TEM Grid Holder on a Pin网格支架

This EMS new release allows for the holding of up to 4 grids. Made from Aluminum with a brass Screw this holder allows you to image and analyze specimens on TEM Grids in the SEM. The Overall diameter of the holder is 1" （25mm） with a 1/8" Pin （3.2mm） and a longer pin 0.6" （15mm）. The Grid locations are all numbered

此EMS新版本允许保存4个网格。 由铝制成，带有黄铜螺丝，该支架允许您在SEM中的TEM网格上成像和分析样品。 支架的总直径为1英寸（25毫米），带有1/8“针（3.2毫米）和更长的针脚0.6英寸（15毫米）。网格位置均为编号。