支持6500W大功率精密水冷式氙灯灯管
- 总曝晒面积:6,500 cm2 (1,008 in2)
- 自动旋转式3层样品架
- 大屏幕全彩色TFT显示自动诊断信息
- 直接设置和控制辐照度340nm、420nm、300-400nm
- 直接控制箱内温度及黑板或/和黑标温度
- 直接设置和控制相对湿度
- 直接设置和控制试验舱内空气温度
- 显示诊断信息
- 内置14个zui主要标准
- 支持12个客户自定义编程
- 多语种显示(中、英、法、德、西、日、韩)
- U盘数据输出接口
- 内置的Smart Damper™自动送风风速调节及智能化调风系统
- 内置的Smart Light™智能化灯光监测系统
- 样架背面喷淋系统
- 过滤组合以满足全部测试标准
- 进气管除尘过滤器
- CS-7氙灯冷却系统
- 自动水质监控及自动报警
- 参照氙灯校准
- 试验箱观察窗
- 通用电源系统,适用于各种频率、电压和电气要求
- 电气安全性能满足CE、UL、CSA、EN、ISO标准
- 以辐照量和时间为单位自动倒计时功能
- 样品架可容纳多种类型的样品
- VibraSonicTM加湿系统
-
选项
BPT/BST双控:可选
- 辐照度控制:340/420或300-400nm选择单点自动控制,可选第二点监控
- 安装在风道里的制冷线圈(不包含必要的制冷装置)
- S3T特定试件表面温度系统
- View(气候观察)数据获取系统
- LiquiAirTM - LiquiAir热交换器可减少Ci5000氙灯冷却系统对自来水的需求,该系统采用室内外的空气来冷却氙灯水。
- 室内空气和去离子水制冷
-
可选配置
样品面独立辐照度校准及测量的XenoCal辐照度校准装置
- 满足特殊测试要求的辅助过滤灯罩
- Caster(4脚)包括适配器和安装说明
- LS-200全谱监测设备
- 伸展腿(4脚:提升装置 15厘米)
AATCC TM169
Weather Resistance of Textiles: Xenon Lamp Exposure
- ASTM C1257
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants - ASTM C1442
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus - ASTM C1501
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures - ASTM C732
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants - ASTM C734
Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering - ASTM C793
Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants - ASTM D1148
Standard Test Method for Rubber Deterioration?Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces - ASTM D1670
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials - ASTM D2565
Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications - ASTM D3424
Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter - ASTM D3451
Standard Guide for Testing Coating Powders and Powder Coatings - ASTM D4101
Standard Specification for Polypropylene Injection and Extrusion Materials - ASTM D4303
Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints - ASTM D4355
Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus) - ASTM D4434
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing - ASTM D4459
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications - ASTM D4798
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) - ASTM D4811
Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing - ASTM D5010
Standard Guide for Testing Printing Inks and Related Materials - ASTM D5019
Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane - ASTM D5071
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus - ASTM D5383
Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists - ASTM D5398
Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User - ASTM D5819
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability - ASTM D6083
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing - ASTM D6551
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus - ASTM D6577
Standard Guide for Testing Industrial Protective Coatings - ASTM D6662
Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards - ASTM D6695
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings - ASTM D6878
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing - ASTM D7869
Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings - ASTM F1164
Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress - ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources - ASTM G155
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials - FLTM BO 116-01
Resistance to interior weathering - GB/T 8427
Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test - GM 9125P
Procedures for Laboratory Accelerated Exposure of Automotive Materials - GME 60292
Designation of Colour Fastness and Resistance to Artificial Light - GMW 14162
Colorfastness to Artificial Weathering - GMW 14650
Performance Requirements for Exterior Plastic Parts - GMW 3414
Test Method for Artificial Weathering of Automotive Interior Trim Materials - IEC 61345
UV test for photovoltaic (PV) modules - ISO 105-B02
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test - ISO 105-B04
Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test - ISO 105-B06
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test - ISO 105-B10
new standardTextiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation - ISO 11341
Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation - ISO 12040
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light - ISO 16474-1
Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance - ISO 16474-2
Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - ISO 18909
Photography - Processed photographic colour films and paper prints - Methods for measuring image stability - ISO 3917
Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering - ISO 4892-1
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance - ISO 4892-2
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources - JASO M346
Light-exposure test method by xenon-arc lamp for automotive interior part - JASO M351
Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts - JIS B 7754
Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type) - JIS D 0205
Test Method of Weatherability for Automotive Parts - MIL-STD 810F
Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine) - MIL-STD 810G
Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine) - Peugeot Citroen (PSA) D47 1431
Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures - SAE J1885
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus - SAE J1960
Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus - SAE J2412
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus - SAE J2413
Protocol To Verify Performance of New Xenon Arc Test Apparatus - SAE J2527
Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus - VDA 621-429
Tests for automotive coatings - Weathering test for colour fastness - VDA 621-430
Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats - VDA 75202
Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc - VW PV 3930
Non-Metallic Materials - Weathering in Moist, Hot Climate
ASTMG155/ASTMG151/ASTMF1164耐氙灯老化试验机ASTMG155/ASTMG151/ASTMF1164耐氙灯老化试验机