增宜检测技术(上海)有限公司

化工仪器网中级5

收藏

Olympus奥林巴斯NORTEC 500/600涡流探头传感器大全

时间:2020-03-02      阅读:4298

Olympus奥林巴斯NORTEC 500/600涡流探头传感器大全

如果您在选择探头上有任何疑问,欢迎联系我们-增宜检测技术(上海)有限公司,我们资深的探头工程师一定能帮您找出适合您的探头。

Display NameUPC CodeDescription
Q33009710.5L64-96X22-I5-P-5-OM 
U884016003208064 mil Shim Samples (set of 2)
U87790680321004Thickness Gage assortment. 5 in. long 13 sizes between .001 Inch and .030 Inch
Q250109010-006806-00 
U89904441823234"V-notch" collar to aid in holding probe on rounded surface. For use with "P/X-X/X" series.
 
U825000518BE0007Teflon tape, 0.002 inch thick x 1/4 inch wide (36 yards)
Q33009701L64-96X22-I5-P-5-OM 
U877966828GA5208Gel sheet 12'' x 12'' x 0.5''
U89013653303965Teflon Tape - 1/4 in.
U89013663304920Roll of Teflon Tape (1 in.)
U83307117.5L16-4.96X5-A00-P-2.5-OMStandard Phased Array Probe, 7.5 MHz Linear Array, 16 Elements, 4.96x5 mm Total Active Aperture, 0.31 mm Pitch, 5 mm Elevation, A00 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector  
U88000419102894Cable, 6 foot length, BNC to Microdot cable
U88000489113016"Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to NDT-19, NDT-24 instruments with 8 Pin Burndy connector.

 

Model: C/SC/6"
 
U88000509113429Cable, 6 foot length, Reflection coil configuration for probes with Fischer/Lemo Triaxial connector to 8 Pin Burndy (CR/SC/6)
U88000539116184Cable, 8 foot (2.4 Meter) length, 8 pin Burndy connector to dual microdot connector. Used to connect adjustable sliding probes to the NDT-19 and NDT-24 series instruments, reflection coil configuration.
U88000589117789BondMaster cable - SBM-CPM-P11 11 pin to 11 pin cable used on Pitch Catch and MIA probes
U88000599117790BondMaster cable - SBM-CR-P6 11 pin to 6 pin cable used on Resonance probes.
U88000629118328Cable 6 foot length, Reflection coil configuration probes with Triax Fischer/Lemo to Elotest 8 Pin Fischer. 
U88000639118388 
U88000649118630 
U88000739122083Cable, 6 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000 , N500 ro N600 series instruments. (CL/SC/6)
 
U88000759122089Scanner Cable, 8 foot 6 inch length, MiniMite, RA 2000 and Spitfire 2000 to Nortec 2000/3000 and Nortec 500S/D  - right angle
U88000769122090Scanner Cable, 8 foot  6 inch length, MiniMite, RA 2000, Spitfire 2000 and PS-5AL to Nortec 2000, Nortec 500S/D Scanner cable. (Requires modification to PS-5)
U88000829122200Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 12 Pin Lemo (Hocking Phasec 2200)
U87790129122205SPO-2182 DUAL MD REFLECTION TO ELOTEST
U88006589122207CR/SC/6 Phasec 2200
U88000869122229Universal Battery Charger (UBC) to Li-Ion instrument cable - Nortec 2000S+, Nortec 2000D+ or B1000e+
U88000879122230Universal Battery Charger (UBC) to Ni-MH instrument cable - Nortec 1000/2000 series or BM1000
U88000919122244Cable, 6 foot length, Bridge coil configuration, 16 Pin Lemo to Fischer/Lemo Triax  (SPO-6472)
U86003449122245Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 4 Pin Fisher connector, for use with MIZ21 (C/SC/6 MIZ21)
U88000959122267Cable, 6 foot length, Reflection coil configuration probes with 4 Pin Fischer connector to Nortec 500, 600 and 2000 series instruments with 16 Pin LEMO.

 

Model: SPO-6388
 
U87790799122348"Cable, 6 foot length, 4pin Fischer (MIZ21) to PowerLink Bridge coil configuration probe.

 

Model: F4-L7-B-6"
 
U88007449122354"Cable 30 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000, N500 or N600 series instruments.

 

Model: CL/SC/30"
 
U88008789122360Scanner Cable, 16PL-12PL  Hocking Mini-Rotor Scanner cable for use with N500 or N600. 
 
U88011349122390Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Phasec instrument (12 pin Lemo). This item supersedes P/N CH22-7L-6.
Q25000809122405 
U86290419204413 
U86231489213013Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a  0.50" drop. Total length of 6 inches. (Right Angle Pencil Probe)
U86231539213403 
U86231549213404 
U86231599213409Nortec Standard Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (P/1Mhz-2Mhz/A)
U86231709213420 
U86231739213423 
U86230019213546Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-2132), Triax Fischer/LEMO Connector
U86230029213547Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), Triax Fischer/LEMO Connector
U86230059213550Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), Triax Fischer/LEMO Connector
U86230069213551Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80 kHz (equivalent to APR/8/S, SPO-2026), Triax Fischer/LEMO Connector
U86230079213552.01Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 60 kHz (equivalent to APBK/10.5/S, SPO-2025), Triax Fischer/LEMO Connector
U86230089213553Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .50 in. (12.7 mm) and a operating range of 300 Hz - 40 kHz (equivalent to APB/12.5/S, SPO-2136), Triax Fischer/LEMO Connector
U86230099213554Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S. SPO-2134), Triax Fischer/LEMO Connector
U86020049216156 
U86231789216191Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Straight through shaft. Total length of 4 inches. (P/100Khz-500Khz/A/0.0/4)
U86232149216216Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -100kHz,  triax Fischer/LEMO connector, unshielded bridge coil configuration.

 

Model: P/50Khz-100Khz/AU/90.50/6
U86231899216220Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (P/50Khz-100Khz/A/90.5/6)
U86230119216541Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 100 kHz - 500 kHz, Triax Fischer/LEMO Connector
U86700379216633 
U86140919217153Rotating Scanner Probe, SPO-3564, Probe Diameter 0.187 in. - 0.218 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564 .187-.218)
U86140929217154Rotating Scanner Probe, SPO-3564, Probe Diameter 0.218 in. - 0.250 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86140939217155Rotating Scanner Probe, SPO-3564, Probe Diameter 0.250 in. - 0.281 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86140949217156Rotating Scanner Probe, SPO-3564, Probe Diameter 0.281 in. - 0.312 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86140959217157Rotating Scanner Probe, SPO-3564, Probe Diameter 0.312 in. - 0.375 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86140969217158Rotating Scanner Probe, SPO-Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564), .375 -.437 1.5 in WL
U86140979217159Rotating Scanner Probe, SPO-3564, Probe Diameter 0.437 in. - 0.500 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86140989217160Rotating Scanner Probe, SPO-3564, Probe Diameter 0.500 in. - 0.562 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (PO-3564)
U86330039217891SPO-5330   SR/100Hz-20Khz/.62
U86330049217896Low frequency detachable shielded "reflection" surface probe, 5/16 inch (7.9 mm) diameter x 2 in. (5.08 mm) tall. Operates between 700 Hz and 80 kHz with Triax Fischer/ Lemo connector.

