计量仪器仪表中英文对照表

 计量仪器仪表中英文对照表

61齿轮渐开线样板the involute master of gear

62齿轮螺旋线样板the helix master of gear

63矩形花键量规gauges for straight–sided splines

64测量蜗杆master worm

65测齿仪universal gear measuring instrument

66渐开线检查仪universal involute measuring instrument

67齿轮齿距测量仪gear circular pictchmeasuring instrument

68齿轮测量机Universal gear measuring machine

69齿轮螺旋线测量仪gear helix measuring instrument

70便携式齿轮齿距测量仪manual gear circular pitch measuring instrument

71便携式齿轮基节测量仪manual gear base pitch measuring instrument

72立式滚刀测量仪vertical hob measuring instrument

73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument

74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument

75梯形螺纹量规gauges for metric trapezoidal screw threads

76工作螺纹量规work gauges for metric trapezoidal screw threads

77校对螺纹量规check gauges for metric trapezoidal screw threads

78.梯形螺纹量规型式与尺寸Types and dimensions of metric trapezoidal screw threads

79.普通螺纹量规型式与尺寸Types and dimensions of gauges purpose screw threads

80.非螺纹密封的管螺纹量规Gauges for pipe threads prcessure-tight joints are not made on the threads

81.螺纹千分尺Screw thread micrometer

82.zui大允许误差maximum permissible error

83.间隙螺纹量规Clearance screw gauge

84.量针Bar gauge

85.螺纹样板Screw thread template

86.用螺纹密封的管螺纹量规Gauges for pipe threads where pressure-tight joints are made on the threads

87.刀具预调测量仪精度Accuracy of the presetting instrument

88.薄膜式气动量仪Membrane type pneumatic measuring instrument

89.光栅线位移测量系统Grating linear displacement measuring system

90.光栅角位移测量系统Grating angular displacement measuring system

91.磁栅线位移测量系统Magnet-grid linear displacement measuring system

92.量块附件Accessories for gauge blocks

93.V形架Vee blocks

94.比较仪座Comparator stand

95.磁性表座Magnetic stand

96.表座Universal stand for dial indicator

1.刀口型直尺:knife straigjht edge

2.刀口尺: knife straigjht edge

3.三棱尺three edges straigjht edge

4.四棱尺four edges straigjht edge

5.条式和框式水平仪bar form and square levels

6.合像水平仪imaging level meter

7铸铁平板cast iron surface plate

8.岩石平板granite surface plate

9.铸铁平尺cast iron straigjht edge

10.钢平尺和岩石平尺steel and granite straigjht edge

11.圆度仪roundness measuring instrument

12.电子水平仪electronic level meter

13.表面粗糙度比较样块铸造表面roughness comparison specimens cast surface

14.表面粗糙度比较样块磨、车、铣、插及刨加工表面roughness comparison specimens-groundturnedboredmilledshape and planed

15.表面粗糙度比较样块电火花加工表面roughness comparison specimens spark-erostion machining surfaces

16.表面粗糙度比较样块抛光加工表面roughness comparison specimens pollshed surfaces

17.接触式仪器的标称特性

18.轮廓profiles

19.轨迹轮廓traced profile

20.基准轮廓reference profile

21.总轮廓total profile

22.原始轮廓primary profile

23.残余轮廓residual profile

24.触针式仪器stylus instrument

25.感应位移数字存储触针式量仪displacement sensitivedigitally storing stylus instrument

26.触针式仪器的部件stylus instrument components

27.测量环measurement loop

28.导向基准renfence guide

29.驱动器drive unit

30.测头（传感器） probe（pick-up）

31.拾取单元tracing element

32.针尖stylus tip

33.转换器transducer

34.放大器amplifier

35.模/数转换器analog-to-digital converter

36.数据输入data input

37.数据输出data output

38.轮廓滤波和评定profile filtering and evaluation

39.轮廓记录器profile recorder

40.仪器的计量特性metrological characteristics of the instrument

41.静测力的变化change of static measuring force

42.静态测力static measuring force

43.动态测量力dynamic measuring force

44.滞后hysteresis

45.测头的测量范围transmission function for the sine waves

46.仪器的测量范围measuring range of the instrument

47.模数转换器的量化步距quantization step of the ADC

48.仪器分辨力instrument resolution

49.量程分辨力比range-to-resolution ratio

50.测头线性偏差probe linearity deviation

51.短波传输界限short-wave transmission limitation

52.轮廓垂直成分传输vertical profile component transmission1

53表面粗糙度比较样块抛丸、喷砂加工表面roughness comparison specimens shot blasted and blasted surfaces

54产品结构几何量计术规范（GPS）geometrical product specifications（GPS）

55表面结构surface texture

56接触式仪器的标称特性nominal characteristics of contact instruments

57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth

58zui大允许误差maximum permissible error

59圆柱直齿渐开线花键量规gauges for straight cylindrical involute splines

60齿厚游标卡尺Gear tooth vernier calipers