品牌
代理商厂商性质
苏州市所在地
瑞士Sylvac数显表805.5501.10 量程0-25
面议
瑞士SYLVAC数显千分表数据线926.6721.10
面议
瑞士SYLVAC新款内置蓝牙测高仪 HI-CAL 450
面议
瑞士Sylvac数显千分表805.7501
面议
0-100mm，瑞士SYLVAC数显高度计805.5661
面议瑞士SYLVAC数显高度规805.5661，0-100mm
面议
瑞士Sylvac数显千分表805.1501 0-25mm
面议
瑞士Sylvac数显杠杆千分表905.4321 代理店
面议
瑞士SYLVAC数显测高仪详情830.0150 苏州店
面议瑞士HAL-150高度测高仪830.0150 苏州店
面议
瑞士Girod杠杆千分表G-1543 产品优点
面议瑞士Sylvac公司小型电动测高仪Hi-Cal 300 轻巧坚固
面议瑞士TESA测高仪00730035_二维手动MICRO-HITE900测高仪 苏州特约店
订货号 Order No. | 描述 Description | 规格和尺寸 Model and Size | ||
00730033 | TESA MICRO-HITE 350测高仪 TESA MICRO Hite 350 | 350 |
|
|
00730034 | TESA MICRO-HITE 600测高仪 TESA MICRO Hite 600 |
| 600 |
|
00730035 | TESA MICRO-HITE900 测高仪 TESA MICRO Hite 900 |
|
| 900 |
以上每台测高仪包含下令组件(不含控制面板) Each set above consists of following components, without control panel | ||||
00730021 | TESA MICRO-HITE 测高仪主机一台 1 TESA MICRO-Hite main instrument |
|
| |
00730022 | TESA MICRO-HITE测高仪主机一台 1 TESA MICRO-Hite main instrument |
|
| |
00730023 | TESA MICRO-HITE 测高仪主机一台 1 TESA MICRO-Hite main instrument |
|
| |
00760143 | 标准测头安装座一个 1 Standard probe insert holder | |||
00760227 | 测球直径为5 mm的标准测头一只 1 Standard probe insert with a 5 mm dia. ball tip | |||
00760150 | 名义尺寸为20.00 mm的校准件一个 1 Master piece with nominal size 20.00 mm | |||
00760142 | 已安装就位的电子压缩气泵一个 1 Electric pump already mounted for generating the air cushion beneath the gauge base | |||
00760141 | 电池盒一个 1 Battery pack | |||
04761054 | 电源适配器一个, 110 ~ 240伏, 50 ~ 60 赫兹输入 1 Mains adapter, 110 to 240 Vac/50 to 60 Hz | |||
04761055 | 带欧式插头的电源线一根 1 Cable EU for mains adapter | |||
00760151 | TESA MICRO-Hite测高仪外罩一个 1 Dust cover for TESA MICRO-Hite |
|
| |
00760152 | TESA MICRO-Hite测高仪外罩一个 1 Dust cover for TESA MICRO-Hite |
|
| |
00760153 | TESA MICRO-Hite测高仪外罩一个 1 Dust cover for TESA MICRO-Hite |
|
| |
订货号 Order No. | 描述 Description |
| 价格 Price |
00760163 | TESA《POWER PANEL》控制面板 TESA Control Panel 《POWER PANEL》 | XXX |
机器将由卖方专业工程师在用户处现场安装, 并按出厂验收条件完成验收. 用户提供必要的辅助条件
The machine will be installed by a certified engineer from the seller and complete the inspection according to the seller’s specification.
机器的使用操作培训将由卖方专业工程师在用户现场主持, 培训时间为1~1.5天. 买方的操作员应具备基本的计量基础知识.
The operation training will be take on customer site with a period of one and half days, the operators from the buyer should have a basic knowledge on Metrology.
自在买方完成验收之日起, 买方提供12个月的保修期, 保修期满后提供终身有偿服务.
The seller provides 12 months of warranty since the date of inspection. Paid service will be provided for the long term.
· 主要特征 Key Features
TESA Micro Hite 具有自成一体的设计理念, 非常适合于一维和两维的几何坐标测量 – 内外长度, 高度,深度,阶梯尺寸和距离.
自动搜索zui高和zui低点的功能及其对zui大zui小值及其差值的记忆能力使之成为圆形尺寸的测量有效工具.
外加TESA 1G-13(选加附件)则更能按照ISO1101标准测量垂直度, 直线度, 平行度和端跳.
