老师简介

王环江  副教授

研究方向:

1、煤经合成气转化的一碳化学与工程;

2、煤转化利用中的环境化学与工程;

2014年7月毕业于中国科学院兰州化学物理研究所，物理化学专业，获理博十学位主持省级基金项目1项，教育厅项目1项，发表学术论文10余篇。

论文简介

王环江副教授的论文《Alloying lron into Palladium Nanoparticles for anEfficient Catalyst in Acetylene Dicarbonylation》在《Nanomaterials》上发表王环江副教授在实验中所用YZPR-50由岩征仪器提供，论文中也特别提到上海岩征实验仪器有限公司，在此非常感谢教授对岩征仪器的选择和认可。岩征仪器将助力科研工作者加速取得更加辉煌的成就!

论文中局部图表引用：

实验中所使用的岩征产品

2.5. Catalyst Eualuation

Typically, the methanol (20.0 mL) and catalyst (10 mg) were placed into the 50 mL autoclave (Yanzheng Instrument Ltd., Shanghai, China). After sealing the reactor, it was loaded with 11 mmol of acetylene, a certain amount of CO, and dry air (total pressure of 4.0 Mpa) in sequence. Then, the mixture was stirred (500 rpm) for 15 min, followed by heating to the target temperature and was then kept for several hours. When the reaction was complete, the autoclave was depressurized once it had cooled to room temperature. Before workup, the solid catalyst was separated by centrifugation, and 30 mg of internal standard methyl benzoate was added into the liquid products. Finally, a gas chromatograph (Agilent GC 6890N, Agilent Technologies Co., Ltd., Santa Clara, CA, USA) equipped with a flame ionization detector (FID) and a J&W 1701 (30.0 m × 250 µm × 0.25 µm) capillary column was used to quantitatively analyze the mixture solutions.