 

SPO-5327 SR/700HZ-80KHZ/.31
 
U86330059218108SPO-5328 Spot Probe, 500 Hz to 60 kHz, Corrosion Probe, 11.2 mm (0.44 in.) diameter, Triax Fischer/LEMO Connector
U86291289218203SPO-5329 300Hz-40KHz .50
U86295379218204SPO-5326 2KHz-200Khz/.25 Special Purpose Corrosion Probe Designed for use on Aluminum structures
U86900149218430SPO-1958 Sliding Probe with Elotest Cable
U86295439218631 
U86141019218787Rotating Scanner Probe, SPO-3564, Probe Diameter 0.687 in. - 0.750 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86102309219978Universal Rotary Hole Probe 0.375 inch (9.5mm)  to 0.437 inch (11.0mm) diameter, Self Expanding 2 inch (50 mm) working length. Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .375-.437)
U86102319219979Universal Rotary Hole Probe 0.187 inch (4.7mm)  to 0.218 inch (5.5mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .187-.218)
U86102329219980Universal Rotary Hole Probe 0.218 inch (5.5 mm)  to 0.250 inch (6.3mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .218 - .250)
U86102339219981Universal Rotary Hole Probe 0.250 inch (6.3 mm)  to 0.281 inch (7.1mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .250 - .281)
U86102349219982Universal Rotary Hole Probe 0.281 inch (7.3 mm)  to 0.312 inch (7.9 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .281-.312)
U86102359219983Universal Rotary Hole Probe 0.312 inch (7.9 mm)  to 0.375 inch (9.5 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .312-.375)
U86102369219984Universal Rotary Hole Probe 0.437 inch (11 mm)  to 0.500 inch (12.6 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .437-.500)
U86102379219985Universal Rotary Hole Probe 0.500 inch (12.6 mm)  to 0.562 inch (14.2 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .500-.562)
U86102389219987Universal rotary hole probe 0.250 inch (6.3mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration.





Model: SPO-5393 1/4 2IN WL
U86102399219988Universal rotary hole probe 0.281 inch (7.1mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration.





Model: SPO-5393 9/32 2IN W/L
U86102509219999Universal rotary hole probe 0.156 inch (3.9mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration.





Model: SPO-5393 5/32 2IN W/L
U86102519220000Universal rotary hole probe 0.187 inch (4.7mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration.





Model: SPO-5393 3/16 2IN W/L
U86260039222160Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S, SPO-2134), 7-pin LEMO Powerlink Connector
U86260049222161Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector
U86260249222162Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 500KHz- 1MHz (PL/500KHZ-1MHZ/A)
U86260259222163Nortec Powerlink Detachable Pencil Probe. Detachable reflection Differential Shielded with a frequency range of 500KHz- 3MHz (PRL/500Khz-3Mhz/D)
U86160949222165Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/50Khz-100Khz/A/0.0/4)
U86260279222180Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 100KHz- 500KHz (PL/100Khz-500Khz/A)
U86260289222181Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (PL/1Mhz-2Mhz/A)
U86260299222184Nortec Powerlink Detachable Pencil Probe. Detachable Differential Shielded with a frequency range of 500KHz- 2MHz (PL/500Khz-2Mhz/D)
U86260069222193Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 300 Hz - 10 kHz (equivalent to SPO-565, SPO-1125), 7-pin LEMO Powerlink Connector
U86260079222196Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector
U86260109222200Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80kHz (equivalent to APR/8/S, SPO-2026), 7-pin LEMO Powerlink Connector
U86260119222201Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), 7-pin LEMO Powerlink Connector
U86160959222202Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/100Khz-500Khz/A/0.0/4)
U86160969222204Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/100Khz-500Khz/A/90.03/6)
U86160999222207Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-1MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches. (ML/500Khz-1Mhz/A/90.25/6)
U86260479222209 
U86161029222214Reflection Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches.(MRL/500Khz-2Mhz/A/90.25/6)
U86161039222215Reflection absolute shielded metal shaft detachable pencil probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 6 inches (15.2cm). (MRL/50Khz-500Khz/A/90.5/6)
 
U86161049222216Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.50" drop. (MRL/500Khz-2Mhz/A/90.5/6)
U86091609222217 
U86091619222218 
U86091629222219 
U86091639222220 
U86340509222237 
U86231949222308Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 100 kHz - 500 kHz, 7-pin LEMO Powerlink Connector
U86260539222337Bridge Absolute Shielded Flexible Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle shaft with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6FX).
U86900279222340Conductivity Probe, 60 kHz, Right Angle Probe, 0.750 in. (20 mm) tip diameter, 1.00 in. (25.4 mm) length, 16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, 600S, 600D, 1700, 2000, 3000, and WorkStation instruments. Includes Alarm LED.
U86900289222341Conductivity Probe, 480 kHz, Right Angle,.750 in. (20 mm) tip diameter,  16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, S or D instruments. Includes Alarm LED.
U86700439222342 
U86260549222355Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink", Operates on a 50Khz-500Khz and has a center frequency of 200Khz, 45 degree angle, 0.50 in. drop with a 0.125" diameter tip. 6 inch overall length. (ML/100KHZ-500KHZ/A/45.5/6)
U86900299222360SPO-887L Conductivity Probe, 60 kHz, Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector
U86900309222361Conductivity Probe, 480 kHz , Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector
U86260129222456Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), 7-pin LEMO Powerlink Connector
U86161069222473Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.03/6 Probe)
U86161089222476Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.5/6 Probe)
U86102669230035Universal rotary hole probe 0.218 inch (5.5mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration.



Model: SPO-5393 7/32 2IN W/L
U86102679230061Universal Rotary Hole Probe 0.156 inch (3.96 mm)  to 0.187 inch (4.7 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .156-.187)
U86140599230078Rotating Scanner Probe, SPO-3564, Probe Diameter 0.156 in. -0.187 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U86291469230150 
U86102539230157Universal Rotary Hole Probe 0.625 inch (15.8 mm)  to 0.687 inch (17.4 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .625-.687)
U86161229230174Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink"  Right Angle shaft with a 0.50" drop. Operates on a 100KHz-500KHz frequency range. Total length of 3 inches (ML/100KHZ-500KHZ/A/90.5/3).
U86300089230193SPO-1071L Probe Right angle 1Khz-10Khz frequency 0.31 inch (7.8mm) diameter surface probe, bridge coil configuration with integral 6 foot (1.8m) 16 Pin Lemo cable.
U86142849230238"PowerLink straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.

 

Model: ML/50KHZ-500KHZ/A/0.0/4"
 
U86260619230248Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" straight through shaft. Operating frequency 100 Khz-500Khz. 3 inch overall length. (ML/100KHZ-500KHZ/A/0.0/3)
U88007389230259Cable, 6 foot (1.83 Meter) length, 16 pin LEMO connector to Microdot connector with 120uH balance coil (50kHz).
 
U86260629230289"Straight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 100kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.

 

Model: ML/100KHZ-500KHZ/A/0.0/6"
 
U86290949230334"Ring probe, 0.53 inch (13.4mm) ID X 0.88 inch (22.3cm) OD. Operating frequency 100Hz -10kHz. Integral 6 foot (1.8m) cable with 16 pin Lemo connector, reflection coil configuration.

 

Model: SPO-2434L"
 
U88006379230374SPO-2182 Dual Microdot Reflection to 16 Pin LEMO cable for adjusting sliding probes.
 
U86142859230384PowerLink right angle 'flexible' metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration.

 

Model: ML/50KHZ-500KHZ/A/90.2/6FX
U86142869230385"PowerLink right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.

 

Model: ML/50KHZ-500KHZ/A/90.5/5B"
 
U86109859230387"Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.

 

Model: ML/50KHZ-500KHZ/A/0.0/3"
 
U86290909230388Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" Flexible straight shaft. Operating frequency 50Khz-500Khz, 4 inch overall length (ML/50KHZ-500KHZ/A/0.0/4FX)
U86293019230392Adaptor, LEMO 16 Pin to Burndy 8 Pin, Bridge/Reflection Probe Type
U86295389230395SPO-5326L 2Khz-200Khz Special Purpose Corrosion Probe Designed for use on Aluminum structures
U86291579230403SPO-5328L 500HZ-60KHZ .44
U86291639230492SPO-3806 Sliding Probe Reflection (Probe Only) Triax Lemo connector.
U86102809230531Universal Rotary Hole Probe 0.125 inch (3.17 mm)  to 0.156 inch (3.96 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .125-.156)
U8800739923058516 Pin LEMO to Microdot with Balance Coil 8.2UH cable, 6 foot long (1.8m) for single coil microdot probes operating between 1MHz - 2MHz .
 
