倍加福安全光束传感器

倍加福SC2/SC4是1根或2根安全光束传感器（包括发射器和接收器）的控制单元，*符合EN 954-1或IEC 61496的2级或4级标准。

控制单元和单光束SL或SLA12/29系列的安全传感器一起组成一个保护模块系统。
 

SC2/SC4提供了传感器所需的电源，发射器的触发，接收器接收信号的分析。相应安全等级的控制信号（通过两个继电器的强制触点）可以有效的输出。依赖于所使用的安全光电传感器，这个系统的检测范围可达65 m。

可选的功能，如继电器监控和启动/重启互锁，可以确保安全功能能被可靠的执行。使用者可以根据现场应用的需要选择这些操作模式。

应用：

对不断增加的危险部位的常规应用：

• 对操作点或“压力点”危险部位的人身保护
• 对进入危险区域的人或机器进行侦测
• 经常用来替代铺在地面上的压力传感器，用于监控需要保护的区域，监测是否有人员或机器的闯入。

安全盒系统可以很好的和满足EN 954-1标准1到4级的安全光电传感器，机械安全系统和安全开关相连。

系统经过了的标准认证：IEC 61496-1和EN 61508 （SIL3）。可以和众多的安全传感器相连，同时也提供了紧急停止功能，支持等级0和1，以及具有多种muting模式。安全盒具有IP20的防护等级，专为开关柜安装设计。

每个安全盒包括了一个牢固的底座，可以安装2到8个附加模块。这个底座用于机械和电气的连接，同时为每个独立的模块提供电源。

模块型号包括：

• OSSD模块（输出信号开关设备）
• 4通道CPU模块（4CP, 4XP, 4CG, 4XG）
• 支持4或6通道的传感器模块卡
• Muting模块
• E-stop模块
• 空槽盖板

安全盒可以连接的光栅和光幕：

• 电气感应保护设备（ESPE）
• 急停按钮
• 位置开关
• 开关垫和开关面板
• 磁性开关
• 门接触器和其它1或2通道的安全元件。

倍加福安全光束传感器

产品	简介
Safety control unit module SB4 Module 4CG	Sensor module, 4 sensor channels, Single module for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices （emergency off）, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Number of channels: 4
Safety control unit module SB4 Module 4CP/165	Sensor module, 4 sensor channels, Single module for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices （emergency off）, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Number of channels: 4
Safety control unit module SB4 Module 4XG/165	Sensor module, 4 sensor channels, Micro-Controller controls, Operating mode can be selected by means of DIP switches, Connection of a number of separate de-energising circuits, Number of channels: 4
Safety control unit SC2-2 24VDC	Evaluation device for safety thru-beam sensors SL12 and SL29, Test input （Type 2 according to IEC/EN 61496-1）, Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Number of channels: 2
Safety light grid with integrated control unit SLC-3/133	ATEX-approval for zone 2 and zone 22, Sensing range up to 20 m, Beam spacing 400 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Safety outputs OSSD, external status displays OSSD, Effective detection range: 0.2 ... 20 m, Connection: M20 cable gland , Cable diameter ∅5.5 ... 13 mm , terminal compartment with screw terminals, lead cross-section max. 1.5 mm2 , Number of beams: 3, Beam spacing: 400 mm
Safety light grid with integrated control unit SLPC10-4	Sensing range up to 10 m, 4-radial design, Beam spacing 300 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter, Number of beams: 4, Beam spacing: 300 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 separated fail safe semiconductor outputs
Safety light grid with integrated control unit SLPC10-4/31	Sensing range up to 10 m, 4-radial design, Beam spacing 300 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter, Number of beams: 4, Beam spacing: 300 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 relay outputs, force-guided NO-contact
Safety light grid with integrated control unit SLPC8-2/31	Sensing range up to 8 m, 2-radial design, Beam spacing 500 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Minimum wiring expense due to transceiver with passive mirror column, Effective detection range: 0.2 ... 8 m, Connection: M16 cable gland , terminal compartment with cage-terminals, Number of beams: 2, Beam spacing: 500 mm, Operating mode: Start/restart disable, relay monitor,, Safety output: 2 relay outputs, force-guided NO-contact
Safety light grid with integrated control unit SLPCM10-2-L/31	Sensing range up to 10 m, 2-radial design, Beam spacing 500 mm, Self-monitoring （type 4 according to IEC/EN 61496-1）, Red transmission light, Effective detection range: 0.2 ... 10 m, Connection: M16 cable gland , terminal compartment with cage terminals, M12 connector for transmitters, muting lamp, etc., muting sensors, lamp socket for muting lamp, etc., Number of beams: 2, Beam spacing: 500 mm, Operating mode: Start/restart disable, relay monitor, muting operating modes
Evaluation unit SLVA-4Kplus 115VAC-RI	Self-monitoring （type 4 according to IEC/EN 61496-1）, Evaluation device for safety thru-beam sensors SLA, for safety light grids SLP and for 2 channel safety devices （emergency off）, Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Number of channels: 4