R&S/罗德与施瓦茨 品牌
代理商厂商性质
深圳市所在地
6247C / 6247G直流电压/电流源/监视器
简要描述;简介
6247C / 6247G是一款直流电压电流源/监控器，专为评估需要高效率和低功耗的高压半导体和LED灯具而设计。 它能够输出高达+250 V的电压和高达±320 mA的电流，并具有高源（100μV/ 100 pA）和测量（10μV/ 10 pA）分辨率。 6247C / 6247G配有各种扫描和测量功能。 它提供与多个单元和其他仪器的同步操作，使其非常适用于电子元件测试系统。
6247C / 6247G直流电压/电流源/监视器
关键事实
-15 V至+250 V / 0至±320 mA
直流和脉冲操作
测试高压LED灯具
GPIB / USB（6247G）或RS232 / USB（6247C）接口
Specifications
| Voltage Source/Measurement Range | ||||
| Range | Source Range | Setting Resolution | Measurement Range | Measurement Resolution |
| 5 V | -1.0000 to +5.0000 V | 100 μV | -1.00999 to +5.00999 V | 10 μV |
| 50 V | -10.000 to +50.000 V | 1m V | -10.0999 to +50.0999 V | 100 μV |
| 250 V | -15.00 to +250.00 V | 10m V | -15.099 to +250.999 V | 1m V |
| Current Source/Measurement Range | ||||
| Range | Source Range | Setting Resolution | Measurement Range | Measurement Resolution |
| 3 μA | 0 to ±3.2000 μA | 100 pA | 0 to ±3.20999 μA | 10 pA |
| 30 μA | 0 to ±32.000 μA | 1 nA | 0 to ±32.0999 μA | 100 pA |
| 300 μA | 0 to ±320.00 μA | 10 nA | 0 to ±320.999 μA | 1 nA |
| 3 mA | 0 to ±3.2000 mA | 100 nA | 0 to ±3.20999 mA | 10 nA |
| 30 mA | 0 to ±32.000 mA | 1 μA | 0 to ±32.0999 mA | 100 nA |
| 300 mA | 0 to ±320.00 mA | 10 μA | 0 to ±320.999 mA | 1 μA |
| Resistance Measurement Range | ||||
| Range | Measurement Range | Measurement Resolution | ||
| Determined by voltage range/current range calculations | 0 Ω to 125 GΩ | Minimum 30 µΩ | ||
| Output Noise | ||||
| For voltage source, within the range from no load to the maximum load [Vp-p] For current source, at the following load [Ap-p] | ||||
| Range | Load resistance | Low Frequency Noise | High Frequency Noise | |
| DC to 100 Hz | DC to 10 kHz | DC to 20 MHz | ||
| 5 V | - | 200 μV | 400 μV | 10 mV |
| 50 V | - | 300 μV | 1 mV | 10 mV |
| 250 V | - | 500 µV | 5 mV | 10 mV |
| Source and measurement function | |
| DC source and measurement | Source and measurement of DC voltage and current |
| Pulse source and measurement | Source and measurement of pulse voltage and current (However, measurement auto range in pulse source is impossible) |
| DC sweep source and measurement | Source and measurement by Linear, Two slope linear, Random and Fixed levels |
| Pulse sweep source and measurement | Source and measurement by Linear, Two slope linear, Random and Fixed levels(However, measurement auto range in pulse source is impossible) |
| Integration Time | 9 types available: 100 μs, 500 μs, 1 ms, 5 ms, 10 ms, 1PLC, 100 ms, 200 ms and S/H S/H: Sample hold (integration time: 100 μs) measurement (Enabled only in the pulse source and pulse sweep source modes.) (PLC: Power Line Cycle 50 Hz: 20 ms, 60 Hz: 16.66 ms) |
| Sweep Mode | Reverse ON (round) / OFF (one way) |
| Sweep repeat count: | 1 to 1000 times or infinite |
| Maximum number of sweep steps | 8000 steps |
| Random Sweep Maximum Memory | 8000 data |
| Measurement data memory | 8000 data |
| Measurement Auto Range | Available only in VSIM or ISVM |
| Measurement Function Link Mode | Links the source function to the measurement function (VSIM or ISVM) ON/OFF available |
| Limiter | The HI and LO limiters can be set individually. (However, current limiters of the same polarity are not allowed.) |
| Calculation Functions | NULL calculation Comparator calculation (HI/GO/LO) Scaling calculation MAX/MIN/AVE/TOTAL calculation |
| Trigger Style | Auto-Trigger, external Trigger |
| Output Terminal | Front; Safety sockets, HI OUTPUT, HI SENSE, LO OUTPUT, LO SENSE |
| Maximum input | +250 V/-15 V peak Max (between HI-LO) 2 V peak Max (between OUTPUT and SENSE) 250 V Max (between LO and chassis) |
| Maximum Remote Sensing Voltage | ± 1 V MAX HI OUTPUT - HI SENSE, LO OUTPUT - LO SENSE (The voltage between HI SENSE and LO SENSE must be within the maximum output voltage range) |
| Voltage measurement input resistance | 10 GΩ or higher |
| Voltage measurement input leak current | ±100 pA or lower |
| Interface Function | |
| GPIB | (6247G only) Compliant with IEEE-488.2-1987 Interface function; SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2 Connector; Amphenol 24 pin |
| RS-232 | (6247C only) Compliant with EIA232C (RS-232) Baud rate; 19200, 9600, 4800, 2400, 1200, 600, 300 Parity; even, odd and none Number of data bits; 7 bits, 8 bits Number of stop bits; 1 bit, 2 bits Connector; Dsub 9 pin |
| USB interface | USB 2.0 Full-speed Connector; Type B |
| External control signal | TRIGGER IN, INTERLOCK, OPERATE IN, OPERATE OUT,SYNC OUT Connector; BNC |
| General Specification | ||||
| Operating environment: | Ambient temperature: 0 ºC to +50 ºC Relative humidity: 85% or less, no condensation | |||
| Storage environment: | Ambient temperature: -25 °C to +70 °C Relative humidity: 85% or less, no condensation | |||
| Display: | 60 minutes or more | |||
| Power supply: | AC power supply 100 V/120 V/220 V/240 V (User selectable) | |||
| Option number | Standard | OPT. 32 | OPT. 42 | OPT. 44 |
| Power voltage | 100 V | 120 V | 220 V | 240 V |
| Specify the option when ordering. Use a power cable and a fuse that are compliant with the safety standard when changing the power supply voltage. | ||||
| Power consumption: | Approx. 212 (W) x 88 (H) x 450 (D) mm | |||
| Mass: | 7.3 kg or less | |||
| Safety: | Compliant with IEC61010-1 Ed.3 | |||
| EMI: | EN61326-1 class A | |||
