R&S/罗德与施瓦茨 品牌
代理商厂商性质
深圳市所在地
CMW配件
简要描述;简介
带有R＆S®CMW-Z11的R＆S®CMW-Z10具有出色的屏蔽效果和的耦合特性，R＆S®CMW-Z10可用于高达6 GHz的频率。 这些出色的功能与模块化选项概念相结合，使得RF屏蔽盒对于任何无线电通信测试仪都是*的。
射频屏蔽盒由坚固的铝制成。 它通过一个具有限定挡块的杠杆手柄牢固地关闭。 这确保了围绕整个箱体提供的密封线的均匀压缩。 盖子内衬吸收材料，可zui大限度地减少反射。
天线耦合器板上的天线结构经过优化，可实现出色的无线连接。 高度宽带螺旋天线可用于各种应用。
CMW配件
关键事实
频率范围高达6 GHz
出色的屏蔽特性（<80 dB）
宽带螺旋天线允许多种应用
优化的天线结构可实现的RF耦合
人体工程学关闭机制
足够的平板电脑空间
特点与优势
宽频率范围高达6 GHz
带R＆S®CMW-Z11的R＆S®CMW-Z10适用于高达6 GHz的应用，因此涵盖了GSM，UMTS，LTE，CDMA2000®，WLAN，Bluetooth®和GPS等所有常见无线标准。它提供了高屏蔽效能，使外部干扰的影响降至zui低。
超低的反射
RF屏蔽盒的盖子衬有吸收材料以减少反射。作为DUT位置的函数，强反射会引起衰减的显着变化。
模块化选项概念和灵活的模块分配
带R＆S®CMW-Z11的R＆S®CMW-Z10具有四个用于不同可选模块的模块插槽。可用的选件目前包括25针D-Sub馈通（R＆S®CMW-Z12），USB 2.0馈通（R＆S®CMW-Z13），双N连接器（R＆S®CMW-Z14）和15针D- Sub馈通（R＆S®CMW-Z15）用于双向音频测试。也可以插入客户特定的模块。
足够的空间可以实现定位，即使对于诸如平板电脑等大型DUT也是如此
即使是大型DUT，例如平板电脑，也可以适应。 RF屏蔽盒为定位DUT提供了充足的空间，可以zui大限度地减少DUT和测试仪之间的耦合衰减。
专为苛刻的，持续的工作和人体工程学操作而设计
射频屏蔽盒设计可承受服务和制造环境中遇到的恶劣条件。关闭机构经过优化，符合人体工程学使用，确保防疲劳操作，同时提供高质量的结果。
天线分集和MIMO测试
R＆S®CMW-Z16第二个天线选件是圆极化的第二个天线元件，可以测试发射分集天线和多输入多输出（MIMO）系统。
R＆S®CMW-Z16安装在射频屏蔽盒的背面，可实现MIMO DUT（如LTE MIMO 2x2）的辐射耦合。标准天线向第二个天线元件（R＆S®CMW-Z16）提供90°方向的耦合场。这提供了近场环境中MIMO设备的耦合。
双向音频测试
R＆S®CMW-Z15音频测量选件提供R＆S®CMW-Z10中双向音频测量所需的附件。音频测量所需的麦克风和扬声器可以地定位在RF屏蔽盒内。音频信号通过屏蔽D-Sub馈通传输，以zui大限度地减少外部干扰对屏蔽盒特性的影响。音频信号通过RF接口传输到无线电通信测试仪的音频编码/解码器。音频路径可以通过比较原始信号和恢复的信号来测量。
Specifications
| R&S®CMW-Z10 RF shield box with R&S®CMW-Z11 antenna coupler | ||
| Shielding effectivness | ||
| Including R&S®CMW-Z11, R&S®CMW-Z12 and R&S®CMW-Z14 | 0.4 GHz to 4 GHz | > 80 dB |
| 4 GHz to 6 GHz | > 60 dB | |
| With R&S®CMW-Z13 mounted | 0.4 GHz to 4 GHz | > 60 dB |
| 4 GHz to 6 GHz | > 55 dB | |
| Outer dimensions | W × H × D | 320.9 mm × 267.5 mm × 527.7 mm (12.6 in × 10.5 in × 20.8 in) |
| Weight | 9 kg (19.8 lb) | |
| R&S®CMW-Z11 antenna coupler | ||
| VSWR | VSWR without DUT, with R&S®CMW-Z110, R&S®CMW-Z10 open | |
| 0.4 GHz to 1.4 GHz | < 3.5 | |
| 1.4 GHz to 3.5 GHz | < 2 | |
| 3.5 GHz to 6 GHz | < 3.5 | |
| Max. power ratings | from DUT | +37 dBm |
| from R&S®CMW | +33 dBm | |
| Polarization | circular | |
| Connector | N female | |
| R&S®CMW-Z12 Var02 D-Sub feedthrough | ||
| Power pins 14 to 18 | max. current rating, per pin | 1 A |
| max. rated voltage | 15 V | |
| cut-off frequency | 1 kHz | |
| Data pins 1 to 13 and 19 to 25 | max. current rating | 50 mA |
| max. rated voltage | 15 V | |
| max. pass frequency | 5 MHz | |
| filter shunt capacitance | < 800 pF | |
| R&S®CMW-Z12 Var04 D-Sub feedthrough, extended DC power pin connectors | ||
| Power pins 12 to 18, 24, 25 | max. current rating, per pin | 1 A |
