上海希言精品推荐-THERMO赛默飞世尔iCAP Q耗材选购清单3
时间:2019-08-13 阅读:2151
1323760 调谐液iCAP Q calibration solution 1
1323770 调谐液iCAP Q tune solution 1
1288090 iCAP Q Operating Manual 1
1288021 iCAP Q Preinstallation Requirements Guide 1
1600550 过滤器Inline water filter 5 μm 1
1305260 Load Coil assembly iCAP Q 1
1294680 空气过滤器Air filter iCAP Q 1
1289600 Extraction Lens 1 connector 1
1289610 Extraction Lens 2 connector 1
1277030 Linear connector - OD 4 mm 1
1332580 Autosampler housing filter assembly 1
1277070 Drip tray 1
121123010000008 Chiller - water recirculator TF-2500 IPR, 208 V, 60 Hz 1
121163010000004 Chiller - water recirculator TF-2500 IPR, 230 V, 50 Hz 1
1292160 Mounting tool for sample and skimmer cone 1
1322590 Tool for skimmer cone insert 1
1330270 Plasma coil adjustment jig 1
1310730 Extraction lens 2 - iCAP Q 1
1341380 Cold Plasma Lens Kit 1
1298450 Extraction lens 1 - cold plasma 1
1298460 Extraction lens 2 - cold plasma 1
1317120 SC-Autosampler probe, 0.5 mm ID carbon fib. sup. 1
1301560 CTFE high-flow valve head for SC-FAST, uses 1/4-28 fittings
1301570 PTFE rotor for high flow valve 1
1301580 PEEK/Teflon™ composite rotor for 6 port high-flow FAST valve
1301590 CTFE stator for 6 port valve with 1/4-28 fittings (high flow) sample uptake tube
1301600 Carrier probe, carbon fiber support, 0.5 mm ID (orange marker), port #2, 1/4-28 fittings
1301610 Internal Standard addition tee, used with ST nebulizer, 0.25 mm ID, port #3, 1/4-28 fittings
1301750 SC autosampler probe 0.50 mm (orange marker) 1
1301620 Internal Standard line, 0.5 mm ID 1
1301630 Internal Standard probe, carbon fiber support, 0.5 mm ID (orange marker), 1/4-28 fittings
1301640 Sample probe, carbon fiber support, 0.8 mm ID, 150 cm, (blue marker) (1/4-28 fitting)
1301650 Sample probe, carbon fiber support, 1 mm ID, 150 cm, (gray marker) (1/4-28 fitting)
1301690 ST Nebulizer line, 0.25 ID (green marker) 1
1301700 ST Nebulizer line, 0.5 ID (orange marker) 1
1301710 0.25 mL sample loop 1
1301720 0.5 mL sample loop 1
1301730 2 mL sample loop 1
1301740 4 mL sample loop 1
Racks 1301510 Large rack, 21 position (3×7) (30 mm) 1
1301520 Large rack, 40 position (4×10) (20 mm) 1
1301530 Large rack, 60 position (5×12) (16 mm) 1
1301540 Large rack, 90 position (6×15) (13 mm) 1
Pumps
1302480 PTFE SC-FAST vacuum pump assembly for SC-2 DX/SC-4 DX
1302470 Rinse pump for SC-2 DX/SC-4 DX pumped rinsed option