We manufacture and sell hypoxia, hyperoxia, CO2 incubators, modular incubator chambers,
hot box systems, for IVF In Vitro Fertilization and stem cell and tissue culture.

Many investigators have requested a flow meter so they may determine when they have obtained a 100% exchange of gases.

If you are using the Modular Incubator Chamber （MIC-101） to create a hypoxic, hyperoxic or normoxic environment we would recommend purchasing one of our flow meters.

We have two types of flow meters which can be adjusted for flow rates between 3 and 25 liters/min （or 0.1-10 LPM）. The single flow meter （SFM 3001） is used to control the gas flow of premixed gases, and the dual flow meter （DFM 3002） can be used to mix gases in addition to controlling the gas flow rate （The dual flow meter should be used in combination with an O2 detector）. The volume of each incubator chamber is approximay 8 liters.

Expensive special gas used in creating hypoxic and hyperoxic culture conditions can be conserved through the use of the flow meter. Use of the Single or Dual Flow Meter allows precise control of the amount of gas that flows through the Modular Incubator Chamber or Hot Box System.

The Single Flow Meter （SFM 3001） is calibrated for 1.0 to 25 liter per minute （LPM） （or 0.1-10 LPM） and is used for controlling flow rate of pre-mixed gases. The Dual Flow Meter （DFM 3002） is often used in experiments requiring fine tuning of O2 and or CO2 concentrations to determine the effect of different gas mixtures. This system has two flow meters, one calibrated for 0.1 to 1.0 LPM and the other for 0.1 to 10 LPM. The Dual Flow Meter has two tubing ports allowing for the mixing of gases from two separate tanks.

When the gas inlet port of the flow meter for 0.1-1.5 LPM flow meter is closed, the Dual Flow Meter can be used for pre-mixed gases in the same manner as the Single Flow Meter.

Flow meters are accuray calibrated and have the same precision as the flow meter used for the full size continuous flow CO2 incubator chamber. They are set on a steel stand at an angle for ease of viewing and adjusting flow rate.

Use of Flow Meters with the Hot Box System.
In order to achieve maximum containment of [35S]-radioactive gases generated during protein labeling experiments, a Flow Meter must be used in conjunction with the Hot Box System and Hot Filters.

One year unconditional warranty against leaks, defects and breakage.

Please see instructions for flow meter protocols.

View printable instructions by selecting below.

The Hot Box System eliminates the hazard of contamination of personnel and equipment by radioactive gases. It isolates labeling experiments and allows you to regain full use of your CO2 incubator. Conduct experiments safely in the Hot Box System.


With millions of contaminating counts generated during typical labeling experiments, incubators must be decontaminated after every use. You can now conduct safe [35S] labeling experiments at a fraction of present cost!

The Hot Box System is compact and easy to use. Just place labeling experiment and a Static Hot Filter and flusk unit with desired gas mixture. Seal unit, remove Exhaust Hot Filter, and Flow Meter and place the Hot Box in a controlled temperature environment. To remove the labeled cells, reattach Exhaust Hot Filter and Flow Meter, and purge again. Dispose of both filters. It's that simple!

	Modular Incubator Chamber Used worldwide for two decades, this airtight chamber has been proven safe and reliable for in vitro fertilization, HIV isolation, hypoxia, organ culture and the culturing of a host of cell lines. Each unit is a self-contained incubator enabling you to create the desired tissue culture environment （gas concentrations and humidity）. 货号 品名 价格 MIC-101 1 ea. Modular Incubator Chamber 询价       One Modular Incubator Chamber consists of the following parts: Lid, base, 3 trays, stainless steel clamp, O-ring, 2 tubing clamps and tygon tubing. Conversion Kits For MIC-101: 货号 品名 价格 HMIC3S Conversion Kit with Single Flow Meter. 询价 Kit includes: 1 ea. Single Flow Meter, 1 ea. Hot Filters （5 exhaust and 5 static filter）, 1 ea. Hot Chimney,2 ea. Air Filter, 1 ea. Static Filter Post,1 ea. O-Ring   货号 品名 价格 HMIC3 Conversion Kit With Dual Flow Meter 询价 Kit Includes: 1 ea. Dual Flow Meter, 1 ea. HOT FILTERS （5 exhaust and 5 static filter） , 1 ea. HOT CHIMNEY, 2 ea. Air Filter, 1 ea. Static Filter Post, 1 ea. O-Ring
	Flow Meters Regulation of gas flow during purging is required to allow sufficient reaction time for irreversible binding of [35S]-volatile with the specially formulated charcoal in the Exhaust Hot Filter. Use Single Flow Meter with pre-mixed gases or Dual Flow Meter for on-site mixing of gases.   货号 品名 价格 SFM3001 Single Flow Meter （for premixed gases） 询价 DFM3002 DFM3002 Dual Flow Meter （for mixing gases） 询价
	Static Hot Filters Placed inside the chamber during experiments, the Static Hot Filter captures 85-90% of radioactive gases.
	Exhaust Hot Filters Any radioactive gases which have not had time to attach to the Static Hot Filter during the labeling experiment are trapped compley by the Exhaust Hot Filter during purging.
	Hot Chimney Used while thawing [35S]-Met/Cys, the Hot Chimney removes contaminating gases from manufacturer's reagent vial, reducing personnel exposure to radioactive gases during experimental set-up. It is designed with a Leur-Lock for safe attachment of syringe needle.

Hot-Box-System：

102

103

104

105

106

107