VW PV3907 纺织品刷磨耗试验

PV3907 纺织品刷磨耗试验

1范围：该测试规范描述了用于测试样品和系列监测测试的纺织品的刷磨损的程序。

2要求：根据图纸和/或TL标准

  测试过程

测试仪器：旋转磨机（Frank）

样品尺寸：100cm²

磨损区域：约50cm²

样品曲率：10mm

负载：10N

转数：1000

刷毛高度：16.4mm

刷毛厚度：0.4mm

每束刷毛：48±2

把柄：90x120mm

捆绑间距：8mm

刷毛材料：PA6

行：11

在每1000次旋转之后，刷子应使用压缩空气清洁杂质。

3.1刷子的供应来源

Kullen  Gmbh&Co

Am Heibrunnen83

72766 Reutlingen

Telephone +49 (0)7121 142-0

F +49 (0)7121 142-260

ABRASION TESTER (Design SCHOPPER)

This apparatus evaluates and measures resistance to wear and tear on varieties of textile materials

(woven and knitted fabrics, etc.) according to DIN 53863, Part 2, GME Standard 60345, GMW Standard 3283 and

VW/Audi Zentral-Norm PV 3908.

The ABRASION TESTER described as follows guarantees a testing method that gives the possibility of determining reliably the resistance to wear and tear. This method consists in that the different sectors of a circular sample of the material to be tested, are successively and intermittently, put into contact with and moved across a loaded abrading face, whereby the sample surface is worn by the abrader. The rotary

movement of the test specimen is arranged at definite intervals, so that the sample is tested in two directions.

The clamping head allows of clamping reliably even very thick samples and moreover is so arranged that, by using under similar initial tension. This is of essential importance as the test result depends upon the stretch of the sample. For fixing the sample the clamping head can be taken off the machine and inserted into a special ringspanner which facilitates this operation. The abrader head is balanced by a counterweight. The compression effect for the abrading operation is produced by placing loading weights on the abrader head. Siliciumcarbid-emery paper has proved to be a very convenient abrasive. For fastening, the strip of emery paper is used for

each test in order that the testing conditions may be uniform.