U86700059230721 
U86141099230784Rotating Scanner Probe,SPO-3564, 200 kHz - 3 MHz , .125 in. to .156 in. hole size range, 1.1 inch working length, 4 Pin LEMO Connector?
U88007419230844SPO-6599, 16 pin LEMO to dual BNC connectors, 6 inches (15.2cm) long.
 
U8800703923084516 Pin to Microdot NPID-1024 cable – No balance coil – To be used with Nortec 2000D+ or N500 series instruments with internal balance coils. Not to be used with N600 series instruments. 
U86330679230977 
U86291809230982SPO-1958 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors.
U86103999230985SPO-2210 (PROBE ONLY)
U86294769230999.00 
U86700119231075 
U86295409231109NECP-1152 SS, Weld Probe,  Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, 45 Degree, 7.9 mm (0.312 in.) Tip Diameter, Overall length 140.0 mm (5.5 in.), Triax Fischer/Lemo connector.
U86104109231147Ring reflection probe with Fischer/ Lemo triax connection, 100Hz-1KHz

frequency range (SPO-6087)
U86294979231155Special purpose metal shaft probe. 5 inch overall length with 0.065 to 0.075 inch thick flat shaft 3 inches long. Side mounted 100 KHz shielded coil (0.125 inch diameter), microdot connector, absolute coil configuration. (SPO-3503)
U86292119231350P/50KHZ-500KHZ/A/90.5/5
U86299929231640PowerLink right angle "flexible" metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 100KHz -500KHz, 7 pin Lemo connector, bridge coil configuration (ML/100KHZ-500KHZ/A/90.5/4FX).
U82501019231641 
U86293819231646 
U86260399231662Reflection Absolute unshielded Metal Detachable Pencil Probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50" drop and bent stainless steel shaft. Total length of 6 inches. (MRL/50Khz-500Khz/Au/90.5/6BSS)?
U86298849231812SPO-1957 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors.
 
U86106789231813"Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 100kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.

 

Model: ML/100KHZ-500KHZ/A/90.2/4"
 
U86106819231821PowerLink right angle metal shaft surface probe, 4 inch

overall length with 0.2 inch drop at tip. Operating

frequency 100KHz -500KHz, 7 pin Lemo connector,

differential bridge coil configuration. Probe is direction

sensitive and operates from right to left motion (Wiper

Mode "WP"), (ML/100KHZ-500KHZ/D/90.20/4/WP).
Q67000049323976 
U86900339403356Weld Probe, 100 kHz - 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diameter, 5.5 cm (2.16 in.) length, 7-pin LEMO PowerLink Connector (WLD-8-55-7L)
U86295269403359Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/50Khz-500Khz/A/0.0/4)
U86295309403360Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz)
U86292699403361Paint Thickness Probe, 5 kHz to 250 kHz, 6.35 mm (0.25 in.) tip diameter, 10.1 mm (4.0 in.) overall length, 7-pin LEMO PowerLink Connector.
U86292709403362Straight Weld Probe, 100 kHz to 600 kHz, 5.0 mm (0.196 in.) tip diameter, 6.1 mm (2.4 in.) overall length, 7-pin LEMO PowerLink Connector (WLD-5-63-7L)
U86161499403364"Straight metal shaft surface probe, 4 inch (10.1cm) overall length with 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -3MHz,  7 pin LEMP (PowerLink) connector, bridge coil configuration.

 

Model: MM7L-40FX-1M-3M"
 
U86142969403372PowerLink right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration.

 

Model: M7L905-40
U86295399403373Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), 7 Pin LEMO connector. (WLD90I-5-50-7L
U8690038940337490 degree inline weld surface probe, 100 KHz to 600 KHz, 8.0 mm (0.314 inch) tip diameter, 5.0 mm (0.196 inch) overall length, 7 pin LEMO PowerLink connector. (WLD90I-8-50-7L)
U86330279403377NEC-4039-7L
U86290619403383Right angle surface pencil probe with 7 pin Lemo (PowerLink) connector. Absolute shielded coil operating between 50KHz and 500KHz (200KHz center frequency). 6 inch (15.2cm) overall length with 0.50 inch (12.7mm) drop at probe tip (M7L905-60).
U86261259403398PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 1MHz -6MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-1-6M).
U86261269403399PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 200KHz -1MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-200K-1M).
U86261279403400Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -6MHz,  LEMO 7 pin (PowerLink) connector, bridge coil configuration.



Model: M7L-30-1-6M
U86295279403403Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/200Khz-1Mhz/A/0.0/4)
U86295289403404Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 1 MHz - 6MHz frequency range and has a center frequency of 2 Mhz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/1Mhz-6Mhz/A/0.0/4)
U86295299403405Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz)
U86203999403406Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz)
U86295319403408Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/EMO "PowerLink", Operates on a 200 KHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz)
U86295329403409Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz)
U86295339403410Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz)
U86295349403411Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz)
U86295359403412Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz/A/90.5/6)
U86295229403421 
U86297229403425PowerLink forty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7cm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.

 

Model: M7L455-60
U86299209403431 
U86296969403444"Right angle metal shaft surface probe, 6 inch (15.2cm) overall length, 0.5 inch (12.7mm) drop and 0.094 inch (2.39mm) diameter at the tip. Operating frequency 200kHz -1MHz,  7 pin Lemo connector, bridge coil configuration.

 

Model: MY7L905-60FX-200K-1M"
 
U86296989403445Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz, 7 pin LEMO connector, bridge coil configuration.

Model: MM7L903-50
U86297079403446 
U86109189403447 
U86109689403455Right angle metal shaft surface probe, 3 inch overall length with 0.2 inch drop and 0.072 inch diameter at tip. Operating frequency 50KHz -500KHz, Lemo 7 pin (PowerLink) connector, bridge coil configuration (MM7L902-30).
U86109729403456 
U86161509403460 
U86161519403495 
Q25004459403540" Right angle metal shaft surface probe, 7 inch (17.7cm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 50kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.

 

Model: M7L901-70 "
 
Q25011359403568 
U86293279522189Adaptor, LEMO 16 Pin  to  Amphenol 4 Pin,  Bridge Probe Type



Model: L16-A4-B and AN16-Z
U86292789522205AH22-BR 12P LEMO To 8 Pin Burndy Adapter
U87673179522211Adaptor, reflection coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO)



Model: L16-L12-R & ARN16-H22
U87673189522212Adaptor, bridge coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO)



Model: L16-L12-B & AN16-H22
U87672979522213Adaptor, Bridge coil configuration probes with 4 pin Fischer connector to Nortec 500/1000 or 2000 instruments (16 Pin Lemo)



Model: L16-F4-B & AN16-Z21
U87790759522214Adaptor, Reflection coil configuration probes with 4 pin Fischer connector to Nortec 500, 600, 1000 or 2000 instruments (16 Pin Lemo)



Model: L16-F4-R & ARN16-Z21
U87671669522218Adaptor, LEMO 16 Pin to LEMO 7 Pin, Bridge Probe Type
 
U87671679522219" Adaptor, LEMO 16 Pin to LEMO 7 Pin, reflection coil configuration probes only.

 

Formerly P/N ARN16-HLC2 (NDT Engineering). "
 
U8840093ACB1-TF-6-1-50K 
U8767206AMF-M-10FXStraight flex adaptor, Microdot to Microdot connector, 10 inches (25.4cm) long.
 
