ASTM D2803 - 09(2015)

本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需ASTM D2803 - 09(2015)标准详细信息或ASTM D2803 - 09(2015)具体测试方法，可与我们技术人员联系或给我们留言，我们将为您提供相关的技术支持。

金属有机涂层耐丝状锈蚀的试验用标准指南是关于《金属有机涂层耐丝状锈蚀的试验用标准指南》，*新标准版本复审于2015年。

ASTM D2803 - 09(2015)英文简介

1. Scope

1.1 This guide covers three procedures for determining the susceptibility of organic-coated metal substrates to formation of filiform corrosion.

1.2 This guide is limited to the determination of whether filiform corrosion will occur between the organic coating and substrate.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1: Procedure B of this standard is equivalent to ISO 4623.

2. Referenced Documents

ASTM Standards

B117 Practice for Operating Salt Spray (Fog) Apparatus

D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D823 Practices for Producing Films of niform Thickness of Paint, Varnish, and Related Products on Test Panels

D1005 Test Method for Measurement of Dry-Film Thickness of Organic Coatings sing Micrometers

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

D7091 Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

E104 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

International Standard

ISO 4623–1 Paints and Varnishes--Determination of resistance to filiform corrosion-Part 1: On steel

ISO 4623–2 Paints and Varnishes--Determination of resistance to filiform corrosion-Part 2: On aluminum

ISO 4628–10 Paints and Varnishes--Evaluation of degradation of coatings--Designation of quantity and size of defects and of intensity of changes-Part 10: Assessment of filiform corrosion