美国AccuMAX SPECTROLINE XS-555/L亮度传感器，检测单位坎德拉
AccuMAX SPECTROLINE XS-555/L亮度传感器，可用于X射线观片灯的亮度检测，显示单位为坎德拉/米2（cd/m2），坎德拉/英尺2（cd/ft2）或英尺-朗伯(fL)。
SPECTROLINE AccuMAX系列数字式黑白两用照度计
美国Spectronics公司生产的SPECTROLINE AccuMAX系列数字式紫外线及白光强度计的主要特性：
? 微处理控制的主机XF-1000(适用于测量灯管式紫外光源)及XR-1000(适用于灯泡型高压汞灯式紫外光源)，可通过可更换传感器测量多种波长紫外线强度及蓝光和白光强度。
? 根据测量结果，自动切换量程及显示单位。
? 五个用户可定义的设置及三个主菜单操作模式(数据/正常模式，自动清零及积分)，具有数据保持、峰值及返回功能。
? 紫外强度分辨率达1uw/cm2，全程精度优于+/-5%，可溯源到NIST(美国国家计量院)标准
? 可显示紫外照射剂量及照射时间内的zui高强度及平均强度
? 的带通干涉滤色片
? 可以将探测器直接连在主机上，或通过USB连线将探测器连到主机上
? 的余弦曲线反应
? 用户可定义的省电模式及自动关机功能
? 两节9V碱性电池工作(含)
? 大的，易于观察的液晶显示
? 密封传感器外壳，及防水的USB连接器
? XF-1000主机外形尺寸(长x 宽x 高): 7.75x 4.25x1.25英寸(19.7x10.8x3.2cm)
? 主机重量1.1磅(499克)

美国AccuMAX SPECTROLINE XS-555/L亮度传感器，检测单位坎德拉
AccuMAX 系列强度计为的紫外线强度、剂量测量及可见光照度应用而设计。通过选配可更换传感器，可以测量紫外强度及紫外照射剂量(能量)。XR-1000及XF-1000主机为圆滑设计，外壳结实。根据不同的测量结果，自动选择显示单位，zui多显示四位数值。显示屏为3"液晶显示，带图标及数字显示。主机外套有可拆的橡胶保护套。同时可选配手提箱。

AccuMAX 传感器满足实验室及生物应用要求。传感器防水、具有密封外壳，高性能带通滤色片及的余弦反应。单波长的传感器可提供标准量程(XS系列)及特宽量程(XTS系列)。标准量程适传感器适合于检测管式及高压汞灯泡式紫外光源，特宽量程适合于特高强度紫外光源如紫外固化及光催化应用。同时可提供单波长可见光传感器(XS-555/l)及亮度传感器(XS-555/L)。而且，还可提供双波长传感器探测器XDS-1000，可同时测量长波UVA紫外线强度及白光照度。所有传感器可方便地直接和主机相连或通过USB连线和主机相连。如需要，可选配5英尺(1.5米)长带防水适配器的的USB连线(件号XCB-100)。

? 四个按钮便于轻松操作-直觉交互功能
? 菜单驱动，用户可选设置：选择测量显示单位及背景显示灯以适合运行环境。
? 屏幕显示仪器状态，电池电量水平，紫外线强度，波长及当前可提供的功能。
? 多功能控制主操作模式：数据/正常模式、自动清零模式及积分模式。
? 附加特性(峰值、保持及黑屏)嵌入在主操作模式中。
? 积分(INTG)模式对一段时间内照射到传感器的紫外线强度进行累积--对于紫外剂量/能量应用特别有用。

AccuMAX 微处理器控制的软件对用户是关键-提供友好操作、*功能及的读数。主机隔模面板上的四个压敏按钮提供多种*功能。软件驱动功能菜单使操作人员可以进入三种主操作模式：数据/正常模式、自动清零模式及积分模式。为了省电，除了积分模式，在其他所有模式下10分钟没有操作则自动关机。而且， 软件允许用户定义紫外线强度显示单位及液晶屏背景光设置。所有这些功能及其他可选功能通过软件的主菜单及子菜单都可轻松进入。

用户定义设置
AccuMAX 为用户提供方便的自动紫外线强度显示单位(uw/cm2,mw/cm2及w/cm2)。用户也可以选择及调整显示对比度、背景光亮度及主动和被动运行的时间间隔(有助于省时的功能)。除非主机处于低电量状态，否则所有的用户可选参数将进行保存便于将来操作使用。 

操作模式
数据/正常模式
此模式将实时测量照射到传感器上的全部紫外线强度。用户可以冻结读数及显示数据。在正常模式下，PEAK功能将冻结并显示记录的zui高强度值。

自动清零
在此模式下，AccuMax强度计自动减去"不想要的"环境光，所有测量的读数为相对于环境光的读数。保护用户数据-记录也由此模式进入。.
积分(INTG)
在积分模式，仪器将照射到传感器上的紫外线进行累计，之后显示吸收的总紫外能量(单位为焦耳/cm2)。在此模式下，Freeze冻结功能将所显示的过程保持在背景。为了方便操作，在积分模式，AccuMax将不自动关机，以便用户可以连续长时间测量紫外线剂量。