U8767209AMF-MR-8FX 
U8600002BPM-10-TFManual hole probe, 0.156 inch (3.9mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, triax Fischer/LEMO connector, bridge coil configuration.
U8600003BPM-12Manual hole probe, 0.187 inch (4.7mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600565BPM-14-TF 
U8600007BPM-16 
U8600566BPM-18-TF 
U8600011BPM-20Manual hole probe, 0.312 inch (7.9mm) diameter and 2.0 inch (5.08cm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600017BPM-24Manual hole probe, 0.375 inch (9.5mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600018BPM-28Manual hole probe, 0.437 inch (11.1mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600022BPM-32Manual hole probe, 0.500 inch (12.7mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600024BPM-36Manual hole probe, 0.562 inch (14.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600025BPM-40Manual hole probe, 0.625 inch (15.8mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600459BPM-44Manual hole probe, 0.687 inch (17.4mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600027BPM-48Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration.
U8600029BPM-52Manual hole probe, 0.812 inch (20.6mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600030BPM-56Manual hole probe, 0.875 inch (22.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600564BPM-8-TF 
U8600571BPMD-10-TF 
U8600573BPMD-14-TF 
U8600570BPMD-8-TF 
U8600804BPRA-10-SS-1.1WLRotary Hole Probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.156 inch (3.9mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8250285BPRA-10-SS-1.5WL 
U8614010BPRA-12-SSRotary hole probe, stainless steel housing for use with RA-19, RA-2000 and MiniMite Lemo scanner series. 0.187 inch (4.74mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8610701BPRA-14-SSRotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.218 inch (5.54mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8600434BPRA-16-SSRotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.250 inch (6.3mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
 
U8614237BPRA-20-SS 
U8614019BPRA-40-SS 
U8614025BPRA-8-SSRotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.125 inch (3.1mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
 
U8614026BPRAF-10 
U8614027BPRAF-12 
U8614252BPRAF-16 
U8610006BPU-10-SS 
U8610022BPU-14-SS 
U8610029BPU-16-SSUniversal rotary hole probe stainless steel housing, 0.250 inch (6.35mm) diameter, 2.0 inch (5.08cm) working length. Operating frequency 100kHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8600187BPU-8-SS 
U8610098BPUF-12 
U8600094BXM-12-16 
U8600098BXM-16-20 
U8610146BXU-12-16Universal Rotary Hole Probe 0.187 inch (4.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610151BXU-16-20Universal Rotary Hole Probe 0.250 inch (6.3mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
 
U8610152BXU-20-24Universal Rotary Hole Probe 0.312 inch (7.9mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610153BXU-24-28Universal Rotary Hole Probe 0.375 inch (9.52mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8610154BXU-28-32 
U8610155BXU-32-40Universal Rotary Hole Probe 0.500 inch (12.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
 
U8610159BXU-40-48 
U8610160BXU-48-56 
U8614053BYRA-8-10 
U8610182BYU-12-16-2WL 
U8610194BYU-24-28Universal Adjustable Hole Probe, 3/8" to 7/16"
U8250276BYU-88-96 
U8270128CAB-032-OM2_532 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 2.5M
U8779664CAB-032-OM532 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 5M
U8779669CABR2-030-OM2_530 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 2.5M
U8779665CABR2-030-OM530 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 5M
Q7670051CBAS-10818-0001 
Q7670054CBAS-10821-0001 
U8800232CBM-6Cable, 6 foot length, Microdot to BNC
U8800241CBN-TF-6 
U8800244CBR-4SL-6Cable, 6 foot length, Bridge coil configuration for probes with 4pin step lemo connector to 8 Pin Burndy instruments.
 
Q8000034CBR-M-6-1-3M 
U8800258CH22-2M-6Cable, 6 foot length, Bridge coil configuration for probes with 2 pin Microdot to connect to Hocking Phasec 2200 and Phasec 2s and 2d (12 Pin)
U8800896CH22-4F-6Cable, 6 foot length, for Hocking Phasec 2200 or Phasec 2s, 2d or 3d to 4-pin Fischer.
 
U8690040CH22-M-6Cable, 6 foot length, Bridge coil configuration with 12 Pin Lemo connector to Microdot connector for Hocking Phasec 2200 and Phasec 2.
U8800891CH22-M-6-50-500KCable, 6 foot length, absolute coil configuration probes with microdot connector to Phasec/ Locator instrument (12 pin Lemo). Contains internal balance coil to operate probes in the 50KHz-500KHz frequency range.
U8861298CIRCLETEMPLATECircle Template
U8800273CN16-2M-6Cable, 6 foot length, Bridge coil configuration, Nortec 16 Pin (Inst) to 2-Pin Microdot-Bridge
U8800275CN16-4F-6Cable, 6 foot length,  Bridge coil configuration, Nortec 1000, 2000 and 500 series instruments  (16 pin Lemo) to 4pin Fischer
U8800276CN16-4L-6Cable, 6 foot length, Nortec 1000, 2000 and 500 series instruments (16 pin Lemo) to 4 Pin Lemo for Weld Probe (4 Pin LEMO)
U8800278CN16-M-6-200K-1MCable, 6 foot length, Nortec 1000, 2000 and 500 series instruments with  balance coil for probe between 200Khz-1Mhz.
U8800666CN16-MR-6-50-500KCable, 6 foot length, bridge coil configuration probes with single right angle microdot connector to N500 or N2000 instrument (16 pin Lemo). Allows operation of 50kHz-500kHz single pin microdot probes on the Nortec eddy current instruments listed above. Not required for N600 instruments.
U8801390COS-7L-6Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Omniscan instrument (19 pin Lemo).
U8800284COS-TF-6Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for differential.
U8800397CRH22-2M-6Cable, 6 foot length, 12 Pin Lemo to 2 Pin Microdot  for Hocking Instruments
U8800405CRN16-2M-6Cable, 6 foot length, Reflection coil configuration, Nortec 16 Pin (Inst.) to 2 Pin Microdot
U8800814CRN16-4L-6Cable 6 foot length, reflection coil configuration probes with 4 pin Lemo connector to N600/N500/N2000 instrument (16 pin Lemo).
 
U8801083CRN16-TF-15Cable, 15 foot (4.5 Meter) length, 16 pin LEMO connector to triax Fischer/LEMO connector, reflection coil configuration.
U8800411CROS-TF-6Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for reflection.
U8600132CSM100-10Manual rotary 100 degree countersink hole probe with plastic housing, 0.156 inch (3.9mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration.
U8600134CSM100-12Manual rotary 100 degree countersink hole probe with plastic housing, 0.187 inch (4.7mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration
U8600608CSM100-14Manual rotary 100 degree countersink hole probe with plastic housing, 0.218 inch (5.1mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration.
U8600135CSM100-16 
U8602103CSRA100-6.35M 
U8602101CSRA100-8.7M 
U8602166CSU100-4.0M-SSUniversal rotary 100 degree countersink hole probe with stainless steel housing, 4.0mm (0.157 inch) diameter pilot. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8600979CSU100-5.0M-SSUniversal rotary 100 degree countersink hole probe with stainless steel housing, 0.196 inch (5.0mm) diameter. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8800414CZ21-2M-6Cable 6 foot length, reflection coil configuration probes with two single pin microdot connectors to Zetec Miz 21 instrument (4 pin Fischer).
U8800419CZ21-M-6-50-500KCable
U8779886DGL-AF4-BNC-8Cable adapter, 8 inch length, 4 pin amphenol female connector to BNC male connector.
 
Q2700001E400090A"Reversed coil order  -ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils     
"  
U8779368ENC1-K-ECAEddy Current Array Probe encoder with full holder, 2.9 m cable with DE15 connector type
U8800620EWSX280AEncoder cable
U8270083FBB-051-500-032ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils
Q2700031FBB051-KIT-FLAT-R2FlexArray probe kit for flat surface, reflection cable and encoder included  
U8270155FBB051-KIT-PIPEFlexArray Probe kit detection of SCC on 33.4 mm OD pipe and over
Q2700030FBB051-KIT-PIPE-R2FlexArray probe kit detection on 33.4 mm OD pipe and over, reflection cable and encoder included  
U8270154HSB-01Bond Testing Hand Scanner with cable, and encoder (S-PC-P14 probe NOT included)
U8270153HSB-SPCP14Bond Testing Hand Scanner with S-PC-P14 probe, cable, and encoder
Q7670041HX-ADPT-KIT 
U8610458LP903-50B-1-30KLow Frequency Probe
U8610459LP903-50B-TF-1-30KLow frequency right angle pencil probe with "bent" metal shaft. 0.187 inch (4.7mm) diameter, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Frequency range 1kHz-30kHz, bridge coil configuration, triax Fischer/Lemo connector.
 
