- 面议
起订量：
GYSE-A SANTEST-GYSE-A线性位移传感器SANTEST
- 型号
- GYSE-A
该企业相似产品
上海航欧机电设备有限公司专业从事进口机电设备、仪器仪表等疑难备品备件的销售，是经营世界各地进口设备机电配件的现代化企业。
上海航欧公司与众多电子元件供应商建立有极其良好的合作关系，在欧美、日本等地形成了稳定、高效的供应网络，专业的询价渠道和多年的行业经验，更使我们在价格及货期上有很大优势。
经销产品供应的行业涉及冶金、钢铁、石化、能源、航天、集装箱码头、汽车、水利、造纸、电厂、纺织、注塑、橡胶、医疗、食品包装等。
我们热忱地希望尽我们较大的努力，力争*惠的产品价格，供货周期以及服务质量，能够为您解决进口备件方面的问题。
优势进口产品主要有：传感器，测速电机，接近开关，电子尺，编码器，控制器、分析仪，光纤，光栅，插装阀，报警灯，电缆，拖链，分配器，马达，减速机，继电器、缓冲器和进口五金等。
详细信息
SANTEST-GYSE-A Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd.GYSE-A线性位移传感器GYSE-A是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~3000mm，高精度，高品质，
The GYSE-probe is an all-in-one type sensor with positional
resolution up to 1μm.
Positon output is Analogue, SSI, or Incremental.
Velocity output (option) is avaiable for Analogue type.
The positonal difference between 2 magnets can be observable
as well.
This allows quick and easy sensor cartrige replacement.
Sensor parameters (zero, full-scale or range) can be adjusted by
using the Windows programming software (ISO9141).
Specifications
Non-linearity
< ±0.025%FS (Min.±50μm)
Resolution
16bit (1/65536)
Repeatability
±0.001%FS (Min.±3μm)
Temp drift
±20ppmFS/°C
Output
Analogue
Position output (Standard)
0-10V
(output current:Max.5mA, load:Min.2kΩ)
Or 4-20mA (load:Min.500Ω)
Velocity output (Option)
±10V or 4-20mA / Resolution:16bit (1/65536)
Alarm output
Open drain 50V 0.1A (Alarm signal for lost magnet)
Power supply
+24 (±2) VDC (80mA)
Frequency response
Std 1kHz (depending on stroke) sampling
Admissible press.
35MPa (probe rod)
Operating Temp
-20°C-+80°C
Storage Temp
-40°C-+80°C
Vibration
15G (10-2000Hz)
Shock
100G (2msec)
Protection
IP67 (Connecting mount or Pigtail type)
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Model No.
(1):Effective stroke
15mm-5200mm
(2):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF-3A
(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14Φ13.8
(4)Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
For CN type, only counter connector supplied.
In case extra cable needed, specify the length.
(5):Analogue position output (OUT1)
AD
0-10V (Standard)
AR
10-0V
BD
4-20mA
BR
20-4mA
CD or CR□□
bipolar output
[ex]
CD10
CR05
□□V-□□V
-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5
Custom order
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38
Custom order
5.12-20mA
20-5.38mA
*Z=Zero positon
*F=Full scale position
(6):Option:Analogue output (OUT2)
Position:see (5)
Velocity output (Note)
VA[ ] ±10V
WB[ ] 4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity＝9.99mm/sec)
N:No option
(Note)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.
Dimensions
Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2Y.
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, Option:L type)