此测高仪安装在镀镍的坚固底座上, 底座上配有三个精密抛光支承, 气浮可使测高仪在测量平台上轻松移动.
金属光栅尺带有零位参考点, 测量头安装在滚珠轴承上, 驱动系统可锁定并进行微调(需选加附件).
计算机误差补偿更提高了长度,直线度和垂直度的测量精度.
TESA Micro Hite is a self-contained design made to measure in 1 or 2 coordinate directions – For length measurements in the form of internal, external, height, depth, step and distance dimensions of geometric elements with flat, parallel or cylindrical surface.
Automatic capture of the culminating point on bores and shafts – Memory functions <max.>, <min.> and <max.-min.> in dynamic probing.
TESA 1G-13 digital probe, as an option, lets you also measure any deviation from perpendicularity, straightness and parallelism as well as runout errors with result output in conformance with ISO1101.
The instrument is mounted on a rugged nickel plated base with bottom face including three supporting points finely lapped. Air cushion usable for easy move of the height gauge accross the surface plate.
Incremental glass scale with reference point. Measuring head mounted on a ball-bearing. Drive system can be locked or tighten. Fine adjust can also be additionally mounted(available as an option).
Extremely accurate measuring of deviations from length, straightness and perpendicularity due to the automatic correction of the bias errors through CAA(Computer Aided Accuracy).
· 技术指标 Performance Specifications
Model/ 型号规格 | TESA MICRO-Hite | |||
350 | 600 | 900 | ||
测量范围/ Measuring span | mm | 365 | 615 | 920 |
应用范围/ Application range 配标准附件/ With standard accessory 配订货号00760057的测头座/ With probe insert holder No. 00760057 配订货号S07001622的测头座/ With probe insert holder No. S07001622 | mm
|
520
575
745 |
770
825
995 |
1075
1130
1300 |
zui大允许误差(带标准附件)/ Max. permissible error, with standard accessory | (2+3L)μm, (L单位为米/L in m) | |||
重复性(带标准附件)/ Repeatability, with standard accessory | ±2s≤2μm | |||
运动速度/Displacement speed | 300 mm/s | |||
测量力/Measuring force | 1.6N | |||
机械垂直度/ Mechanical Perpendicularity | μm | <7 | <9 | <11 |
主机重量/ Net weights, without panel and battery pack | kg | 33 | 38 | 45 |
充电一次使用时间/ Life time of the rechargeable battery | 12小时/ 12 hours | |||
· 环境要求Required Specification
|
|
· TESA《POWER PANEL》控制面板测量功能/ TESA Control Panel 《POWER PANEL》Function of Control Panel
1) 主要特点/ Key Features:
内置一维和两维几何测量程序, 可完成各种常用几何量测量, 也提供垂直度,直线度测量的可能性. 提供99个测量程序可完成64种几何特征的测量. 可存储2500个测量数据. 具有数据统计功能, 测量结果可通过内藏打印机或外接A4打印机输出, PCMCIA记忆卡可存储测量程序和数据以便重复使用. 操作者可对屏幕显示进行多种控制和选择.
With dedicated program for measuring in 1 and 2 coordinate direction with geometri combination of the measured values. Lets you also measure perpendicularity, straightness and squareness. Provides 99 workpiece oriented measurement cycle including 64 features with related limits of size, programmable. Memory capacity for 2500 measured values. Statistical value processing(SPC). Result output via the built-in matrix printer or in A4 format using an external unit. PCMCIA memory card reader enabling measurement cycles and result to be stored. Operator-controlled on-screen display.
