南京炯雷仪器设备有限公司
2016/6/4 10:01:13
1. product name : Combustion Tester Of Automotive Interior
2. Product number:QCS-3
3. Introduction: It is used for qualitative assessment of the fuel of automotive interior materials and applies to all types of automotive interior materials.
4. Working conditions:
① Ambient temperature:-5℃-30 ℃
② Relative humidity:≤ 85%
③ power supply:220V+ 10%
④ Power:100W
⑤ Gas source:Liquefied petroleum gas
⑥ Stopwatch accuracy : not less than 0.5s
⑦ The time of the flame of a burner to the test specimen:15s
⑧ Burner:Internal Diameter:9.5mm+ 0.1mm,Length : 100mm
⑨ Test Angle:The lamp is 90 degrees vertical to the horizontal placed in the sample combustion
⑩ Flame height: 20mm + 2mm to 100mm + 2mm adjustable (generally adjustable to 38mm)
11 Applying the flame time: 0-999.9s + 0.1s can be adjusted (generally selected as 15s)
12 Burning time: 0-999.9s + 0.1s, observe the flame to the first line after the manual start, manual pause
13 Temperature range:0 ~ 200, display real-time test temperature(Display test conditions within the studio internal temperature, can be customized environmental temperature control, higher than 34 degrees can not be started)
5. Composition:
① Equipment control part and the hood is together,combustion chamber is built。
② Ignition system:Pressure automatic
③ Automatic intake and exhaust system (gas automatically open, automatically shut down)
④ Have ventilation and lighting
⑤ U-bracket: stainless steel
⑥ Heat-resistant metal wire groove :spacing 25mm ,size 0.5mmX0.5mm
⑦ Temperature measurement range:0-200℃
⑧ Flame Ruler Accuracy: 0.1mm
⑨ Equipment Dimensions: L * W * H 1310 * 650 * 1560mm (including feet)
⑩ Combustion test area volume:> 0.75 cubic meters long * width * height of about 1050mm × 640mm × 1300mm, black background, the background illumination ≤20Lux
6. Design standard:
GB8410-2006《Flammability of automotive interior materials》
FMVSS 571.302
TL1010
DIN7520
相关产品:QCS-3型汽车内饰材料燃烧试验仪