SMC速度控制阀,80-AS1001F-04

SMC速度控制阀通常，在节流、调节控制与泥浆介质中，要求结构长度短，启闭速度快（1/4转）。低压截止（压差小），推荐选用SMC带先导式单向阀的速度控制阀。 
SMC速度控制阀在双位调节、缩口地通道、低噪声、有气穴和气化现象，向大气少量渗漏，具有磨蚀性介质时，可以选用蝶阀。
在特殊工况条件下节流调节，或要求密封严格，或磨损严重、低温（深冷）等工况条件下使用蝶阀时，需使用特殊设计金属密封带调节装置地三偏心或双偏心地蝶阀。

SMC速度控制阀,80-AS1001F-04
・采用按压锁定式，针缩的操作性提高。
・手轮加大。
・管子拆装性提高。
插入力zui多减小30％（8N）。
脱离力zui多减小20％（5N）。※
※管子的抗拉拔强度与现行品相同。
・无电解镀镍规格已标准化。。
・可360°/自由配管（万向型）。

1. Perform maintenance and inspection according
to the procedures indicated in the
operation manual.
If handled improperly, malfunction or damage of machinery
and equipment may occur.
2. Maintenance work
If handled improperly, compressed air can be dangerous.
Assembly, handling, repair, and element replacement of
pneumatic systems should be performed by a knowledgeable
and experienced person.
3. Drain flushing
Remove drainage from air filters regularly.
4. Removal of equipment, and supply/exhaust
of compressed air
Before components are removed, first confirm that measures
are in place to prevent workpieces from dropping, run-away
equipment, etc. Then, cut off the supply pressure and electric
power, and exhaust all compressed air from the system using
the residual pressure release function.
When machinery is restarted, proceed with caution after
confirming that appropriate measures are in place to prevent
sudden movement.

80-AS1001F-04
80-AS1201F-M304
80-AS1201F-M504
80-AS1201F-M506
80-AS1201FMM504
80-AS1211F-M504
80-AS1301F-M504
80-AS1301F-M506
80-AS1311F-M504
80-AS2201F0104S
80-AS2201F0106S
80-AS2201F0206S
80-AS2201F0208S
80-AS2301F0206S
80-AS3000-03
80-AS3201F0312S
80-AS4000-04

：蒋美丽
 3269187186
： 3269187186
：0769—33510282
0769—23836321全国供货地区，欢迎订购!!!
我司优势品牌：
德国宝德burkert电磁阀，德国festo费斯托气动元件
日本品牌：日本SMC气动元件，日本CKD喜开理气动元件，日本小金井气动元件