上海爱泽工业设备有限公司

化工仪器网中级8

收藏

MR CHEMIE清洁剂MR85产品描述

时间:2018-04-20      阅读:3690

德国MR CHEMIE清洁剂MR85产品描述
外观及组成:
基于醇的溶剂混合物,符合EN ISO 3452-1.
慢干
闪点材料+13°C
适用于所有金属(用于塑料时需要在使用前进行测试)
处理温度-10至+50°C
General appearance and composition:
Mixture of solvents based on alcohol, method C according to EN ISO 3452-1
Dries slowly
Flash point material +13 °C
Suitable for all metals (suitability for plastics needs testing prior to use)
Processing temperature -10 to +50 °C
Aerosol can overhead sprayable

MR CHEMIE清洁剂MR85应用:
首先以合适的方式去除物体表面的火绒,锈和其他污染物。
您可以使用MR85 Remover作为去除油脂的预滤器。通过喷涂,刷涂,浸水或浸渍将MR渗透剂涂抹在任一部位上。留待渗透至少5分钟。然后使用干净的无绒布轻轻地蘸上MR85清洁剂,从表面去除多余的MR渗透剂。在距离物体干燥表面20厘米左右处,均匀轻薄喷涂MR developer(例如MR70),形成均匀喷层。根据选用的渗透剂,物体表面缺陷将显示为红色或荧光指示。请注意:如果涂层太薄,则不会显示。
Application:
Remove tinder, rust and other contaminations from surface in a suitable manner.
You can use MR85 Remover as precleaner for removal of oils or fats. Apply MR Penetrant to the part to be tested either by spraying, brushing, flooding or dipping. Allow to penetrate for at least 5 minutes. Remove excess MR Penetrant from surface using a clean lint-free cloth lightly moistened with MR85 Remover. Spray MR Developer (e.g. MR70) from a distance of approx. 20 cm on the dry surface, achieving a thin, uniform layer. Depending on the used penetrant, surface defects will appear as red or fluorescent indications. Please note: If the developer layer is too thick tiny discontinuities will not appear through the developer.

Relevant approvals and specifications
Sample testing acc. to EN ISO 3452-2 and ISO 3452-6
Low content of halogens and sulphur according to EN ISO 3452-2 and ASME Code V, Section V, Article 6
In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted
by Framatome ANP
Produits et Matériaux Utilisables en Centrales (PMUC)

zui短保质期:
室温下至少4年
包装规格:
气雾式,500毫升(1箱包含12个气溶胶)
5升,30升,200升
阀笔(笛笔)
Minimum shelf life:
Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
Aerosols, 500 ml (1 box contains 12 aerosols)
5 L, 30 L, 200 L
Valve pen (Piccolo-Pen)

爱泽工业(IZE_INDUSTRIESMR CHEMIE)*经销、常用备件型号:
MR CHEMIE清洁剂MR79
MR CHEMIE清洁剂MR85
MR CHEMIE清洁剂MR88
MR CHEMIE清洁剂MR91 

上一篇: HYDAC齿轮泵PGE103系列技术数据及型号解析 下一篇: MR CHEMIE显像剂MR70产品描述
提示

请选择您要拨打的电话: