B-02 Temperature Chamber1 SetMODEL : TX-T-800S
A. CONSIST OF ;
1) Designed by fire-resistance typeChamber part
2) Water cooling TypeTemp. Controlled system
3) Water cooling Type Circulation system
4) Freezing System
5) Instrument panel
6) Safety device
7) Accessories
8) Humidity meterand Recorder
9) Dispatch Refrigerating Engineer on-site
COMMODITY DESCRIPTION
H.S.No.ITEM NO.COMMODITYUNITQ&ty
B-02 Temperature ChamberSYSTEM1
MAKER: Technox .MODEL: TX-T-800S
A. Features;
1. Designed by fire-resistance type Chamber
2. Water cooling TypeTemp. Controlled system
3. Humidity meterand Recorder
4. Dispatch Refrigerating Engineer on-site
B. Specification;
1) Chamber part (Designed by fire-resistance type Chamber)
- Dimensions (in): 700 x 700 x 700 (W*D*H)mm
- Dimensions (out): 950 x 1150 x 1920 (W*D*H)mm
- Material ( in) : SUS 304 1.2T Polyshed plate
- Material (out) : SS41 steel plate & with baked coating finish
- Insulations : Poly-urethane foam & glass wool
- Door packing : Silicon packing
2) Temp. Control system (Water cooling Type)
- Test temp. range : -70℃~ 150℃
- Temp. range : ±0.2℃
- Temp. Uniformity: ±1℃
- Temp. heat up rate : -40 ~ 85℃heating
- Temp. Pull down rate : RT ~ -40℃Cooling
- Temp. Program controller: * Model: TH-500
* Maker: HANYOUNG NUX
* P.I.D auto tuning control / alarm monitor system
* 99 Pattern / 800step
* Communications: RS- 232/485
- Temp. Sensor: PT100?
- Heater: STS pipe fin heater 6.0kW (TEMP)
3) Circulation system
- Sirocco fan : 3" x 6" x 4
- Circulation motor : 60W x 1SET
4)高低温试验箱Freezing System
- Dual freezing system
- Refrigerant M/C: 2HP x 2SET / 1.0HP x 1set
- Refrigerant : R404a & R23
- Cooling system : Water cooling Type
5) Istrument panel
- Program Temp. controller
- Main & Lamp S/W
- Recorder
- Emegency
- Humidity Meter
6) Safety device
- N.F.B
- Over heat protector
- Motor Over load relay
- Refri. Over load relay
7) Accessories
- Cable port: ￠50 x 1ea
- Shelves: STS mesh type x 2set
8)高低温试验箱Recorder
- Model: GR-100
- 2 point digital
- Maker : HANYOUNG NUX
9) Power source: 380V / 50HZ 3Phase10.0KW
10) Warranty
- In the free repair service
- The manual offer
C. Remarks
1) Original catalogue and specification are attached.
2) Installation and a test-run should be performed by a qualified engineer.
3) one year warranty should be provided after the installation.
4) Dispatch Refrigerating Engineer on-site
本产品执行以下标准：
GB11158 高温试验箱技术条件
GB10589 低温试验箱技术条件
GB10592-89 技术条件
GB/T2423.1-2001 低温试验箱试验方法
GB/T2423.2-2001 高温试验箱试验方法
GB/T2423.22-2001 温度变化试验方法
IEC60068-2-1.1990 低温试验箱试验方法
IEC60068-2-2.1974 高温试验箱试验方法
GJB150.3 高温试验
