安徽凯威环保设备有限公司
2010/11/28 22:18:33 通用橡套软电缆 Soft Rubber Sheath Cable for General Purpose |
本产品适用于交流额定电压450/750V及以下的家用电 器、电动工具和各种移动电气设备。 |
一、生产执行标准 JB8735.2-1998。 二、使用特性 1、额定电压:YZ型为300/500V、YC型为450/750V。 2、电缆允许工作温度应不超过65℃。 |
三、型号及名称及主要用途如表1 |
型 号 Type YZ、YZW |
YC、YCW |
YH |
YHF |
名 称 Description 中型橡套软电缆 General type rubber sheath soft cable 重型橡套软电缆 Heavy type rubber sheath soft cable 天然胶电焊机电缆 Crude rubber electric welding machine cable 氯丁胶电焊机电缆 neoprene electric welding machine cable |
It is used for household electrical appliance, electrical tools and various electrical equipments of AC rated voltage 450/750V or lower. Executive standard: JB8735.2-1998 Working Condition 1: Rated voltage 300/500V for YZ type and 450/750V for YC type 2: Working temperature allowed by cable is no higher than 65℃. Type, Description and Main Application in Table 1 Table 1 主要用途 Main application 用于各种移动电器设备和工具 For various electric devices and tools 用于各种移动电器设备,能承受较大的机械外力作用For various electric devices and tools. It could bear strong mechanical force from outside |
主要用作电焊机焊接线用 It is used as jointing line of electric welding machine |
四、规格范围如表2 |
Specification Range in Table 2 |
Table 2 标称截面mm 2 Nominal cross section area 0.75~ 6 1.5~240 1~95 1~150 1.5~25 16~95 |
型 号 Type YZ、YZW |
额定电压V Rated voltage 300/500 |
YC、YCW |
450/750 |
YH、YHF |
- - |
芯 数 Core number 2,3,4,5 1 2 3,4 5 1 |
五、规格尺寸及技术参数如下表 |
标称截面mm 2 Nominal cross section area |
导体结构 Conductor structure 根 /单线直径 |
20℃导体电阻£Ω/ km Conductor |
Specification, Size and Technical Parameter in Table 3 Table 3 YZ、YZW 300/500V 电缆外径参考 Cable OD for reference |
2芯 cores |
3芯 cores |
4芯 cores |
5芯 cores |
6芯 cores |
Pieces/diameter of single resistance at 20 |
piece |
℃ |
78 |
|
0.75 1.0 1.5 2.5 4 6 |
24/0.20 32/0.20 30/0.25 49/0.25 81/0.25 122/0.25 |
26.0 19.5 13.3 7.98 4.95 3.30 |
8.2 8.8 10.5 12.5 14.0 17.0 |
8.8 9.2 11.0 13.0 14.5 18.0 |
9.6 10.0 12.5 14.0 16.5 20.0 |
11.0 11.5 13.5 15.5 18.0 22.5 |
- - 12.0 14.0 16.0 19.5 |
Table 4 YC、YCW 450/750V 电缆外径参考值(mm) Cable OD for reference |
标称截面 mm 2 Nominal cross section area 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 |
导体结构 Conductor structure 根 /单线 直径mm Pieces/ diameter of single piece 30/0.25 49/0.25 81/0.25 122/0.25 77/0.41 119/0.41 189/0.41 265/0.41 379/0.41 530/0.41 437/0.52 551/0.52 696/0.52 851/0.52 1073/0.52 |
20℃导体电 阻£Ω/km Conductor resistance at 20℃ 13.3 7.98 4.95 3.30 1.91 1.21 0.780 0.554 0.368 0.272 0.206 0.161 0.129 0.106 0.0801 |
1芯 core |
2芯 cores |
3芯 cores |
4芯 cores |
5芯 cores |
3+1芯 core |
7.2 8.0 9.0 11.0 13.0 14.5 16.5 18.5 21.0 24.0 26.0 28.5 32.0 34.5 38.0 |
11.5 13.5 15.0 18.5 24.0 27.5 31.5 35.5 41.0 46.0 50.5 - - - - |
12.5 14.5 16.0 20.0 25.5 29.5 34.0 38.0 43.5 49.5 54.0 59.0 66.5 - - |
15.5 16.5 18.0 22.0 28.0 32.0 37.5 42.0 48.5 55.0 60.5 65.5 74.0 - - |
15.0 17.0 19.5 24.5 31.0 35.5 41.5 - - - - - - - - |
- 15.5 17.5 21.0 26.5 30.5 35.5 38.5 46.0 51.0 55.0 59.0 66.0 - - |
Table 5 YH、YHF |
标称截面mm 2 Nominal cross section area 16 25 35 50 70 95 |
导体结构 Conductor structure 根 /单线直径Pieces/ diameter of single piece 509/0.20 796/0.20 1115/0.20 1592/0.20 2229/0.20 3025/0.20 |
20℃导体电阻£Ω/km Conductor resistance at 20℃ |
不镀锡 non tinned 1.16 0.758 0.536 0.379 0.268 0.198 |
镀锡 tinned 1.19 0.780 0.552 0.390 0.276 0.204 |
电缆外径参考 mm Cable OD for reference 11.5 13.0 14.5 17.0 19.5 22.0 |
六、交货要求 1、根据双方协议允许任何长度的电缆交货,长度误差为 ±0.5%。 2、用户对产品有阻燃特性要求,在合同中需另补充协议。 |
Delivery Length 1: Delivery length of cable depends on both agree- ments with length error allowance of ±0.5% 2: The additional agreement should be added ac- cording to customer's requirements on flame retardant performance. |
79 |