Hipot Test
100 - 5 000 V AC,
0.1 - 100 mA, 500 VA
Isc > 200 mA, potential-free 
Protective Earth Test
0.5 - 25 A AC, 1 - 500 mΩ 
Insulation resistance
50 - 1 000 V DC,
0.5 - 400 MΩ,
current-limited, EN 50191 
Test system with HV-AC, ISO, PE 
Test system with X4 user interface for remote control via PC and for standalone usage:
- Test time adjustable from 0,1 s - 99 min, endless
- Including manufacturers certificate of calibration
Hi Pot test, HV-Module HVA5-100:
- Test voltage adjustable from 100 - 5000 V AC, potential free
- Trip current adjustable from 0,1 - 100 mA
- Frequency adjustable from  45 - 65 Hz
- Electronically regulated, incl. ramp function and active discharge
- Power of transformer 500 VA, short circuit current > 200 mA
- Switching on test voltage at zero crossing of voltage
- Monitoring of the test leads for cable breakage
- Monitoring of contact to the test object
Insulating resistance test, ISO-Module DC10-CL:
- Test voltage adjustable from 50 - 1000 V DC
- Resistance limits adjustable from 0 - 400 MOhm
- Electronically regulated, incl. ramp function and active discharge
- Current limited as detailed in EN 50 191
- Monitoring of the test leads for cable breakage
- Monitoring of contact to the test object
Protective Earth test, PE-Module AC25:
- Test current adjustable from 2 - 25 A AC
- Resistance limits adjustable from 1 - 500 mOhm
- Switchable to test as detailed in  EN 60 204
- Test voltage adjustable < 6 V und < 12 V
- Electronically regulated
Additional output:  PEP4-socket
- PE-connection for mains terminal of the test object
 This enables compley independent PE-testing,
 separated from HV- ISO-testing.

• - Fully electronic test system for production and laboratory
• - Menu-controlled test procedures: manual or fully automatic
• - 5 different versions available from the remote version to stand-alone with 5.7“ or 10.4“ screen with TFT and touch, with WIN CE ® or WINDOWS ®
• - LAN, USB, RS232, CAN, VGA, DIGITAL-IN/OUT, Analogue-IN/OUT,Frequency-IO (depending on the user interface)
• - Freely programmable test procedure, parameters, limit values, startoptions, operator information,sequence options, …
• - Remote control (DLL, ASCII, LabVIEW, .NET, ETL DataView, Digital-IO)
• - Extension modules: matrix, AC- and DC-sources, hot HV, contact units for test object, …
• Some of the above are available at extra cost.
• - CE compliant, standard safety technology as required in BS/EN 50191