U8610461LP905-40-TF-1-30KLow Frequency Probe
Q2500823LPQ-60-TF-1-30K 
U8610469LPQ905-40-TF-1-30K 
U8610471LPQ905-50B-TF-1-30KLow Frequency Probe
U8610962LPQ905-50B-TF-30-50K 
U8634054LS042-1 
U8634062LS203-1Low frequency right angle spot probe, 0.275 inch (6.9mm) diameter with a frequency range of 1kHz-8kHz. Bridge coil configuration, 2 pin microdot connector.
Q6330001LS204-1-TF 
U8633026LTW1022Low Frequency Sliding Probe
U8690010LTW5010-1Reflection Sliding Probe, Adjustable, 1 kHz to 20 kHz, (2) 1-pin Microdot Connector
Q2500591MagnaFORM-KIT-MANUAL 
Q2500592MagnaFORM-KIT-SCANNERS 
U8270174MESX320ECA advanced calibration plate with surface notch, Aluminium  
  
U8779537MESX321ECA advanced calibration plate with surface notch, Stainless Steel 316 material  
U8616093ML/100KHZ-500KHZ/A/90.5/6Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6).
U8620002MMP-30Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072 inch (1.83mm) diameter tip. Total length of 3 inch (76mm).
 
U8616365MMP-30-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 3 inches (7.62cm).
U8616366MMP-30-200K-1MStraight metal shaft surface probe, 3 inch (7.6cm) overall length and 0.072 inch (1.8mm) diameter at tip. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620006MMP305-45Thirty degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620009MMP305-60Absolute shieleded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz, 30 degree shaft, 0.5in (12.7mm) drop with a 0.072" (1.83mm) diamerter tip. 6" (152mm) overall length.
U8610623MMP-30FX 
U8616367MMP-30FX-1-3M 
U8620010MMP-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8616153MMP-40FX 
U8616154MMP-40FX-200K-1M 
U8620280MMP455-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Forty-five degree angle shaft with a 0.50" (12.7mm)  drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8620443MMP455-40-6MAbsolute shielded metal shaft microdot detachable pencil probe. Operates at a frequency of 6MHz . Forty-five degree angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.83mm) diameter tip. Total length of 4 inches (102mm).
 
U8620302MMP-60Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
U8620016MMP-60-1-3M 
U8620017MMP-60FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
U8616344MMP9003-60FXAbsolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.03 inch (0.76mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm).
U8620021MMP902-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 4" (102mm).
U8620278MMP902-40-1-3M 
U8620415MMP902-50FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 5" (203mm).
 
U8620027MMP902-60Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 6" (152mm).
U8620385MMP903-60 
U8620376MMP905-30Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 3" (76mm).
U8620034MMP905-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8616361MMP905-60-200K-1MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500kHz. Right angle shaft with a 0.5 inch (12.7mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm).
 
U8629993MMP905-60BAbsolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches (15.2cm).
U8623013MMTF305-40Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 4.0 inches.
U8623016MMTF305-50Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 5.0 inches.
U8623019MMTF-40Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Straight shaft with a 0.072 inch diameter tip. Total length of 4.0 inches.
U8623239MMTF-40-200K-1MBridge shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 4 inches (10.1cm). 
U8616427MMTF455-40-200K-1M 
U8610624MMTF455-60Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches.
U8616415MMTF901-60FXRight angle "flexible" metal shaft surface probe with 0.072 inch (1.8mm) diameter probe tip. 10 inch (25.4cm) overall length with 0.10 inch (2.54mm) drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623240MMTF902-40Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 50kHz -500kHz,  triax Fischer\Lemo connector, bridge coil configuration.
 
U8616417MMTF902-40B 
U8620340MMTF902-50FX-200K-1MRight angle "flexible" metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.83mm) diameter at tip. Operating frequency 200kHz -1MHz (500KHz center frequency), Fischer/Lemo triax connector, bridge coil configuration.
 
U8614311MMTF902-60-1-6M 
U8623242MMTF905-40 
U8623322MMTF905-40-1-6M 
U8623033MMTF905-60Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches.
U8610492MMTF905-60-1-6MRight angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -6MHz,  triax Fischer\LEMO connector, bridge coil configuration.
U8250184MMTF905-60-200K-1MAbsolute shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Right angle shaft with a 0.50 inch (12.70mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches..
U8620303MP.045-60BLAbsolute shielded metal shaft microdot detachable blade probe with a surface of .045. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620047MP-10Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with 0.125" (3.18mm) diameter tip. Total length 1 inches.
U8610997MP10B15-9003-60-200K-1M 
U8620052MP-20Straight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8620342MP-20-200K-1MStraight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
 
U8620053MP-30Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8620055MP-30-1-3MStraight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8616291MP302-60 
U8620059MP305-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 30 degree shaft, .50in (12.7mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. 4" (102mm) overall length.
U8616288MP305-50-1-3M 
U8620312MP305-50-200K-1M 
U8620062MP305-60 
U8610715MP305-60-1-3M 
U8620067MP-40Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8620068MP-40-1-3MStraight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8620069MP-40-200K-1MStraight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
 
U8610891MP-40FX-1-3M 
U8610837MP-45Straight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8616298MP4510-40 
U8620076MP-45-1-3MStraight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8620079MP453-40-1-3M 
U8610767MP453-45Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 45 degree shaft, 0.3" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. 4.5" (114mm) overall length.
Q2500718MP453-45-1-3MForty-five degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8623373MP453-60-1-3MForty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8629678MP453-60-200K-1MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 200KHz-1MHz frequency range and has a center frequency of 500 KHz. 45 degree angle shaft with a 0.30"  drop and a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
 
U8610497MP455-120FX-200K-1M 
U8616295MP455-30-1-3M 
U8620086MP455-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620087MP455-40-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620088MP455-40CAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620089MP455-45Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8620090MP455-45-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8620094MP455-50Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8620346MP455-50-1-3M 
U8629762MP455-50-200K-1M 
U8620095MP455-50C 
U8620097MP455-60Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620099MP455-60CAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620106MP457-60Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.70" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620108MP-50Straight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration
 
U8620403MP-50-200K-1M 
U8610632MP-60-200K-1MStraight metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
 
U8620114MP-60FXStraight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8620115MP-60FX-1-3MStraight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8616209MP9003-50B 
U8620348MP9003-60Right angle metal shaft surface probe, 6 in. overall length and 0.03 in. drop at tip. Operating frequency 50 kHz - 500 kHz, microdot connector, absolute bridge coil configuration.
U8620398MP9003-60-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1 MHz - 3 MHz frequency range and has a center frequency of 2 MHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620397MP9003-60-200K-1MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620142MP901-40 
U8620144MP901-40FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8616211MP901-50-1-3MRight angle metal shaft surface probe, 5 inch (12.7mm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8620147MP901-60Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8610505MP901-60B 
U8616269MP902-100FX-1-3MAbsolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 10 inches (25.4cm).
U8616270MP902-100FX-200K-1MRight angle flexible metal shaft surface probe, 10 inch (25.4cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620157MP902-40-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620160MP902-40FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8616199MP902-40FX-1-3MAbsolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (10.1cm).
U8620317MP902-45-1-3M 
U8620162MP902-45FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8610508MP902-50-200K-1M 
U8620164MP902-50BAbsolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.2 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 5 inches (127mm).
 
U8620165MP902-50B-1-3MRight angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620167MP902-60Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8620168MP902-60-1-3MSurface Probe, 1 MHz - 3 MHz, 2 MHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8620401MP902-60-200K-1MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620373MP902-60B-1-3MRight angle bent metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620170MP902-60FXAbsolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620426MP903-50-1-3MRight angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
 
U8620184MP905-120Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 12" (305mm).
U8620186MP905-30Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm).
U8616185MP905-30-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 3 inches (76mm).
U8610514MP905-30-200K-1MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range  and has a center frequency of 500kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm).
U8620188MP905-40Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620189MP905-40-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8610515MP905-40BAbsolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (102mm).
 
U8620193MP905-45-200K-1M 
U8620196MP905-50Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8620197MP905-50-1-3MAbsolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8610516MP905-50-200K-1M 
U8620198MP905-50BAbsolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inc (3.18mm) diameter tip. Total length of 5 inches (127mm).
 
