Besi Fico AMS-LM 芯片焊接机
时间：2017-08-12 阅读：1396
Besi Fico AMS-LM 芯片焊接机
In line with the market trend of larger substrates, Fico has introduced a new large substrate molding machine. The Fico AMS-LM can handle substrates of up to 102 x 280 mm and can handle all current single sided packages.
Large substrates allow a high board utilisation and in combination with the high output of the Fico AMS-LM, performance and yield increase significantly.
| Conventional | Fico AMS-LM |
|---|---|
| Standard substrates | 102 x 280 mm substrates |
| Moving blocks | Individual moving blocks |
| Complex handling | 35% less moving parts |
| Large and heavy mold | Modular mold design |
| Expensive PR-set | Low cost PR-set |
Cassette Handler
- High capacity
- Freely accessible
- Slot to slot copy
- Two or four deck version
- Bar code and RFID reader (optional)
Vision
- Leadframe orientation check
- Mark inspection
- Optical Character Verification (OCV)
Leadframe Handler
- Automatic orientation correction
- Leadframe pre-heating
- Anti warpage leadframe cooling
- Air cushion transport
Molding Press
- Large substrate molding
- Topedge molding (low viscosity compounds)
- Adjustable high clamping force
- Dynamic Clamping Control (Flip Chip Bare Die)
- 17 process patents
- Board and cavity vacuum
- Individual, equal board clamping
Pellet Supply
- Remote pellet feed (up to 40m)
- Pellet length check
- Pellet cooling
- Pellet age control
Width 3,145 mm Depth 1,652 mm Height 1,976 mm Weight Approx. 3,450 kg Leadframe Dimensions
Width 72 -102 mm Length 100 - 280 mm Thickness 0.1 - 1.5 mm Height Max. 2 mm Cassette Dimensions
Width 80 - 120 mm Length 180 - 300 mm Height 100 - 165 mm Storage capacity 800 mm Supply Requirements
Voltage 208-230-380-400-440-460-480VAC - 3~ Frequency 50 / 60 Hz Power rating 9 kVA Compressed air 5 - 10 bar Average air consumption 6 m3/h at 6 bar Factory exhaust 300 m3/h at 50 Hz Equipment Performance
Uptime ≥ 98% Max. throughput ca. 250 Lf/h MTBF ≥ 200 h for every MTTR of 1 h MTBA ≥ 3 h MTTR ≤ 1 h MTTA ≤ 3 min Press and Mold Properties
Max. clamp force 600 kN Max. mold opening 90 mm Max. transfer pressure 180 bar Pellet diameter 11, 14 or 14.3 mm Max. number of plungers 10 Max. cavity temperature difference ± 2 ºC