FRT1000 机械诊断演示转子套件 Machinery Diagnostic Demonstration Rotor Kits

VALENIAN-FRT1000 转子套件是作为真实机器的小型工作示例开发的，可在真实情况下模拟振动信号。短（单临界）和长（双临界）转子套件均可供选择。可以安装各种传感器来提供振动信号。这些信号可用于培训振动分析师或维护人员对实际振动传感器系统或振动信号进行故障排除。

使用套筒式轴承的转子套件主要使用基于时间的分析技术进行研究，例如时间波形、轨道和轴位置绘图、相位和模态形状分析。使用可选的滚珠轴承，FFT 型仪器可用于研究轴承产生的频率。

使用转子套件可以获取和研究各种测量值：

- 基于频率的信号

- 基于时间的信号

- 轨道分析

- 平衡

- 跳动

- 转子弯曲

- 识别转子临界速度

- 轴相对信号

- 共振振幅因子

- 转子动态研究

- 相位信号

The VALENIAN-FRT1000 Rotor Kits were developed as a small working example of a real machine where vibration signals may be simulated under realistic circumstances. Both short (single critical) and long based (two criticals) rotor kits are available as an option. A variety of transducers may be installed to provide vibration signals. These signals may be used to train vibration analysts or maintenance personnel to troubleshoot actual vibration transducer systems or vibration signals.

The Rotor Kit using sleeve type bearings is primarily studied using Time Based analysis techniques such as time waveforms, orbits, and shaft position plotting, phase, and mode shape analysis. With the optional ball bearing, a FFT type instrument is useful to study the frequencies generated by the bearing.

A variety of measurements may be obtained and studied using the Rotor Kit:

- Frequency Based Signals

- Time Based Signals

- Orbital Analysis

- Balancing

- Runout

- Rotor Bow

- Identify Rotor Critical Speeds

- Shaft Relative Signals

- Resonance Amplitude Factor

- Rotor Dynamic Studies

- Phase Signals