U8610859MP905-50B-1-3MAbsolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 5 inches (12.7cm).
 
U8620199MP905-50FX 
U8620200MP905-60Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 0.125 in. (3.18mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8610518MP905-60-200K-1MSurface Probe, detachable metal right angle shaft, 200 kHz - 1 MHz frequency range, 500 kHz center frequency, 0.50 in. (12.7 mm) drop, 152 mm (6 in.) overall length, Mircodot Connector
U8620203MP905-60BAbsolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620337MP905-70Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 7" (178mm).
U8620209MP905-80Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 8" (203mm).
U8620427MP907-60Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.7 inch (17.7mm) drop at tip. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
 
U8620224MT-30-50KStraight metal shaft surface probe, 3 inch (7.6cm) overall length with 0.187 inch (4.7mm) diameter shaft. Operating frequency 50kHz,  triax Fischer/Lemo connector, bridge coil configuration.
 
U8623035MTF-30Surface Probe, Straight, 3" L. Shlded
U8623036MTF-30-1-6M2 MHz Surface Probe
U8623362MTF302-60 
U8623251MTF305-3030 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 3" (76.2mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz.
U8610529MTF305-4030 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 4" (101.5mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz.
U8623338MTF305-60Thirty degree angle metal shaft surface probe, 6 inch overall length with 0.5 inch drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623038MTF-40Surface Probe, 50 kHz to 500 kHz, Straight Probe, 101 mm (4in.) length, Triax Fischer/LEMO Connector
U8623039MTF-40-1-6MSurface Probe, 1 MHz - 6 MHz, 2 MHz, Straight Probe, 101 mm (4 in.) length, Triax Fischer/LEMO Connector
U8629752MTF-40FX-1-6M 
U8610530MTF453-30Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 3.0 inches.
U8623045MTF453-40Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 4.0 inches.
U8620274MTF455-30HFEC Surface Probe, 45 Deg .50 Drop Bridge 50-500KHZ Frequency
U8623050MTF455-40Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.50 inch drop and a total length of 4.0 inches.
U8623313MTF-50-1-6MStraight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
 
U8623060MTF-60-1-6MStraight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
 
U8623065MTF9002-70FXTriax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.02 inch drop and a total length of 7.0 inches.
U8250091MTF9003-50FXTriax Fischer/Lemo detachable Flexible metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.03 inch drop and a total length of 5.0 inches.
 
U8623070MTF9003-60Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft 0.03 in. (0.76 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8610773MTF9003-60-1-6MBridge Absolute shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 1MHz-6MHz frequency range. Right Angle Shaft, 0.03in. (0.76mm) drop with a 0.125" diameter tip. 6 inch overall length.
U8623071MTF9003-60FXRight angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.03 inch (0.76mm) drop at tip. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8610540MTF9010-50FX 
U8610711MTF901-50Right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz - 500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623074MTF901-60Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.10 inch drop and a total length of 6.0 inches.
U8623081MTF902-50Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 5.0 inches.
U8623083MTF902-60Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623084MTF902-60-1-6MSurface Probe, 1 MHz to 6 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623086MTF902-60BTriax Fischer/Lemo detachable "bent" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 6.0 inches.
U8623326MTF903-45-1-6M 
U8600960MTF903-50B-1-6MRight angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
 
U8623106MTF905-50Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 5.0 inches.
U8620272MTF905-50-1-6MRight angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
 
U8623108MTF905-60Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623113MTF905-60FXTriax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 6.0 inches.
U8610973MTF905-60FX-1-6M 
U8623263MTF905-60FX-200K-1M 
U8623131MXTF-40Absolute shielded metal shaft Triax Fischer/Lemo detachable pencil probe. Operates on a 50kHz - 500kHZ frequency range and has a center frequency of 200kHz. Straight shaft with 0.050 inch (12.7mm) diameter tip. Total length of 4 inches (10.2cm). 
U8623134MXTF902-40BTriax Fischer/Lemo detachable metal shaft "bent" pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.2 inch drop and a 0.050 inch diameter tip. Total length of 4.0 inches.
Q2500219MZTF-40 
U8623368MZTF905-60 Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.062 (1.57mm) diameter at tip. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge coil configuration. 
 
U8860784NDT1087-P1 
U8862446NDT3141G1 
U8630015NEC-1005 
U8680002NEC-1006Special Purpose Eddy Current Probe lap joint inspection
U8610552NEC-1016-1Special purpose right angle eddy current probe, bridge coil configuration operating with a frequency range of 25kHz-100kHz, triax Fischer/Lemo connector.
U8610556NEC-1058Surface Probe
U8633002NEC-1059Low Frequency Probe,
U8610403NEC-1062Special purpose right angle metal shaft surface probe, 8 inch (20.3cm) overall length with 0.25 inch (6.3mm) drop at tip. Operating frequency 25kHz -200kHz,  triax Fischer/LEMO connector, bridge coil configuration.
U8861313NEC-1062GMP Probe Guide L&R Side.
 
U8610558NEC-1083Special Purpose Eddy Current Probe
U8680003NEC-1084Special Purpose Eddy Current Probe
U8630018NEC-1087Special purpose right angle spot probe. 0.25 inch diameter (6.3mm), aluminum balanced reflection coil configuration, triax Fischer/LEMO connector.
 
U8610561NEC-1089Special Purpose Eddy Current Probe
U8633062NEC-1108Special purpose chem. mill sliding probe. Reflection coil configuration, triax Fischer/Lemo connector. Operating frequency range 1KHz-50KHz.

 
 
U8610744NEC-2017 
U8680089NEC-2052Special purpose eddy current surface probe, right angle metal shaft probe, 11 inches overall length with 0.05 inch drop at tip. Triax Fischer/ Lemo connector, bridge coil configuration with operating frequency of 50KHz-500KHz.
 
U8610570NEC-2078Special Purpose Probe, Equiv to 2-832-02-2455
U8629544NEC-2236-TF 
U8600304NEC-3006 
U8600305NEC-3007 
U8600079NEC-3014 
U8600080NEC-3015 
U8600081NEC-3016 
U8600307NEC-3035 
U8600309NEC-3036 
U8629069NEC-3039 
U8600083NEC-3078-.73-.79 
U8600328NEC-3129-48-56Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.750 Inch (19.05mm) to 0.875 (22.23mm).
U8600329NEC-3129-56-64Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.875 Inch (22.23mm) to 1.00 (25.40mm).
U8600330NEC-3129-EXTSpecial Purpose Eddy Current Probe
U8636056NEC-4028-2Ring probe, 0.5 inch (12.7mm) ID X 1.0 inch (25.4mm) OD. Reflection oil configuration, triax Fischer/LEMO connector.
U8636081NEC-4028-3 
U8630029NEC-4031Low frequency surface/spot probe, reflection coil configuration operating between 800Hz-30KHz, 4 pin Fischer connector.
U8634085NEC-4033-TFSpecial purpose eddy current spot probe. 0.62 inch (15.7mm) diameter X 1.6 inch (4.06cm) tall. Reflection coil configuration operating at 1-30kHz, right angle triax Fischer/LEMO connector.
U8636053NEC-4039Reflection Sliding Probe, Fixed, 1 kHz - 100 kHz, 25.4 mm (1.00 in.) x 38.1 mm (1.50 in.) x 20.3 mm (0.80 in.), Fischer/LEMO Triax Connector
U8633021NEC-4083Low Frequency Probe
U8630017NEC-4088-1Special Purpose Low Frequency Probe
U8639004NEC-4170Low Frequency Probe
U8670016NEC-8196 
U8670018NEC-8196L 
U8670135NEC-8196-TF 
U8779469OMNI-A-OBTCBond Testing C-Scan Adaption kit for OmniScan ECT/ECA includes MXB software and adaptor for Pitch-Catch BondMaster probe
U8767054RAU-RABolt hole probe adaptor, universal probe (4 pin Fischer) to Rechii RA probe (4 pin LEMO).
 
