品牌
代理商厂商性质
深圳市所在地
美国鸟牌BIRD sh-42s频谱分析仪
Introduction技术简介
SignalHawk SH-42S is a new generation Handheld Spectrum Analyzer and meets the needs of portbality. SignalHawk SH-42S has light weight,small size and is easy to carry.SignalHawk SH-42S has highly capability in sensitivity.The excellent performance can meet most RF signals measurement &test requirements.With Android operation system and high-resolution touch screen,Making measurement &test more easier and convenient.
signalhawk sh-42s是新一代手持式频谱分析仪和满足需求的仪表。signalhawk sh-42s具有重量轻、体积小、易于携带。signalhawk sh-42s具有灵敏度高，优异的性能，能够满足大多数射频信号的测量和测试要求，采用Android操作系统和高分辨率触摸屏，使测量和测试更加容易和方便。
SignalHawk Highlights特点
•平均噪声电平：-168 dBm @1GHz（灵敏度设置为高,分辨率带宽统一为 1Hz）
•分辨率带宽（RBW）：10Hz~5MHz
•相位噪声：-98dBc/Hz 10kHz offset @1GHz
•标记：8zui大支持 1参考 7三角标记
•跟踪：3 Trace，Clear/Write,Maxhold,Minhold,Average,View,Hide
多屏：4 Maximum
Capabilities and Functional Highlights性能和功能特点
•测量信道功率，占用带宽，相邻信道功率比，相位噪声，N dB带宽
•内部前置放大器标准
•安卓操作系统
•全触摸屏，支持多点触控操作
•重量轻，体积小
•电池寿命长，电池运行时间6小时
Specifications规格
Fuction功能 | ||||
Measurement 测量 | ACPR,CH Power,OBW,N dB Down,Phase Noise ACPR，CH功率，占用带宽，N分贝下降，相位噪声 | |||
Trace跟踪 | 3 Trace通道,TraceA,TraceB,TraceC | |||
Trace Operation跟踪操作:Clear/Write,Maxhold,Minhold,Average,View,Hide | ||||
Sweep扫描 | Continuous/Single连续/单次 | |||
Trigger触发 | Free Video(Zero Span)视频（零跨度） | |||
Marker标记 | 8 maximum, surport 1 reference with 7 Delta Markers | |||
Peak Search,Marker Delta,Marker+,Marker- 峰值搜索，标记三角洲，标记+，标记— | ||||
Span范围 | 0Hz,100Hz~4.2GHz | |||
Freq Slip,Span Zoom(1-2-5-10Sequence,4GHz,4.2GHz) | ||||
Scale | Log/Lin | |||
Log :0.1 to 1 0.1 step 1 to 10 1 step | ||||
Unit单位 | dBm,dBuV,dBV,W,mW,uW,pW,V,mV,uV | |||
Sensitivity灵敏 | Low,Medium,High低，中，高 | |||
Detector探测器 | Positive,Negative,Sample,Average,RMS | |||
Ref Level Offset 电平偏移 | -50dB to 50dB | |||
Multi-screen多屏 | 4 Maximum | |||
Frequency频率 | ||||
Frequency Range频率范围 | 10MHz ~ 4.2GHz | |||
Frequency Reference频率参考 | Aging:±1ppm | |||
Frequency readout accuracy频率读数精度 | ± (readout frequency x frequency reference accuracy + RBW centering + 0.5 x horizontal resolution ±（读出频率X频率基准精度+中心+ 0.5×水平分辨率带宽) | |||
Frequency Span Accuracy 频率间隔精度 | ±1% | |||
Sweep Time扫描时间 | 1.1ms~1600s 2.69ms~1600s Zero Span | |||
Resolution Bandwith分辨率带宽 | ||||
RBW Range范围 | 10Hz~5MHz,(1-2-3-5-10Sequence) | |||
RBW Accuracy精度 | RBW≥1MHz，±10% RBW＜1MHz,±2% | |||
Amplitude振幅 | ||||
Measurement Range测量范围 | DANL to +20dBm | |||
Input Attenuator Range 输入衰减范围 | 0~30dB,1dB step | |||
Max Safe input level Max安全输入电平 | Sensitivity灵敏度:low低 +30dBm Sensitivity灵敏度:medium中 0dBm Sensitivity灵敏度:High 高 -20dBm | |||
Reference Level range 参考值范围 | -140 dBm ~+20dBm -190dBm ~+70dBm (Ref Level Offset 电平偏移:ON) | |||
Amplitude Accuracy 幅度精度 | ATT set to 0 dB , input signal -5 to -30 dBm, Detector set to Positive ,Sensitivity set to Low, RBW auto-coupled, all other settings auto-coupled, 23±5℃ . Half hour warm-up required. ATT设置为0 dB，输入信号- 5 - 30 dBm，探测器设置为正，灵敏度设置为Low，RBW自动耦合，所有其他的设置自动连接，23±5℃. 半小时预热。 | |||
±1.5dB | ||||
RBW Swiching uncertainty RBW切换误差 | ±0.3dB | |||
Input Attenuator uncertainty输入衰减误差 | ±0.6dB | |||
Reference Level Accuracy 参考电平精度 | RL≥-60dBm，±0.8dB | |||
