其他品牌 品牌
代理商厂商性质
上海市所在地
Fisher Isotemp加热盘/磁力搅拌器
¥13LabServ Nitrile检测手套
¥15KimCote 塑料镀膜蓝盖瓶
¥13Kimax玻璃器皿套装
¥17Fisherbrand一次性硼硅酸玻璃试管
¥19Fisherbrand称量漏斗
¥15Kimax RAY-SORB 可重复使用带盖玻璃瓶
¥11Omniprobe Lift-Out Grids 载网
¥133M导电胶带Copper Conductive Tapes
¥16Microarray Slides微阵列载玻片
¥17INDICATING DRIERITE 无水硫酸钙干燥剂
¥17DRIERITE 干燥剂
¥10Microarray Hybridization Systems微阵列杂交系统
LifterSlip™ Premium Printed Coverglass
A. LifterSlip™ Premium Printed Coverglass
LifterSlip™ offers a simple solution to the problem of hybridization non-uniformity. An innovative raised edge design provides separation and allows for even dispersal of hybridization solution between the DNA chip and coverslip. LifterSlips™ allow for increased data quality by eliminating gradients caused by floating standard coverslips on hybridization solutions. The printed bars allow for easy injection of hybridization solution under the pre-positioned coverslips. Capillary attraction ensures that LifterSlip™ stays in place.
Depending on size and design configuration LifterSlip™ can hold a range of volumes.
LifterSlip™ is #2 thickness (0.20-0.22 mm) and the bar height is 0.04-0.06 mm.
LifterSlip™高级印花盖玻片
A. LifterSlip™高级印刷盖玻片
LifterSlip™为杂交不均匀性问题提供了简单的解决方案。 创新的凸起边缘设计提供分离,并允许DNA芯片和盖玻片之间均匀分散杂交溶液。 LifterSlips™通过消除杂交解决方案中浮动标准盖玻片引起的梯度,可提高数据质量。 印刷的条允许在预先定位的盖玻片下容易地注射杂交溶液。 毛细管吸引力确保LifterSlip™保持在原位。
根据尺寸和设计配置,LifterSlip™可以容纳一系列体积。
LifterSlip™厚度为#2(0.20-0.22 mm),棒高为0.04-0.06 mm。
Cat. # | Bar Width (mm) | Approx. Volume | Size (mm) | Approx. Pieces per oz. |
72186-60 | .75 | 35.89µL | 25 x 60 | 35 |