多重波阻抗技术
时间:2017-07-20 阅读:5615
-
提供商
美国Gamry电化学 -
资料大小
293572 -
资料图片
-
下载次数
65次 -
资料类型
pdf -
浏览次数
5615次
时间:2017-07-20 阅读:5615
提供商
美国Gamry电化学资料大小
293572资料图片
下载次数
65次资料类型
pdf浏览次数
5615次Electrochemical Impedance Spectroscopy (EIS) has
become a standard technique in the electrochemists’
toolbox providing detailed information over very wide
time scales and amplitudes. Commercial instruments
are available that can measure impedances from mΩ
to TΩ and over frequencies from μHz to MHz.
Most commonly, EIS is measured using a “single-sine”
method where individual frequencies are measured
sequentially. One disadvantage of single-sine EIS is
the time it takes to acquire a full spectrum. A
complete sine wave cycle takes ~17 min at 1 mHz
and ~27 hrs for 10 μHz. This disadvantage can be
overcome by measuring multiple frequencies at the
same time (akin to Fourier transform spectroscopy
techniques).
This application note discusses the use of multiple sine
wave excitation in EIS and its implementation in
Gamry Instrument software. It does not cover the
basics of EIS which are described in the application
note ”Basics of Electrochemical Impedance
Spectroscopy”
(http://www.gamry。。com/App_Notes/Index.htm).