2) 主要测量功能/ Main Measuring function
主要测量功能 Definition of display symbols | 描述 Description |
| 不考虑测头直径时的测量 Measurements without taking a gauge head constant into account |
| 考虑测头直径时的测量 Measurement taking a gauge head constant into account |
| “连续性显示”测量模式 “Continuous Display” measuring mode |
| 上两次测量的差值 Difference of the last two probing |
| 上两次测量值的差值 Difference between the last two measured values |
| 选择两次触测 Select double probing |
| 选择单次触测 Select single probing |
| 取消A和B基准 Cancellation of reference A and B |
| 予置功能 “PRESET” function |
| 将显示的数值传给内藏打印机或外设 Transfer the value on the main display to the internal printer or to a peripheral |
| 在仪器存储器中存储数据 Confirm the data in the instrument memory |
| 计量单位选择 Choice of unit selection and number of decimals after the decimal point |
| 取消测量结果 Cancellation of the measuring results |
订货号 Order No. | 图例 Picture | 描述 Description |
00760140 |
| TESA 1G-13测头组件 TESA IG-13 Probe Set |
包含下列/Consisting of: | ||
00760139 |
| 一个TESA 1G-13数字测头 1 TESA IG-13 digital probe |
00760138 |
| 一个TESA 1G-13的附件 1 Attachment for TESA IG-13 |
其他附件/Other accessories： | ||
01960005 |
| 测量螺拴用的抬升尺 Lift lever for the measuring bolt |
03540501 |
| 10mm长的测头座 10 mm long extension for probe insert |
04761047 |
| 1G-13和加强型控制面板的连接电缆(1米) Connecting cable IG-13/Power Panel plus M(1m) |
S07020086 |
| 的TESA MEMOTAST测头 TESA MEMOTAST-special |
订货号 Order No. | 图例 B.Picture | 描述 Description |
|
|
00760173 |
| C. 小套装附件D. Partial set of accessories | · |
|
00760148 |
| E. 全套装附件F. Full set of accessories |
| · |
以下附件带塑料包装/Supplied in a suited plastic case with the following components | ||||
00760061 |
| 直径3mm的碳化钨球头测杆 1 Measuring insert with a 3 mm dia. Tungsten carbide ball tip | · | · |
00760060 |
| 直径10mm的碳化钨球头测杆 1 Measuring insert with a 10 mm dia. Tungsten carbide ball tip
| · | · |
00760066 | 桶形碳化钨测杆, 用于圆拄形孔测量和公制螺纹孔位置测量Measuring inserts with tungsten carbide, barrel-shaped measuring faces for cylindrical bores as well as for determining the position of metric (or similar) inside threads | 直径为1mm的测头(M3到M6螺纹) 1 insert with a 2,2 mm dia. (for M3÷M16) |
| · |
00760067 | 直径为4,5mm的测头(M6到M48螺纹) 1 insert with a 4,5 mm dia. (for M6÷M48) |
| · | |
00760068 | 直径为9,7mm的测头(M12到M150螺纹) 1 insert with a 9,7 mm dia. (for M12÷M150)
|
| · | |
00760074 | 圆盘形碳化钨测头,用于凹槽,狭缝测量 Measuring inserts with tungsten carbide disc tip for grooves, slots, centring shoulders etc. | E = 1 mm / 直径4,5 mm的测头 1 insert, E = 1 mm / 4,5 mm dia. |
| · |
00760075 | E = 2 mm / 直径14 mm的测头 1 insert, E = 2 mm / 14 mm dia. | · | · | |
00760076 | E = 3 mm / 直径19 mm的测头 1 insert, E = 3 mm / 19 mm dia. |
| · | |
00760082 |
| 直径为2mm的圆拄形碳化钨测头 1 insert with a 2 mm dia. Cylindrical carbide measuring face |
| · |
00760096 |
| 测座,可安装带M1.4或M2.5螺纹的TESATAST测头 1 Holder for TESATAST probe inserts having either a M1,4 or M2,5 thread
| · | · |
01860201 |
带M1.4螺纹和硬质合金球顶的TESATAST测头 TESATAST probe inserts with a carbide ball tip, M1,4 thread | 直径为1mm的测头 1 insert with a 1 mm dia. | · | · |
01860202 | 直径为2mm的测头 1 insert with a 2 mm dia. | · | · | |
01860203 | 直径为3mm的测头 1 insert with a 3 mm dia. | · | · | |
01860307 |
| 工具 1 Setting key | · | · |
00760093 |
| 10mm直径碳化钨测头,12mm长不锈钢测杆 1 Measuring insert with cylindrical measuring face ( 10 mm dia., 12 mm long). Stainless steel body, hardened. Tungsten carbide measuring face. | · | · |
00760086 |
| 测座,测量深度达110mm 1 Holder for meas. Depths up to 110 mm ( L = 75 mm) |
| · |
00760087 | 测座,测量深度达185mm 1 Holder for meas. Depths up to 185 mm ( L = 150 mm) |
| · | |
00760057 | 测座, 提高测量范围 1 insert holder for extending the application range |
| · | |
00760094 |
| 不锈钢测杆,一端为平面,另一端为球面 1 Measuring insert with a stainless steel pin, hardened with one flat and one spherical carbide measuring face. Interchangable pin. | · | · |
S07001622 |
| 测座, 提高测量范围 Probe insert holder for extending the application range |
|
|
