2610为直动式、介质隔离的柱塞电磁阀。burkert 2610线圈和阀体之间通过不锈钢波纹管隔热和密封隔离，使该阀适用于*的介质温度和腐蚀性介质。电磁线圈采用耐化学腐蚀的环氧树脂封装。因此，该阀尤其适用于苛刻的介质。宝德低温电磁阀2610标准供货的电缆插头带“kick and drop”电子线路，使该阀能够打开，并在打开之后将电流减小到保持功率。与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65，不锈钢阀体式 NEMA 4X。

• 直动式介质隔离电磁阀，zui大通径 DN 12
• 焊接金属波纹管系统 (316Ti)
• 高质量 PTFE 阀座密封
• 介质温度 -200 °C …+180 °C
• 节能的 "Kick and Drop“ 电子装置

The direct-acting valve Type 2610 is delivered with circuit function normally closed. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop" electronic that supports the opening phase and afterwards reduction of the opening holding power.