起订量:
PDPP2T-TT-OD Ossila材料DPP-DTT 1260685-66-2 (1444870
中级会员第8年
代理商 深圳市泽拓生物科技有限公司专业服务于高校、研究院、中科院,主要从事欧美先进的生命科学实验产品在中国市场的推广,包括药理实验设备,毒理实验设备,动物行为测试设备,生理实验设备,心理实验设备,运动科学,基因工程,动物学等学科的实验设备,FST医疗工具,且代理了国内高纯有机试剂、无机、生化试剂、分析试剂、金属有机催化剂、以及实验室仪器、耗材试剂、鲎试剂及配套产品以及医疗工具。
我司代理的主要品牌有:
1. 加拿大1-material
2. FST动物器械
3. Rubis镊子
4. ideal-tek镊子
5. 美国EMS
6. Dumont镊子
7. 美国Polyera
8. Erem镊子
9. spiel镊子
10. 美国IDEAL
11. 法国FACOM
12. 德国Weller
13. 德国Wiha
14. 美国Germnator
15. 美国Entegris氟塑料
16. 英国GilderGrids电镜耗材
17. 苏州66VT眼科器械
18. 上海金钟器械
19. 铜网
20. 聚四氟乙烯产品
21. 骨科器械
22. 美国WPI
我们拥有充满活力的高素质人员,具有丰富知识的技术人员和技术全面、经验丰富的售后服务人员,在推广先进质优的仪器设备的同时,为用户提供优质的售前售后服务。
只用于动物实验研究等
A high-purity, high molecular-weight polymer based on a backbone of diketopyrrolo-pyrrole-dithiophene-thienothiophene (DPP-DTT) for use in high-mobility air-stable OFETs[1,2], high-efficiency OPVs, and as a p-type interface layer for perovskite solar cells.
DPP-DTT (also referred to as PDPP2T-TT-OD) is now available featuring:
Batch | Quantity | |
M315 | 100 mg | |
M315 | 250 mg | |
M315 | 500 mg | |
M315 | 1 g | |
M315 | 5 g / 10 g* |
*For 5 - 10 grams order quantity, the lead time is 4-6 weeks.
Batch | Mw | Mn | PDI | Stock info |
M314 | 292,200 | 74,900 | 3.90 | Out of Stock |
M315 | 278,781 | 76,323 | 3.65 | In stock |
CAS number | 1260685-66-2 (1444870-74-9) |
Chemical formula | (C60H88N2O2S4)n |
HOMO / LUMO | HOMO = -5.2 eV, LUMO = -3.5 eV [2] |
Synonyms |
|
Solubility | Chloroform, chlorobenzene and dichlorobenzene |
Classification / Family | Bithiophene, Thienothiophene, Organic semiconducting materials, Low band-gap polymers, Organic photovoltaics, Polymer solar cells, OFETs |
PDPP2T-TT-OD Ossila材料DPP-DTT 1260685-66-2 (1444870-74-9)
Chemical structure of DPP-DTT, CAS No. 1260685-66-2.
PDPP2T-TT-OD Ossila材料DPP-DTT 1260685-66-2 (1444870-74-9)
The exceptional high mobility of this polymer of up to 10 cm2/Vs [2] via solution-processed techniques, combined with its intrinsic air stability (even during annealing) has made PDPP2T-TT-OD of significant interest for OFET and sensing purposes.
While the highest mobilities require exceptional molecular weights of around 500 kD (and with commensurate solubility issues), high mobilities in the region of 1-3 cm2/Vs can still be achieved with good solution-processing at around 250 kD. As such, we have made a range of molecular weights available to allow for different processing techniques.
In our own tests, we have found that by using simple spin-coating onto an OTS-treated silicon substrate (using our prefabricated test chips), high mobilities comparable to the literature can be achieved (1-3 cm2/Vs). Further improvements may also be possible with more advanced strain-inducing deposition techniques.
Example OFET characteristics for DPP-DTT (M313) solution processed from chlorobenzene on a 300 nm SiO2 substrate treated with OTS. Output characteristic (top left), transfer curves (top right), mobility fitting (bottom left) and calculated mobility (bottom right).
Although shown as a promising hole-mobility polymer for OFETs, when used as the donor material in a bulk heterojunction photovoltaic (with PC70BM as the acceptor), initial efficiencies of 1.6% were achieved for DPP-DTT [3]. The low device metrics were attributed to poor film morphology. However, a higher efficiency of 6.9% was achieved by using thicker film (220 nm) [4].
PDPP2T-TT-OD has also recently been used successfully as an active-layer dopant material in PTB7-based devices [5]. An improvement in device performance was observed, with average efficiencies increasing from 7.6% to 8.3% when the dopant concentration of DPP-DTT was 1 wt%. The use of DPP-DTT as a high-mobility hole-interface layer for perovskite hybrid devices has also been investigated [6].
DPP-DTT synthesis: DPP-DTT was synthesised by following the procedures described in [2] and [3] (please refer to the following references):
With 2-thiophenecarbonitrile and dimethyl succinate as starting materials in t-amyl alcohol, it gave 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione. Alkylation of 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione with 2-octyldodecylbromide in dimethylformamide afforded 3,6-bis(thiophen-2-yl)-2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione. Further bromination gave3,6-bis(5-bromothiophen-2-yl)-2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (M1).
Further reaction of M1 with 2,5-bis(trimethylstannyl)thieno[3,2-b]thiophene (M2) under Stille coupling conditions gave the target polymer DPP-DTT, which was further purified via Soxhlet extraction with methanol, hexane and then chloroform.
References: