The Numatics Air Bellows is the ideal pneumatic solution to short-stroke - High load cylinder / actuator applications.在纽曼帝克空气波纹管是一种理想的解决方案，气动短行程-高负荷缸/执行器的应用程序。 They are also able to provide a safe, quiet and consistent suspension system for vibrating and noisy machinery.他们还能够提供一个振动和噪音机器的安全，安静和*的悬挂系统。

Standard Specifications 标准规格

• Diameters, 80 to 800mm直径80至800mm
• Stroke lengths up to 16 3/4"行程长度可达16 3 / 4“
• Load capacity up to 15,000lbs.负载能力高达15,000磅。
• Medium; Compressed air - filtered & non - lubricated中等;压缩空气-过滤及非-润滑
• NPT or G ports不扩散核武器条约或G端口
• Operating Temperature, -40º C to + 70º C （-40º F to + 140º F）工作温度，-40℃至+ 70℃（-40 ° F至+ 140℉）

Features 特征

• Single-acting low cost actuator, no maintenance or lubrication, no pistons or moving parts.单动器成本低，无维修或润滑，没有活塞或移动部件。
• Diameters, 80 to 800mm直径80至800mm
• Stroke lengths up to 16 3/4"行程长度可达16 3 / 4“
• Load capacity up to 15,000lbs负载容量高达一五○○○磅
• Medium; Compressed air - filtered & non - lubricated中等;压缩空气-过滤及非-润滑
• NPT or G ports不扩散核武器条约或G端口
• Operating Temperature, -40º C to + 70º C （-40º F to + 140º F）工作温度，-40℃至+ 70℃（-40 ° F至+ 140℉）

Applications 应用

	Lifting Table:升降台： Lifting force is multiplied in an uncomplicated fashion by parallel connection of several Numatics bellows.提升力乘以一个简单的方式，在由几个纽曼帝克波纹管并联。
	Roller Tensioner:辊张力： Uniform pressure applied against rollers.统一申请，对辊压力。 Irregularities in the material to be treated are offset thanks to the characteristics of the Numatics bellows.在材料处理不当行为而被抵销由于波纹管的纽曼帝克的特点。
	Press:新闻： Easy to adjust pressure force via a wide lift range.通过易于调整范围广泛的电梯压力的力量。
	Conveyor Stop:输送机停止： Low minimum heightzui低高度低 Fast lift movement.快速电梯运动。
	Conveyor Tensioning Device:输送带拉紧器： Adjustable tensioning force or varying conveyor belt load可调式张紧武力或不同输送带负荷 No deflection if the tensioning force is increased.如果没有力量增加拉伸变形。
	Tilting:倾斜： Can be used even in dusty or dirty environments.甚至可以用在有灰尘或肮脏的环境。
	Scissors-Type Lifting Table:剪刀式升降台： Tip angles of up to 30° possible.高达30 °可能提示角度。
	Clamping Devices:夹紧装置： Environmentally hazardous media do not escape in the event that bellows are damaged.对环境有害的媒介无法逃生如果波纹管已损坏

Features: 特点：

• Body: High strength harcoat aluminum.身体：高强度harcoat铝。
• Rods: Ground aluminum, hardcoat anodized, Teflon impregnated non-rotating.棒：地面铝，硬膜阳极氧化处理，铁氟龙浸渍非旋转。
• Retract Stop Adjustment: Two adjustment screws allow flexibility to adjust the retract stroke on both rods independently.收回停止调整：调整螺丝，让两个灵活地调整杆两杆的收回独立。
• Bronze Bushings: High side load capabilities, self lubricating, long life.青铜衬套：高侧的负载能力，自润滑，寿命长。
• Sensing: Hall effect sensors available to sense extend & retract positions.感应：霍尔效应传感器可用于扩大和收缩感的立场。

Features: 特点：

• Body: Hardcoat anodized aluminum, light weight, durable Teflon impregnated, lubricated, maximizes seal life.身体：硬膜阳极化铝，重量轻，耐用的聚四氟乙烯浸渍，润滑，密封寿命zui大化。
• Rod Bushing: Large bearing area provides maximum rod support side load protected.连杆衬套：大型轴承领域提供了zui大的棒支持并行负载保护。
• Piston Rod: Hardened electroless nickel plated corrosion resistant, durable low wearing surface.活塞杆：镀镍硬化耐腐蚀，经久耐用低磨损表面。
• Clamp Arm: Taper mounted convenient arm adjustment, 360 degree adjustment.夹臂：锥形调整臂安装方便，360度的调整。
• Mounting Surface: Convenient location precision machined to accept standard industrial fasteners.表面安装：方便定位精度加工接受标准工业紧固件。 （Single Arm Only）. （单臂只）。