7280/7265/7225　数字锁相放大器-化工仪器网-手机站

北京燕京电子有限公司

免费会员

经销商

进入商铺全部产品

该企业相似产品

在线询价

在线询价

在线询价

在线询价

在线询价

在线询价

在线询价

在线询价

等离子，清洗机微小信号测量仪;频率特性分析仪;信号发生器;高速双极型放大器;生体计测系统;滤波器;计测系统;LCR仪表;AE计测装置;微小信号测量仪;锁相放大器;锁相电压表;超低噪声放大器;前置放大器;隔离放大器;交流电源;变频电源;仿真电源;功率放大器;可编程滤波器;低噪声放大器

北京燕京电子有限公司成立于1988年，是北京电子控股有限责任公司直属企业，是一家集成供应商和专业设备及仪器的服务商。公司目前经营规模超亿元，主营业务为向国内外科研院所、大型设备制造业和金融业提供成套集成供应及专业设备仪器的维护、运行等专业化的系统解决方案和服务。

在制造行业，燕京公司在世界各地拥有众多的*代理商和合作伙伴，经过*合作交流的实践建立了广泛的市场营销网络。同时与国内各相关领域的重要厂商也建立有良好的合作关系，为大型设备制造业的客户提供成套原材料、零部件及电子元器件。

在仪器服务方面，燕京公司是众多仪器设备厂商在中国的重要合作伙伴。公司致力于从事工业电子、教学科研、通信技术以及电力石化等领域的产品销售和系统集成，能够为用户提供各种良好的针对行业的、完整的测试应用解决方案。

详细信息

Voltage Input
Modes A only, -B only or Differential (A-B)
Full-scale Sensitivity
0.5 Hz ?/font> F ?/font> 250 kHz 10 nV to 1 V in a 1-2-5 sequence
250 kHz < F ?/font> 2.0 MHz 100 nV to 1 V in a 1-2-5 sequence
Max. Dynamic Reserve > 100 dB
Impedance 100 MW // 25 pF
Maximum Safe Input 20 V pk-pk
Voltage Noise 5 nV/?/font>Hz @ 1 kHz
C.M.R.R. > 100 dB @ 1 kHz
Frequency Response 0.5 Hz to 2.0 MHz
Gain Accuracy ?.3% typ, ?.6% max. (full bandwidth)
Distortion -90 dB THD (60 dB AC gain, 1 kHz)
Line Filter attenuates 50, 60, 100, 120 Hz
Grounding BNC shields can be grounded or floated via 1 kW to ground
Current Input
Mode Low Noise, Normal or Wide Bandwidth
Full-scale Sensitivity
Low Noise 10 fA to 10 nA in a 1-2-5 sequence
Normal 10 fA to 1 礎 in a 1-2-5 sequence
Wide Bandwidth
F ?/font> 250 kHz 1 pA to 100 礎 in a 1-2-5 sequence
F > 250 kHz 10 pA to 100 礎 in a 1-2-5 sequence
Max. Dynamic Reserve > 100 dB
Frequency Response (-3 dB):
Low Noise ?/font> 500 Hz
Normal ?/font> 50 kHz
Wide Bandwidth ?/font> 1 MHz
Impedance
Low Noise < 2.5 kW @ 100 Hz
Normal < 250 W @ 1 kHz
Wide Bandwidth < 25 W @ 10 kHz
Noise
Low Noise 13 fA/?/font>Hz @ 500 Hz
Normal 130 fA/?/font>Hz @ 1 kHz
Wide Bandwidth 1.3 pA/?/font>Hz @ 1 kHz
Gain Accuracy ? 0.6% typ, midband
Line Filter attenuates 50, 60, 100, 120 Hz
Grounding BNC shield can be grounded or floated via 1 kW to ground
Reference Channel
TTL Input
Frequency Range 0.5 Hz to 2.0 MHz
Analog Input
Impedance 1 MW // 30 pF
Sinusoidal Input
Level 1.0 V rms＊
Frequency Range 0.5 Hz to 2.0 MHz
Squarewave Input
Level 250 mV rms
Frequency Range 2 Hz to 2 MHz
＊Note: Lower levels can be used with the analog input at the expense of increased phase errors
Phase Set Resolution 0.001?/font> increments
Phase Noise at 100 ms TC, 12 dB/octave slope:
Internal Reference < 0.0001?/font> rms
External Reference < 0.01?/font> rms @ 1 kHz
Orthogonality 90?/font> ?.0001?/font>
Acquisition Time
Internal Reference instantaneous acquisition
External Reference 2 cycles + 50 ms
Reference Frequency Meter Resolution 1 ppm or 1 mHz, whichever is the greater
DemodulatorOutput Processing
Output Zero Stability
Digital Outputs No zero drift on all settings
Displays No zero drift on all settings Not Available
Analog Outputs < 5 ppm/?/font>C
Harmonic Rejection -90 dB
Output Filters
X, YR outputs only
Time Constant 1 祍 to 1 ms in a 1-2-5 sequence,4 ms
Slope (roll-off) 612 dB/octave
All outputs
Time Constant 5 ms to 100 ks in a 1-2-5 sequence
Slope 6, 12, 1824 dB/octave
Synchronous Filter Available for F < 20 Hz
Offset AutoManual on X and/or Y: ?00% full-scale
Absolute Phase Measurement Accuracy ?/font> 0.01?/font>
Oscillator
Frequency
Range 0.5 Hz to 2.0 MHz
Setting Resolution 1 mHz
Absolute Accuracy ? 50 ppm
Distortion (THD) -80 dB @ 1 kHz100 mV rms
Amplitude (rms)
Range 1 mV to 1 V
Setting Resolution 1 mV
Accuracy ?.2%
Stability 50 ppm/?/font>C
Output Impedance 50 W
Sweep
Amplitude Sweep
Output Range 0.000 to 1.000 V rms
Law Linear
Step Rate 20 Hz maximum (50 ms/step)
Frequency Sweep
Output Range 0.5 Hz to 2.0 MHz
Law Linear or Logarithmic
Step Rate 20 Hz maximum (50 ms/step)
Auxiliary Inputs
ADC 1, 2, 34
Maximum Input ?0 V
Resolution 1 mV
Accuracy ?0 mV
Input Impedance 1 MW // 30 pF
Sample Rate
ADC 1 only 40 kHz max.
ADC 12 17.8 kHz max.
Trigger Mode Internal, External or burst
Trigger Input TTL compatible
Outputs
Main Analog (CH1CH2) Outputs:
Function X, Y, R, q, Noise, Ratio, Log RatioUser Equations 1 & 2.
Amplitude ?.5 V full-scale; linear to ?00% full-scale
Impedance 1 kW
Update Rate
X, Y or R @ TC ?/font>4 ms 7.5 MHz
All outputs @ TC ?/font>5 ms 1 kHz
Signal Monitor
Amplitude ? V FS
Impedance 1 kW
Auxiliary D/A Output 12:
Maximum Output ?0 V
Resolution 1 mV
Accuracy ?0 mV
Output Impedance 1 kW
8-bit Digital Port 0 to 8 lines can be configured as inputs, with the remainder being outputs. Each output line can be set high or loweach input line read to allow interaction with external equipment. Extra line acts as trigger input
Reference Output
Waveform 0 to 3 V rectangular wave, active in External Reference Mode only
Impedance TTL-compatible
Power - Low Voltage ?5 V at 100 mA rear panel 5-pin 180?DIN connector for powering SIGNAL RECOVERY preamplifiers
Data Storage Buffer
Size 32k ?16-bit data points, may be organized as 1?2k, 2?6k, 3?0.6k, 4?k, etc.
Max Storage Rate
From LIA up to 1000 16-bit values per second
From ADC1 up to 40,000 16-bit values per second
User Settings
Up to 8 complete instrument settings can be saved or recalled at will from non-volatile memory Not available
Interfaces
RS232GPIB (IEEE-488). A second RS232 port is provided to allow "daisy-chain" connectioncontrol of up to 16 units from a single RS232 computer port
General
Power Requirements
Voltage 110/120/220/240 VAC
Frequency 50/60 Hz
Power 200 VA max
Dimensions
Width 17?quot; (435 mm)
Depth 19" (485 mm)
Height
With feet 6" (150 mm)
Without feet 5?quot; (130mm)
Weight 25.4 lb (11.5 kg)

