中英文可选择 ChineseEnglish are available
全流路自动泄漏测试 Leak Test
使分析质量更为可靠。如图所示，用户选定泄漏测试，仪器将进入全流路泄漏测试（包括样品瓶在内的），zui大限度地保证仪器可靠性。
This function will help user to complete the whole carrier gas system test with a vialget a high reliability.
动态和静态任意选择
采用单针双流路及气路选择技术，能很方便实现动态和静态顶空功能。防止样品高温氧化功能。提供一种样品反映动力学研究手段，对于一些特殊样品，Purge模式为用户提供了样品处理前顶空瓶内空气置换，避免了样品的变性，影响分析质量。
The Double holes in needlegas selecting provide dynamicstatic headspace methods. Employed the technique prevent from sample decomposition or oxidization. Employing the Purge mode, can sweep the air in vials with carrier gas. The mode is useful in kinetic studies.
高的样品输出特性High Sample Throughput
可存储10个方法 
几乎任何样品中的挥发性化合物都能简单、快速地用顶空气相色谱分析，顶空进样技术提供了对液相和固体样品的无溶剂萃取，从而节约了时间并消除了其它样品制备方法中可能出现的错误，如吸附和萃取。
Volatile compounds in almost any sample matrix can
be analyzed simplyquickly by headspace gas chromatography. Headspace sampling provides a method that extract sample of liquidsolid with a solvent-freeminimizes rework by eliminating many of the tediouserror-producing . The system compley rely on volatilization to separate the compounds from the sample matrix, so sample extraction, clean uppreconcentration are not necessary.
恒定模式和吹扫模式（ConstantPurge Mode）
AutoHS提供了*的样品输出能力，40个样品位的样品盘和15个样品位的加热炉，对许多应用都可以进行无人干预操作。在Purge模式下，可以一次性上装13个瓶进入炉内，进行气体置换。恒定模式（Constant Mode）使用优化的样品重叠模式，顶空的汽化平衡是在恒温条件下获得的，恒温器可以同时容纳12个样品瓶，以确保在上一个样品被分析完之前，准备好下一个样品的分析。这一过程，大大节约了由于分析下一个样品所需加热恒温平衡时间，也使样品的重复性得到保证。提供样品流路的同时，样品输出采用去活性衬管连接，消除了样品间的污染。
AutoHS provides high sample throughput. Equipped with a 40-sample tray15 positions in the heating oven allowing unattended overnight operation for many applications. It can load 13 vials to be purged in the Purge Mode. In Constant Mode , automated constant heating time is employed with optimized sample overlapping for maximum sample throughput in the minimum amount of time. It can simultaneously thermostat up to 12 samples, ensuring that the next sample is always ready for analysis upon completion of the previous run. This adds up to a significant time savings since there is no need to wait for the next sample to heatget best reproducibility. A deactivated sampling path, from switch valve to transfer line, is standard on the AutoHS. The clean gas swept the sample path.
温度渐进模式（Progressive Mode）
温度渐进模式以一个较短的时间基数，对同等量含同样组份的一系列样品恒温平衡时间以等差级数递增，得到一组色谱数据，同一组分，当它在顶空达到平衡后，它的分压是不随时间变化的，平衡后所得到的色谱峰面积也就zui高。从而获得一个的平衡时间。在这个模式运行过程中，仪器将自动选择zui短的运行时间，即能从单个样品恒温平衡到多个样品恒温平衡的自动转换。
In the Progressive Mode, the vials are thermostatted for an increasing time, representing a multiple of the first thermostatting time. It is used in the determination of the necessary equilibration time, where a number of vials containing the same sample are to be thermostated for increasing periods. Automatically optimized samples.
多次顶空模式（MHE mode）
对于同一样品瓶的多次顶空提取，得到多个样品色谱图，用于方法的开发和对特种样品的分析。
The technique requires multiple extractions from the sample vial. This is very useful for developing methodrunning special sample.
仪器接口 Input/Output Port
与各种气相色谱仪连接，提供各种气路样品传输接口，电路输入/输出接口采用标准的信号接口，外部准备，启动、停止，准备输出， 运行输出等。
Provided ports to connect with any gas chromatograph with a standard interface. They includes: Ready In, Start In, Stop In, Ready OutRun Out.
自动顶空进样相对于其它气相色谱样品处理技术来讲，它消除了复杂的容易产生 
