | 不能直接测量Low-E膜面a减反射膜面、丝网印面测量时阳光避免直射 |
| 外形尺寸 | 56mmx27.5mmx76mm |
| 重量 | <250g |
SCALP-05 is a compact scattered light polariscope for depthwise stress measurement in sheet glass. SCALP-05 contains diode laser, optics and camera. Recording of the data and stress calculation is done by PC, connected over USB. Handling of the polariscope is simple – clean the glass, apply a drop of immersion liquid, place SCALP onto the same spot and click the start button in software. After 3 seconds the stress profile is shown on the screen of PC.
Dimensions (L*W*H): 56*28*76 mm
Weight: 177 g
Communication interface: USB 2.0
Power supply: USB bus
Power consumption: 1.0 W
Laser wavelength: 635 nm
Laser output power:<5 mW
Sensor resolution: 1280*1024 pixels
Software requirements: Windows 10, .NT 4.6
Measurable glass: Flat and curved glass (r > 300 mm)
Measurable surface: Air and tin side
Minimum measurable thickness:<1 mm
Maximum measurable depth: 6 mm (on glass with any thickness)
Measurement time: 1-6 seconds, default 3 seconds
Minimum surface stress: 1 MPa
Maximum stress: Not limited
Precision:<1 MPa if surface stress < 4 MPa, <5% otherwise
Operating conditions: +10 … +50 °C (with some thermal isolation down to -10 °C)
Humidity: 0 – 90 % R.H. (non-condensing)
Ambient light: Direct sunlight must be avoided
Calibration: Calibrated by manufacturer
Warranty: 2 years
Limitations: some coatings (low-E, reflective, etc.), covered or painted surfaces, surfaces with texture