U8767055RAU-U-12FXFlex shaft scanner extension, universal probe (4 pin Fischer) to Spitfire or MiniMite Fischer scanner (4 pin Fischer). 12 inch (30.4cm) long.
U8634002RR0110-1-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.09  inch (27.6mm) OD
U8636011RR0110-5-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.00 inch (25.4mm) OD
U8636012RR0111-1-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.53 inch (13.4mm) ID X 1.10 inch (27.9mm) OD
U8636016RR0112-2Reflection Ring Probe, 2-pin microdot connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.25 inch (31.75mm) OD
U8636018RR0112-5-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.16  inch (29.46mm) OD
U8636026RR017-1-TF 
U8636027RR018-5-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.40 (10.16mm) ID X .80 inch (20.32mm) OD
U8636031RR019-5-TFReflection Ring Probe, triax fischer/lemo connector, operating frequency 80Hz-4KHz, 0.450 inch (11.43mm) ID X 0.900 inch (22.86mm) OD
U8629109RR026-1 
U8636039RR058-1Reflection Ring Probe, 2-pin microdot connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD
U8636040RR058-1-TFReflection Ring Probe, triax fischer/lemo connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD
U8636100RR2007-1 
Q6360011RR207-1 
U8630024RS1005-2-TFCorrosion Probe, TF Conn.
U8634026RS1005-5-TFLow Frequency Probe, triax fischer
U8634137RS204-2-TF Spot probe, 0.425 inch (10.8mm) diameter. Operating frequency 500Hz -15kHz, triax Fischer/Lemo connector, reflection coil configuration. 
 
U8270003SAA-112-005-032ECA Semi-Rigid probe, TX-RX mode, 112 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable.
U8270004SAAR-051-100-032ECA Rigid probe, TX-RX mode, 51.2 mm coverage, 20 - 500 kHz, 32 elements, 3-m cable.
U8270093SAB-064-030-032ECA Semi-Rigid probe for subsurface crack detection, TX-RX mode double resolution, 64 mm coverage, 4 kHz to 225 kHz, 32 elements, 2.4 m cable, with ENC1-K-ECA encoder mounted  
U8270006SAB-067-005-032ECA Semi-Rigid probe, TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable
U8270163SAB067-ENCECA Semi-Rigid probe, shielded TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3m cable. This is a factory-assembled probe kit, ready to use, consisting of a SAB-067-005-032, and ENC1-K-ECA encoder
U8270008SBB-051-150-032ECA Semi-Rigid probe, ABS mode, 51.2 mm coverage, 50 - 500 kHz, 32 elements, 3-m cable.
Q2500841SBBR026-ENC 
U8609344SEU-10.2-35 
U8609345SEU-10.3-35Universal Rotary Hole Probe 10.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609347SEU-11.0-35 
U8609350SEU-11.4-35Universal Rotary Hole Probe 11.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609353SEU-11.8-35 
U8609354SEU-11.9-35Universal Rotary Hole Probe 11.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609355SEU-12.3-35Universal Rotary Hole Probe 12.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602084SEU-12.6-35Universal Rotary Hole Probe 12.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.  
U8609356SEU-12.7-35Universal Rotary Hole Probe 12.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6090037SEU-13.5-50Universal Rotary Hole Probe 13.5mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609369SEU-13.9-35Universal Rotary Hole Probe 13.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602087SEU-14.2-35 
U8602090SEU-15.8-35 
U8609363SEU-15.9-35 
U8609372SEU-17.5-35 
U8609374SEU-18.3-35 
U8609376SEU-19.1-35 
U8609380SEU-20.6-35 
U8609392SEU-25.4-35 
U8602076SEU-3.0-35Universal Rotary Hole Probe 3.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609315SEU-3.1-35Universal Rotary Hole Probe 3.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6000004SEU-3.2-35 
U8609316SEU-3.5-35Universal Rotary Hole Probe 3.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8602077SEU-3.6-35Universal Rotary Hole Probe 3.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609317SEU-3.9-35Universal Rotary Hole Probe 3.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6020035SEU-4.0-35Universal Rotary Hole Probe 4.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8602078SEU-4.2-35Universal Rotary Hole Probe 4.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609318SEU-4.3-35Universal Rotary Hole Probe 4.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q2501117SEU-4.5-35 
U8609319SEU-4.7-35Universal Rotary Hole Probe 4.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609320SEU-5.0-35Universal Rotary Hole Probe 5.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8609321SEU-5.1-35Universal Rotary Hole Probe 5.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609322SEU-5.4-35Universal Rotary Hole Probe 5.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602079SEU-5.6-35 
U8609325SEU-5.9-35Universal Rotary Hole Probe 5.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602080SEU-6.0-35 
U8609326SEU-6.2-35Universal Rotary Hole Probe 6.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609327SEU-6.3-35Universal Rotary Hole Probe 6.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602081SEU-6.4-35Universal Rotary Hole Probe 6.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609328SEU-6.6-35Universal Rotary Hole Probe 6.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609329SEU-6.7-35Universal Rotary Hole Probe 6.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609330SEU-7.0-35Universal Rotary Hole Probe 7.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609331SEU-7.1-35Universal Rotary Hole Probe 7.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609333SEU-7.8-35Universal Rotary Hole Probe 7.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609334SEU-7.9-35Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
Q6090023SEU-7.9-51Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609335SEU-8.2-35Universal Rotary Hole Probe 8.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609336SEU-8.3-35Universal Rotary Hole Probe 8.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609337SEU-8.6-35 
U8602082SEU-9.0-35Universal Rotary Hole Probe 9.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8609340SEU-9.4-35Universal Rotary Hole Probe 9.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609341SEU-9.5-35Universal Rotary Hole Probe 9.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8609342SEU-9.8-35Universal Rotary Hole Probe 9.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8609343SEU-9.9-35Universal Rotary Hole Probe 9.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
 
U8250168SNG375-2.5L-10K-TFSpring loaded surface spot probe, 10 khz, Triax Fischer/LEMO connector - Bridge coil configuration.
 
U8634136SNG375-3L-25K-TFSpring loaded surface/spot probe, 25KHz, triax Fischer/Lemo connector.
 
U8629541SPO-4376LSPO-4376L Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, Straight, 8.3 mm ( 0.330 in.) Tip Diameter, Overall length 82.5 mm (3.25 in.), 7 Pin LEMO connector.
Q6020005SPO-5376Special purpose rotary scanner probe for flat bottom hole inspection. 0.250 inch (3.3mm) diameter, reflection differential coil configuration, 4 pin Fischer connector.
 
U8629963SPO-6464 
U8800538SPO-6687SPO-6687 Cable, reflection coil configuration probes with triax Fischer/Lemo connector to N600, N500, N1000 or N2000 instrument (16 pin LEMO), 6 ft
 
U8626147SPO-7118 
Q6000035SPO-7188 12.7 mmSPO-7188 12.7 mm probe only  
Q6400015SPO-7261 
Q2500346SPO-7264Special purpose wheel probe for Alcoa, GA88351M Rim Flange.
 
Q2500354SPO-7265Special purpose wheel probe for Alcoa, GA88651M, Catear.
 
