- 面议
起订量：
GYKM-LT_GYKM-LS SANTEST_GYKM-LT位移传感器_GYKM-LS位移传感器
- 型号
- GYKM-LT_GYKM-LS
该企业相似产品
上海航欧机电设备有限公司专业从事进口机电设备、仪器仪表等疑难备品备件的销售，是经营世界各地进口设备机电配件的现代化企业。
上海航欧公司与众多电子元件供应商建立有极其良好的合作关系，在欧美、日本等地形成了稳定、高效的供应网络，专业的询价渠道和多年的行业经验，更使我们在价格及货期上有很大优势。
经销产品供应的行业涉及冶金、钢铁、石化、能源、航天、集装箱码头、汽车、水利、造纸、电厂、纺织、注塑、橡胶、医疗、食品包装等。
我们热忱地希望尽我们较大的努力，力争*惠的产品价格，供货周期以及服务质量，能够为您解决进口备件方面的问题。
优势进口产品主要有：传感器，测速电机，接近开关，电子尺，编码器，控制器、分析仪，光纤，光栅，插装阀，报警灯，电缆，拖链，分配器，马达，减速机，继电器、缓冲器和进口五金等。
详细信息
SANTEST_GYKM-LT位移传感器_GYKM-LS位移传感器SANTEST_GYKM-LT-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYLT/GYLS是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~3500mm，高精度，高品质，： SANTEST_GYKM-LT_GYKM-LS Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
|
Specifications
Non-linearity | < ±0.025%FS TYP |
Resolution | < 0.01%FS |
Repeatability | < ±0.01%FS |
Temp drift | < 40ppm FS/°C |
Voltage output | Model:GYLS 0-10V or 10-0V / (output current:Max.5mA, load:Min.2kΩ) |
Current output | Model:GYLT 4-20mA or 20-4mA / (load:Min.500Ω) |
Power Supply | +24 (±2) VDC (50mA) |
Frequency response | Std 1kHz (depending on stroke) sampling |
Admissible press. | 35MPa (probe rod) |
Operating Temp | -20°C-+80°C |
Storage Temp | -40°C-+80°C |
Vibration | 6G (or 40Hz 2mmPP) |
Shock | 50G (2msec) |
Protection | IP67 (10kPa, 30min) |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Model No.
(1):Effective stroke
15mm-3500mm
(2):Direction of output
(toward probe tip)
D:output data increase
R:output data decrease
(3):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF
(4):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8
(5):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
Connector:straight or angle type
Connector:only counter connector is supplied. In case cable needed,
specify cable length.
Dimensions
|
|
Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
The length of the cable should be less than 10m in case of using the voltage output type
and 100m in case of using the current output type.
Connector:Omron XS2C-D4S1 (straight type) or D4S2 (L type) (Material:PBT plastic)
Applied cable diameter:Φ5-Φ6
Wire size:0.18-0.75mm2
Connection
1 DC24V
2 0V
3 Output (Current or Voltage)
4 COM
*Shield should be connected with 0V
at user side.
*0V and COM are connected in the head.