Display Average Noise Level(DANL) 显示平均噪声电平(DANL) | Input terminated, Detector set to Positive, Trace Average set to 1000, Span set to 50kHz,Reference level of -100 dBm, , all other settings auto-coupled, 23±5℃, normalized to 1 Hz RBW 输入终止，探测器设置为正，微量平均设置为1000，间距设置为50kHz，参考电平设置为100 dBm时，所有其他的设置自动连接，23±5℃，标准的 1 Hz RBW | |||
Sensitivity灵敏度 ：LOW低 1GHz，-131dBm/Hz（typical -133dBm/Hz） Sensitivity灵敏度：Medium中 1GHz，-151dBm/Hz（typical -153dBm/Hz） Sensitivity灵敏度：High高 1GHz，-168dBm/Hz（typical -169dBm/Hz） | ||||
Residual Responses | -75dBm | |||
Input Related Responses | 10M~1.285G, 3.22G ~3.7G <-70dBc 1.625G~1.775G <-55dBc 1.285G~1.625G, 1.775G~2.35G, 2.71G~3.22G <-42dBc 3.7G~4.2G <-35dBc 2.35G~2.71G <-25dBc | |||
Second harmonic distortion 二次谐波失真度 | 1.6GHz -70dBc | |||
Third-Order Intercept (TOI) | (–10dBm tones ,1MHz apart, Sensitivity LOW,Reference Level –10 dBm | |||
+15dBm | ||||
P1dB | +5dBm Norminal | |||
Phase Noise相位噪声 | 1GHz | -96dBc/Hz,@10kHz(typical -98dBc/Hz) -118dBc/Hz,@1MHz(typical -120dBc/Hz) | ||
General | ||||
System Setting系统设置 | Preset,SaveRecall,ScreenCopy,Print,Language,Service,About | |||
Connectors连接器 | RF In:N type,female,50 Ω USB:USB type C Power interface: Slim Tip,DC20V RF输入:N（F）,50 Ω USB:USB type C 电源接口 Slim Tip,DC20V | |||
Display显示 | 5.5 inch, 1280*720p 5.5英寸，1280 * 720P | |||
OS操作系统 | Android 安卓 | |||
Battery电池 | Type:Li-on Operation time:option1：6 hours norminal option2：3.5 hours norminal Charging time: option1：2.5 hours norminal option2：2 hours norminal Charging: 0°C to +35°C Must be in power off state 类型：锂电池 工作时间: 选项1：6 hours 标称 选项2：3.5 hours 标称 充电时间: 选项1：2.5 hours 标称 选项2：2 hours 标称 充电：0°C至35°C必须处于断电状态 | |||
Environmental环境要求 | Operating Temperature操作温度: 0°C to 50°C Storage Temperature存储温度: -20°C to 70°C | |||
Size尺寸 | 200mm*99mm*67mm（7.8 in*3.9 in* 2.6in） | |||
Weight重量 | 1.25kg（2.8 lb） with battery option1 1.05kg （2.3lb） with battery option2 | |||
Specifications 规格
Specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions. Specifications are warranted performance.include：
• After 30 minutes of warm-up time, where the instrument is left in the ON state.
• When using the internal reference signal.
If there are other special introdutions,test temperature is on 23±5℃.
Typical
Describes additional product performance information not covered by the product warranty. It is performance beyond specifications that 80% of the units exhibit with a 95% confidence level over the temperature range 23 ± 5 ºC, unless otherwise noted. Typical performance does not include measurement uncertainty. SignalHawk SH-42S must be within its calibration cycle. Nominal
A general, descriptive term or design parameter. It is not tested, and not covered by the product warranty. SignalHawk SH-42S must be within its calibration cycle.
SignalHawk SH-42S consists of 标准附件
Standard标准 | |
1 | Model SignalHawk SH-42S Spectrum Analyzer 频谱分析仪 |
2 | Hard Carring Case硬质携带箱 |
3 | Soft Carring Case软携带箱 |
4 | Power Adapter(Including Power cable,20V/4.5A output) 电源适配器（包括电源线，20V／输出4.5A） |
5 | USB cable (type C) USB 数据线 (type C) |
6 | USB OTG cable(type C) USB OTG数据线(type C) |
7 | Touch Pen 触摸笔 |
8 | USB drive u盘 |
9 | Introduction Manul(stored on USB drive and Menu selctable from SH-42S) 操作手册（存储在USB驱动器和sh-42s菜单中） |
