美国TEM-311-24过滤器参数和尺寸

买TEM找上海辰丁 我司代理美国TEM过滤器全系列 部分系列有现货 产品保证原厂供货 假一罚十!

美国TEM-311-24过滤器参数:

我们的多孔ePTFE过滤器提供有效的颗粒滞留3 nm。 

最高工作温度* 80°C(176°F)。 建议更换:在69ºC(156ºF)以上工作6个月。 

最大工作压力17.2 bar (250 psig) @ 20°C(68°F)。 

最大正向差压20ºC(68ºF): 6.0 bar (87 psi) 80ºC(176ºF): 4.0 bar (58 psi)  

一般和工艺惰性设施气体，用于半导体，脂肪板显示和其他高纯度应用。 G酶用于关键的脂肪板工艺，包括衬底退火。 对于关键工艺，包括前开口统一吊舱(FOUP)清洗和光刻，采用稀薄干燥的空气。  

美国TEM-311-24过滤器参数和尺寸

部分TEM过滤器型号如下：

TEM-315-16     1.0” male gasket seal inlet/outlet 15.79/401

TEM-315-24     1.5” male gasket seal inlet/outlet 15.79/401

TEM-350-16     1.0” tube stub inlet/outlet consult factory

TEM-350-24     1.5” tube stub inlet/outlet 15.19/386 

TEM-428-6      3/8” FNPT inlet/outlet 7.55/192

TEM-428-8      1/2” FNPT inlet/outlet 7.55/192

TEM-411-6      3/8” compression inlet/outlet 7.67/195

TEM-411-8      1/2” compression inlet/outlet 7.67/195

TEM-415-6      3/8” male face seal inlet/outlet 8.6/218

TEM-415-8      1/2” face seal female inlet/male outlet 8.6/218

TEM-450-6      3/8” butt weld 7.7/196

TEM-450-8      1/2” butt weld 7.7/196

TEM-450-12     3/4” butt weld 7.7/196 

TEM-528-6      3/8” FNPT inlet/outlet 5.25/133

TEM-528-8      1/2” FNPT inlet/outlet 5.77/147

TEM-528-12     3/4” FNPT inlet/outlet 5.94/151

TEM-511-6      3/8” compression inlet/outlet 5.75/146

TEM-511-8      1/2” compression inlet/outlet 5.75/146

TEM-513-8      1/2” face seal female inlet/male outlet 8.14/207

TEM-515-6      3/8” male face seal inlet/outlet 6.14/156

TEM-515-8      1/2” male face seal inlet/outlet 6.14/156

TEM-515-12     3/4” male face seal inlet/outlet 6.14/156

TEM-550-6      3/8” butt weld 5.4/137

TEM-550-8     1/2” butt weld 5.4/137

TEM-550-12    3/4” butt weld 5.4/137

TEM-711       1/4” compression inlet/outlet 3.125” (79.4mm)

TEM-711-6     3/8” compression inlet/outlet 3.125” (79.4mm)

TEM-711-8      1/2” compression inlet/outlet 3.125” (79.4mm)

TEM-713        1/4” female-male face seal 3.125” (79.4mm)

TEM-714        1/4” female face seal inlet/outlet 3.125” (79.4mm)

TEM-715        1/4” male face seal inlet/outle 3.125” (79.4mm)

TEM-723        1/4” female-male VCO* 3.125” (79.4mm)

TEM-724        1/4” female-female VCO* 3.125” (79.4mm)

TEM-725*       1/4” Male-male VCO* 3.125” (79.4mm)

TEM-811         1/4" compression inlet/outlet

TEM-811-6       3/8” compression inlet/outlet 86.9mm (3.42”)

TEM-811-8       1/2” compression inlet/outlet 99.1mm (3.90”)

TEM-812         1/4” male/female face seal 94.7mm (3.73”)

TEM-812-6       3/8” male/female face seal 115.8mm (4.56”)

TEM-812-8       1/2” male/female face seal 115.8mm (4.56”)

TEM-813         1/4” female/male face seal 94.7mm (3.73”)

TEM-813-6       3/8” female/male face seal 115.8mm (4.56”)

TEM-814         1/4” female/female face seal 94.7mm (3.73”)

TEM-814-8       1/2” female/female face seal 115.8mm (4.56”)

TEM-815         1/4” male face seal inlet/outlet 94.7mm (3.73”)

TEM-815-6       3/8” male face seal inlet/outlet 115.8mm (4.56”)

TEM-815-8       1/2” male face seal inlet/outlet 115.8mm (4.56”)

TEM-825         1/4” male/male VCO 101.9mm (4.01”)

TEM-828         1/4” FNPT inlet/outlet 90.9mm (3.58”)

TEM-828-8       1/2” FNPT inlet/outlet 107.7mm (4.24”)

TEM-829         1/4" male NPT inlet/outlet 90.0mm (3.58”)

TEM-911         1/4" compression inlet/outlet

TEM-911-6       3/8" compression inlet/outlet 89.4mm (3.52”)

TEM-912         1/4” male/female face seal 91.4mm (3.60”)

TEM-913         1/4" female/male face seal 87.8mm (3.46”)

TEM-914         1/4" female/female face seal 97.8mm (3.85”)

TEM-915         1/4" male face seal inlet/outlet 84.1mm (3.31”)

TEM-915-8       1/2" male face seal inlet/outlet 84.1mm (3.31”)

TEM-925         1/4” male/male VCO 76.2mm (3.11”)