Experimental spray dryer-6000YBrief description:

 1. Equipped with high borosilicate glass; 

2. The housing adopts spray molding ;

3. Equipped with original QFN-VER-0.5 drying system; 

4. Clear view of the atomization process;

Experimental spray dryer-6000YDetailed description:

 QFN-6000Y spray dryer is mainly suitable for colleges and universities, the Research Institute and the laboratory of food and medicine and chemical industry produce micro particle powder. It has broad spectrum and applicability for all solutions such as emulsion and suspension. It is suitable for the drying of thermal sensitive substances such as biological products, biological pesticides, enzymes and so on. Because the ejected material is only subjected to high temperature when sprayed into mist - sized particles , it is only momentarily heated, so It can keep these active materials dry and keep their active ingredients intact.

Main features:

1,Two-fluid nozzle, high efficiency.

2, Color LCD touch screen parameters display: inlet temperature ,outlet temperature ,peristaltic pump speed,air volume,needle frequency.

3,Automatic control: one button boot, set spray process parameters, temperature to the predetermined temperature, creeping pump to start itself, The running animation is displayed on the touch screen, and the running flow is clearly displayed. When the machine is shut down, it only needs to press the stop button, and the machine automatically shuts down safely.

4, Equipped with nozzle cleaner (Through needle), when nozzle is blocked, it will be cleared automatically and the frequency of needle can be adjusted automatically.

5, Shutdown protection function: when the machine is shut down, just press the stop button. The machine stops running immediay except the fan to ensure that the equipment will not be operated by mistake( Force off the fan ) and cause the heating part to burn out.

6,The spray, drying and collection systems are made of transparent, high-quality, high-boron-silicon heat-resistant glass materials, allowing the drying process to be carried out in a non-polluting environment.

7, Built-in imported compley oil-free air compressor, powder injection diameter is normal distribution, fluidity is very good, noise is very low, less than 60 db.

8, Two-fluid spray atomization structure, the machine is made of high-quality stainless steel material, compact design, no accessory equipment.

9, The design of dryness temperature control using real-time control PID constant temperature control technology can make the temperature accurate in the whole temperature zone , and the heating temperature control accuracy is ± 1 ℃ .

10, In order to keep the sample pure, the air inlet filter is equipped.

11,Feed quantity can be adjusted by feed peristaltic pump, the minimum sample quantity can reach 50 ml.

12, After drying, the granularity of dry powder is more than 95% in the same granularity range.

13,For viscous materials, equipped with nozzle cleaner (through needle, when nozzle is blocked, will be automatically removed, needle frequency can be automatically adjusted.

   上海乔枫经过多年的发展，不断的引进日本和德国的技术，克服了国内很多物料很难喷雾干燥的难题，比如颗粒很难均匀的难题，平均颗粒15微米以下颗粒很难实现的难题，平均颗粒在100微米以上的难题，颗粒实心圆的难题等。