圣戈班2375与2475软管对比表
时间：2017-07-29 阅读：2828
| Tygon® 2275 vs Tygon® 2475 | ||||
| TECHNICAL DATA ANALYSIS COMPARISON | ||||
| TYPICAL PHYSICAL PROPERTIES | ||||
| Property | ASTM Method | Tygon® 2275 Value or Rating | Tygon® 2475 Value or Rating | |
| Durometer Hardness (Shore A), 15s | D2240 | 72 | 75 | |
| Tensile Strength, psi (MPa) | D412 | 2,000 (13.8) | 1900 (13.1) | |
| Ultimate Elongation, % | D412 | 700 | 850 | |
| Tensile Stress @ 100 % elongation, psi (MPa) | D412 | 350 (2.4) | 425 (2.9) | |
| Tensile Set (@ 75% of Ultimate Elongation), % | D412 | 187 | 300 | |
| Tear Resistance, lb-f/inch (kN/m) | D1004 | 220 (39.0) | 240 (42) | |
| Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hours | D395 Method B | 84 | 100 | |
| Brittle Temperature, °F (°C) | D746 | -108 (-78) | < -75 (< -59) | |
| Low Temp. Flexibility,°F (°C) | D 380 | -94 (-70) | -103 (-75) | |
| Specific Gravity | D792 | 0.9 | 0.9 | |
| Water Absorption, % 24 hrs at 73°F (23°C) | D570 | <0.01 | 0.04 | |
| Maximum Recommended Operating Temperature °F (°C) | - | 125 (52) | 130 (54) | |
| Color | - | Clear | Clear | |
| Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075” thick extruded strip or 0.075” thick molded | ||||
| ASTM plaques or molded ASTM durometer buttons. | ||||
携品牌产品，遵循高标准服务，致力成为行业高品质服务商。
瀚默科技-专注为您
更多产品请咨询我司销售人员
：