的英文介绍：

AccuMAX? Series for Laboratory
Digital Microprocessor-Controlled Meters
Features two advanced digital, microprocessor-controlled readout units (XF-1000 for fluorescent UV tubes; XR-1000 for HID UV bulbs) specially calibrated to complement a full line of interchangeable AccuMAX series sensor detectors
Software-driven functions provide multifaceted light level reading
User-selectable, multilingual display settings. Choose from English, French, German and Spanish.
Five user-customized settings and three main operation modes (absolute data/normal, autozeroing and integration) featuring hold, peak and back functions
Overall accuracy of better than ±5% with reference to NIST standards
Superior bandpass interference filter resists degradation and prevents undesirable radiation readings
Excellent linearity and cosine response
Choice of direct or USB cable connection between sensor detector and readout unit (XCB-50 USB cable included)
Large, easy-to-read monochrome LCD screen
Automatic shutoff and user-defined power save features
Powered by two 9-volt alkaline batteries (included)
Readout unit dimensions (W x L x H) : 4.25 in x 7.75 in x 1.25 in, 10.8 cm x 19.7 cm x 3.2 cm)
Readout unit weight: 1.1 lb (499 g)
 
The AccuMAX series is designed to provide accurate readouts for UV irradiance, visible illuminance or luminance light readings. When equipped with an interchangeable sensor detector, the AccuMAX readout unit can be used to perform fluorescent inspection (intensity check through normal operation) and UV dosing (energy check through integration operation). Both the XR-1000 and XF-1000 readout units feature a sleek design and rugged housing, maximum 4-digit autoranging and easy-to-read 3 inch monochrome LCD screen with icons and alphanumeric display. A removable, rubber protective boot for the meter is included. A padded carrying case is available as an accessory.
 

Four side-by-side buttons provide for easy operation of user-intuitive interactive functions
 
Menu-driven, user-selectable settings; customized visible units of measurement and backlight display to suit operating conditions
 
Screen displays meter status, battery power level, light intensity, wave type readings and user-available functions
 
Multiple-function control of main operational modes: absolute data/normal, autozeroing and integration
 
Multifaceted light level reading and access to additional features (peak, hold and back screen) embedded within main operational modes
 
Integration (INTG) mode sums up cumulative ultraviolet light exposed to sensor over an interval of time – useful for UV dosing applications
 
The AccuMAX meter’s microprocessor-controlled software is the key to its user-friendly operation, advanced functionality and accurate readouts. Four pressure-sensitive buttons on the readout unit’s membrane keypad offer an extensive array of advanced features. The software-driven function menu gives full access to the three main operating modes: absolute data/normal, automatic zero and integration. To save battery power, the meter automatically shuts off after 10 minutes of non-use in all modes, with the exception of integration. In addition, the software allows the user to customize units of measurement for visible light readouts, as well as LCD screen backlight settings. These functions and other user-selectable parameters are easily accessible though the software’s main and subordinate menus.
 
Customizing Settings
 
The AccuMAX provides users the capability of selecting the default visible unit of measurement in their choice of foot-candles (fc), lux, lm/ft2 or lm/m2. The user can also select and adjust the display contrast, backlight brightness and interval between active and passive operations, which also helps conserve battery power. Unless the meter is at low-battery status, all user-selectable parameters will be saved and used for future meter operations.
 
Operational Modes
 
Absolute Data/Normal
This mode will measure the real-time absolute total light to which the sensor is exposed. The HOLD function is accessible in this mode, giving the user the option to freeze the reading and display the data. The PEAK feature is also available in this mode, which will freeze and display the highest intensity reading recorded during normal operation.

Automatic Zero
In this mode, the AccuMAX automatically subtracts “unwanted” ambient light when measuring light output. All subsequent measurement readings will be relative to this zero light level, saving the user data-recording time. The HOLD and PEAK features are also accessible in this mode.

Integration (INTG)
In the integration mode, the meter sums up the cumulative ultraviolet light that the sensor is exposed to over an interval of time, then displays the resultant total energy absorbed in joules. This mode is useful for UV dosing applications when checking energy levels of the light source used. In this mode, the freeze feature will hold the displayed data static while continuing the integration process in the background. For convenience, the AccuMAX will not shut off automatically after 10 minutes (as it would in other functions), allowing the user to continue integrating for extended periods of time.

Sensor Detectors
AccuMAX sensor detectors are designed to meet virtually any laboratory or life science application. These detectors feature water-resistant, sealed sensor housings, superior bandpass interference filters and excellent cosine response. Single-wavelength detectors are available in both standard range (XS-series), ideal for checking the intensity of fluorescent UV tubes and HID UV bulbs, and extended range (XTS-series), useful for high-intensity light sources used in curing and photoactivation applications. Also available are a single-wavelength visible illuminance detector (XS-555/I) and a luminance detector (XS-555/L). All sensors can easily be connected to the readout unit either directly or with a standard USB cable. A special 5 foot USB cable with water-resistant adapter (XCB-100) is available as an accessory.

XRP-3000 AccuMAX? for NDT
Advanced Digital Radiometer/Photometer Kit
Single detector with dual sensors measures both ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI. Specially engineered for NDT applications.