| max. rated voltage | 15 V | |
| cut-off frequency | 1 kHz | |
| Data pins 1 to 11 and 19 to 23 | max. current rating | 50 mA |
| max. rated voltage | 15 V | |
| max. pass frequency | 5 MHz | |
| filter shunt capacitance | < 800 pF | |
| R&S®CMW-Z13 USB 2.0 feedthrough | ||
| Connector inside antenna coupler | USB-A | |
| Connector outside antenna coupler | USB-B | |
| Power supply | max. current rating | 0.5 A |
| rated voltage | 5 V | |
| Data rate | low speed | |
| full speed | ||
| USB 2.0 high speed | ||
| R&S®CMW-Z14 RF feedthrough | ||
| Connector inside antenna coupler | 2 × N female | |
| Connector outside antenna coupler | 2 × N female | |
| Impedance | 50 Ω | |
| Frequency range | 0 Hz to 6 GHz | |
| R&S®CMW-Z15 audio measurement option | ||
| Supply pin 1, ground pin 2 | rated voltage | 5 V |
| supply current | < 10 mA | |
| Microphone output pin 11, microphone ground pin 3 | recommended operating frequency | 1 kHz |
| operating frequency range | 300 Hz to 10 kHz | |
| max. rated output voltage | 1 V (pp) | |
| gain settings (switches inside) | +10 dB (default), 20 dB and 0 dB | |
| Speaker input pin 5, speaker ground pin 15 | operating frequency range | 300 Hz to 5 kHz |
| max. rated input voltage | 20 V (pp) | |
| nominal input impedance | 600 Ω | |
| R&S®CMW-Z16 second antenna element for diversity/MIMO measurements (R&S®CMW-Z14 required) | ||
| VSWR | VSWR without DUT, with R&S®CMW-Z110, R&S®CMW-Z10 open | |
| 0.45 GHz to 1.4 GHz | < 3.5 | |
| 1.4 GHz to 3.5 GHz | < 2.3 | |
| 3.5 GHz to 6 GHz | < 3.5 | |
| Max. power rating | from DUT | +37 dBm |
| from R&S®CMW | +33 dBm | |
| Polarization | circular | |
| Connector | N female with N feedthrough | |
| R&S®CMW-Z17 barcode kit for video analysis (R&S®CMW-Z12 required) | ||
| Preconditions | with R&S®CMW-Z10/R&S®CMW-Z11 |
|
| standalone operation | requires R&S®CMWrun software option R&S®CMW-KT104 plus dedicated signaling extension for control and evaluation of video quality based on barcodes. | |
| Decode rate | 60 decodes per second | |
| Focal range | minimum distance between barcode scanner and DUT screen for a DUT screen width of | |
| 39 mm (1.5 in) | 50 mm (2.0 in) | |
| 114 mm (4.5 in) | 170 mm (6,7 in) | |
| Power supply | max. current rating | 800 mA |
| rated voltage | 5 V DC ± 5 % | |
| Dimensions (W × H × D)1) | horizontal DUT position | 255 mm × 166 mm × 285 mm(10.0 in × 6.5 in × 11.2 in) |
| vertical DUT position | 255 mm × 146 mm × 285 mm(10.0 in × 5.8 in × 11.2 in) | |
1)Height is reduced by 5 mm (0.2 in) when base plate is not used.