U8600481SUB-10-12Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600482SUB-12-14Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.187 in. (4.76 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600483SUB-14-16Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.218 in. (5.56 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600484SUB-16-18Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.250 in. (6.35 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600485SUB-18-20Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.281 in. (7.14 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600486SUB-20-24Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.312 in. (7.94 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600487SUB-24-28Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.375 in. (9.52 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600488SUB-28-32Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.437 in. (11.11 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600490SUB-36-40Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.562 in. (14.29 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600491SUB-40-44Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.625 in. (15.88 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600494SUB-8-10Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.125 in. (3.18 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8670107SUBK-8-44 
Q2800630TEA-082-600-N20 
Q2800349TEA-100-015-N15 Bobbin Probe, Attached, 10 mm (0.394 in.), 3-30 kHz, 15 m (49.2 ft.) cable   
U8281753TEA-102-600-N20Bobbin Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable
Q2800317TEA-112-050-N30Bobbin Probe, Attached, 11.2 mm (0.441 in.), 10-100 kHz, 30 m (98.4 ft.) cable  
U8280768TEA-120-250-N15Bobbin Probe, Attached, 12 mm (0.472 in.), 50-500 kHz, 15 m (49.2 ft.) cable
U8281344TEA-124-050-N20Bobbin Probe, Attached, 12.4 mm (0.488 in.), 10-100 kHz, 20 m (65.6 ft.) cable
Q2800647TEA-130-015-N15 
U8280933TEA-136-050-N20Bobbin Probe, Attached, 13.6 mm (0.535 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8665001TEA-140-050-N15Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8280447TEA-140-050-N20Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8281740TEA-144-050-N15Bobbin Probe, Attached, 14.4 mm (0.567 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8282109TEA-148-015-N05Bobbin Probe, Attached, 14.8 mm (0.583 in.), 3-30 kHz, 5m cable  
Q2800318TEA-148-050-N30Bobbin Probe, Attached, 14.8 mm (0.583 in.), 10-100 kHz, 30 m (98.4 ft.) cable  
U8280625TEA-158-015-N20Bobbin Probe, Attached, 15.8 mm (0.622 in.), 3-30 kHz, 20 m (65.6 ft.) cable
U8281176TEA-158-100-N20Bobbin Probe, Attached, 15.8 mm (0.622 in.), 20-200 kHz, 20 m (65.6 ft.) cable
U8280820TEA-160-015-N15Bobbin Probe, Attached, 16 mm (0.63 in.), 3-30 kHz, 15 m (49.2 ft.) cable
U8282065TEA-164-250-N20Bobbin Probe, Attached, 16.4 mm (0.646 in.), 50-500 kHz, 20 m (65.6 ft.) cable  
U8281086TEA-170-050-N30Bobbin Probe, Attached, 17 mm (0.669 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8281064TEA-170-250-N20Bobbin Probe, Attached, 17 mm (0.669 in.), 50-500 kHz, 20 m (65.6 ft.) cable
Q2800596TEA-176-300-N15 
Q2800082TEA-182-015-N20Bobbin Probe, Attached, 18.2 mm (0.717 in.), 3-30 kHz, 20 m (65.6 ft.) cable  
  
  
U8281752TEA-184-050-N20Bobbin Probe, Attached, 18.4 mm (0.724 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8280651TEA-188-030-N15Bobbin Probe, Attached, 18.8 mm (0.74 in.), 6-60 kHz, 15 m (49.2 ft.) cable
U8280452TEA-188-050-N20Bobbin Probe, Attached, 18.8 mm (0.74 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8280223TEA-190-050-N15Bobbin Probe, Attached, 19 mm (0.748 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8281166TEA-194-050-N20Bobbin Probe, Attached, 19.4 mm (0.764 in.), 10-100 kHz, 20 m (65.6 ft.) cable
Q2800308TEA-198-015-N30Bobbin Probe, Attached, 19.8 mm (0.78 in.), 3-30 kHz, 30 m (98.4 ft.) cable  
Q2800321TEA-224-600-N30Bobbin Probe, Attached, 22.4 mm (0.882 in.), 120-1200 kHz, 30 m (98.4 ft.) cable  
U8280627TEA-228-600-N20Bobbin Probe, Attached, 22.8 mm (0.898 in.), 120-1200 kHz, 20 m (65.6 ft.) cable
U8281091TEA-230-050-N30Bobbin Probe, Attached, 23 mm (0.906 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8282059TEA-236-015-N20Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 20 m (65.6 ft.) cable  
Q2800319TEA-236-015-N30Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 30 m (98.4 ft.) cable  
U8280850TEA-304-050-N30Bobbin Probe, Attached, 30.4 mm (1.197 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8281555TEA-314-050-N20Bobbin Probe, Attached, 31.4 mm (1.236 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8281880TEA-328-015-N20Bobbin Probe, Attached, 40 mm (1.575 in.), 3-30 kHz, 20 m (65.6 ft.) cable  
Q2800548TEB-140-010Bobbin Probe, Detachable, 14 mm (0.551 in.), 2-20 kHz
U8280566TEB-140-050Bobbin Probe, Detachable, 14 mm (0.551 in.), 10-100 kHz
Q2800412TEB-166-050 Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 10-100 kHz   
Q2800413TEB-166-250 Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 50-500 kHz   
U8281703TEB-176-050Bobbin Probe, Detachable, 17.6 mm (0.693 in.), 10-100 kHz
U8281102TEB-188-030Bobbin Probe, Detachable, 18.8 mm (0.74 in.), 6-60 kHz
U8281934TED-162-015Air Conditioner Probe, Detachable, 16.2 mm (0.638 in.), 3-30 kHz  
Q2800111TEE-102-600-N20Titanium Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable  
Q2800640TEG-154-050-N25 
U8282061TEK-180-250-N20High Resolution Probe, Attached, 18 mm (0.709 in.), 50-500 kHz, 20 m (65.6 ft.) cable
Q2800667TEK-326-250-N20 
U8800531TEZ-ACS-N15Detachable cable for bobbin AC probes, 15 m (49.2 ft.)
U8800031TEZ-BBK-N15Kink-resistant detachable cable for bobbin ECT probes, 15 m (49.2 ft.)
U8800498TEZ-BBK-N20Kink-resistant detachable cable for bobbin ECT probes, 20 m (65.6 ft.)
U8779159TFTAPE-0.50Teflon Tape 1/2 in. Width
U8779160TFTAPE-0.75Teflon Tape  3/4 in. Width
U8779701TFTAPE-1.25Teflon Tape 1.25 inch (31.7mm) width X 18 yards (16.4M) long.
U8779077TFTAPE-2.00 
Q2800322TRX-220-300-N30RFT Dual Exciter Probe, 22 mm (0.866 in.), 300 Hz, 30 m (98.4 ft.) cable  
U8281505TXE-R8-138-MF-N20Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 13.8 mm (0.543 in.), Medium Frequency range, 20 m (65.6 ft.) cable
Q2800547TXE-R8-198-MF-N20Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 19.8 mm (0.78 in.), Medium Frequency range, 20 m (65.6 ft.) cable  
U8610876UMP902-60-200K-1MAbsolute unshielded metal shaft microdot detachable pencil probe. Operates on a 200K-1MHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20" (5.08mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. Total length of 6" (152mm).  
 
U8610608UMTF-40Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge unshielded coil configuration.
 
U8614274UMTF-40-1-6MStraight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge unshielded coil configuration.
 
U8250323UMTF453-45-200K-1MBridge Absolute un-shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 200kHz-1MHz frequency range. Forty Five degree Shaft, 0.30in. (7.6 mm) drop with a 0.125" diameter tip. 4.5 inch (11.4cm) overall length
U8623361UMTF901-50Unshielded right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz -500KHz, microdot connector, absolute coil configuration.
 
Q2500738UMTF9025-60FXRight angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.25 inch (6.3mm) drop. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, unshielded bridge coil configuration.
 
U8623143UMTF902-60-200K-1M500KHz center frequency Surface Probe
U8620232UP-30Surface Probe
U8620237UP-80FXSurface Probe
U8690018WLD-5-63Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 5.0 mm (0.196 in.) tip diamter, 6.1 mm (2.4 in.) length, 4-pin LEMO Connector
U8690046WLD-5-63-TFWLD-5-63-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100Khz-600 kHz, Straight, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 61.0 mm (2.4 in.), Triax Fischer/LEMO connector

61 mm
 
Q2500436WLD-5-63-TF-NFE 
U8690019WLD-8-55Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diamter, 5.5 mm (2.16 in.) length,  4-pin LEMO Connector
U8690022WLD90I-5-50 
U8629542WLD90I-5-50-TFWLD90I-5-50-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm (0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), Triax Fischer/LEMO connector.
上一篇: 爆炸焊复合钢板超声波相控阵检测 下一篇: Olympus奥林巴斯美国泛美超声波测厚/探伤探头传感器大全
提示

请选择您要拨打的电话: