脉冲输出型                                   

                                      ★ 工作压力：+12VDC或者+24VDC两种（客户                                               定货前必须选定一种供电电源）。

                                      ★ 信号传输距离：小于300米。

                                      ★ 输出信号：方波信号

                                      ★ 幅值：+12VDC供电幅值大约为10V；+24VDC                                               供电幅值大约为20V。

                                      ★ 安装：放大器和涡轮流量传感器连接为M16×1螺                                          紋，涡轮流量传感器安装完后，把放大器拧到涡                                          轮流量传感器上，用手拧到感觉放大器到底后再                                          把锁紧螺母带紧。

                                      ★ 接线：脉冲输出型放大器对外引线为三根，                                               红线、黄线、 蓝线。红线接正电源，黄线为脉                                         冲输出，蓝色为地线。