FNS-AX3-B50A-EFT电快速群脉冲发生器_电磁兼容（EMC）测试仪器-深圳市东测科技有限公司手机版

详细介绍

快速群脉冲发生器FNS-AX3-B50A技术参数：
快速群脉冲发生器FNS-AX3-B50ASPECIFICATIONS

SPECIFICATIONS

Parameters		FNS-AX3-A16A	FNS-AX3-B50A
Output voltage		200 to 4800V
Pulse parameters at 50 ohm		Pulse rise time 5ns ±30%, Pulse width 50ns ±30%　*1
Pulse parameters at 1k ohm		Pulse rise time 5ns ±30%, Pulse width 35 ns to 150 ns *1
Polarity		Positive, negative, polarity change burst by burst
Pulse frequency		0.1kHz to 2MHz *1
Burst duration		1 to 1000 pulses or continuous 1 pulse per 1ms burst period
Burst period		10 to 1000 ms ±10%, 10ms step
Continuous mode operation		10 KHz max （0.2 to 1kV）
Dynamic output impedance		50 ohms
Output connector		Coaxial （PULSE OUT）
Coupling/DC blocking capacitor		33nF/10nF
Frequency modulation		0 to -10% of setting
Timer （test duration）		1s to 9h 59m 59s 10 minutes max in the "continuous" and alternate polarity modes
External trigger		TTL down edge Minimum trigger interval acceptable: 10ms
Burst timing	Non-synchronization	Irrespective of EUT mains frequency
	Synchronization	Synchronizes with the EUT mains frequency 0 to 360 degrees ±10 degrees, 1 degree step Burst period: 50/60Hz
Internal CDN		85 to 240VAC 16A 50/60Hz 3-wire single-phase 125V DC/16A	85 to 500VAC 50A 50/60Hz 5-wire three-phase 125V DC/50A
Coupling line		L, N, PE	L1, L2, L3, N, PE
Coupling mode		Common mode
Dimensions （projection included）		（W） 320 x （D）352 x （H）400 mm
Character display		English, Chinese, Korean or Japanese
Weight		Approx. 14 kg	Approx. 19 kg

*1 Pulse specifications guaranteed over 5KHz to 100KHz.

TOUCH PANEL COLOR LCD EXAMPLES

Display Examples in Korean Display Examples in Chinese
快速群脉冲发生器FNS-AX3-B50A Manual mode	快速群脉冲发生器FNS-AX3-B50A Parameter settings
Self-explanatory graphical representation.	Touch parameters that require numerical inputs, a ten-key screen will appear.
快速群脉冲发生器FNS-AX3-B50A Standard Mode	快速群脉冲发生器FNS-AX3-B50A Sweep mode
The test specifications called for in the IEC61000-4-4 are preset.	Output voltage, pulse repetition frequency, placement phase angle, polarity and coupling line are the parameters, which can be automatically ramped or changed.