主要特点
The model 7280 DSP Lock-in Amplifier is an exceptionally versatile instrument with outstanding performance. With direct digital demodulation over an operating frequency extending up to 2.0 MHz, output filter time constants down to 1 祍a main ADC sampling rate of 7.5 MHz it is ideal for recovering fast changing signals. But unlike some other high frequency lock-ins, it also works in the traditional audio frequency band.

In addition to its excellent technical specifications, it is also very easy to use. The front panel is dominated by a large electroluminescent display panel, used both to show the instrument''s outputsfor adjusting its controls via a series of menus. Controls are set by a combination of the use of the keys surrounding the displaythe keypad, while four cursor-movement keys simplify use of the graphic display menus.

Users of the SIGNAL RECOVERY (formerly PerkinElmer/EG&G) 72607265 will find switching to the 7280 very easy, since we''ve designed it with a similar menu structure. The only significant changes are in some of the control menus, where the better resolution of the display allows both the controlsthe instrument outputs to be shown simultaneously, for even faster feedback on the effects of control adjustments.

Naturally, the instrument includes the extended operating modes like dual reference, dual harmonicvirtual reference made popular by the 72607265, as well as the spectral display mode used to aid reference frequency selection. It also includes GPIBRS232 interfaces for remote computer controla range of auxiliary analogdigital inputsoutputs. Software support is available in the form of a LabVIEW driver supporting all instrument functions,the Acquire™ data acquisition software. The drivera demonstration version of the software, DemoAcquire, are available for download from this site.

In summary, if you need a lock-in capable of working beyond the traditional audio frequency band but still want the drift-free performance that only digital demodulation brings, then look no further - you have found it in the SIGNAL RECOVERY Model 7280.

该企业相似产品

详细信息

相关技术文章

同类产品推荐

相关分类导航

产品参数

常用功能直达