倍加福开关量输出安全栅HiD2876技术参数
时间：2016-11-16 阅读：1973
一般特性
| Signal type | Digital Output | |
| 供电 | ||
| 连接器 | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| 额定电压 | 20.4 ... 30 V via Termination Board or 20.4 ... 30 V via loop powered input , reverse polarity protected | |
| 输入电流 | 62 mA at 24 V, 300 Ω load (per channel) | |
| 功耗 | 1 W at 24 V, 300 Ω load (per channel) | |
| 输入 | ||
| 连接器 | SL1: 8a(+), 7a(-); 10a(+), 9a(-) bus powered SL1: 8b(+), 7b(-); 9b(+), 10b(-) loop powered | |
| 控制输入 | external switch (dry contact or open collector) non isolated or logic signal input fully floating | |
| 信号电平 | 1-signal: 15...30 V DC (current limited at 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open | |
| 功耗 | 1 W at 24 V, 300 Ω load (per channel) for loop powered | |
| Inrush current | 0.2 A , 15 ms loop powered | |
| 输出 | ||
| 连接器 | SL2: (+), 5b(-), 7a(+); 1a(+), 1b(-), 3b(+) | |
| 内部电阻 | approx. 280 Ω | |
| 电流 | ≥ 40 mA | |
| 电压 | ≥ 11.2 V | |
| 电流限制 | 55 mA | |
| 开环电压 | approx. 22.5 V | |
| 负载 | nominal 0.1 ... 5 kΩ | |
| 开关频率 | - bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz | |
| 通电/断电 | - bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load) | |
| Fault indication output | ||
| 连接器 | SL1: 6b | |
| 输出类型 | open collector transistor (internal fault bus) | |
| 错误电流 | 4 mA pulsing (20 ms ON, 200 ms OFF) | |
| Fault level | lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical | |
指令符合
| 电磁兼容性 | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| 电磁兼容性 | NE 21:2006 For further information see system description. | |
| 防护等级 | IEC 60529:2001 | |
| 周围环境 | ||
| 环境温度 | -20 ... 60 °C (-4 ... 140 °F) | |
| 机械特性 | ||
| 防护等级 | IP20 | |
| 重量 | approx. 140 g | |
| 外形尺寸 | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| 安装 | on Termination Board | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | CESI 10 ATEX 036 | |
| 标记 |  II (1)GD [Ex ia] IIC, [Ex iaD] [circuit(s) in zone 0/1/2/20/21/22] | |
| Certificate of Compliance | PF 10 CERT 1729 X | |
| 标记 | II 3G Ex nA II T4 | |
| 指令符合 | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA 认证 | ||
| 控制图 | 366-005CS-12B (cCSAus) | |
| IECEx approval | IECEx CES 10.0013 | |