冷却液氯离子自动检测仪紫外可见分光光度计介绍：

所输入的因子个数与所选择的曲线拟合方法有关，下表是其对应关系：

试验前的准备  

Ÿ 将试验用比色皿或试管用蒸馏水或其他专门的清洗剂清洗干净，并用柔软的棉布或纸巾将其表面的手指印或滴液擦试干净；

Ÿ 将盛参比液的比色皿放入4联手动样品架（紫外可见分光光度计系列）或固定单个样品架（对于双光束紫外可见分光光度计）最靠近你的槽位中，再将推杆向前推到头使比色皿正对光路，关上样品室盖；

Appendix  B

Correction Methods

A number of correction techniques can be used to eliminate or reduce interference errors.In general,if the source of the error is known and is consistent from sample to sample.the error can be eliminated.On the other hand,if the source is unkown and varies from sample to sample,the error can be reduced but not eliminated.Correction techniques can always require data from at least two wavelengths. The more sophisticated correction techniques require multiwavelenghth or spectral data.

A.1  Isoabsorbance

When a known interfering component with a known spectrum is present,the error introduced by this component at the analytical wavelength for the target analyte can be eliminated by selecting a reference wavelength at which the interfering compound exhibits the same absorbance as it does at the analytical wavelength.The absorbance at this reference wavelength is subtracted from the absorbance at the analytical wavelength,as shown in Figure A1.The residual absorbance is the ture absorbance of the analyte.

This technique is less reliable when the spectra of the analyte and of the interferent are highly similar.Moreover,it can correct for only one interference

如需了解冷却液氯离子自动检测仪紫外可见分光光度计更多信息，欢迎来咨询！

上海析谱仪器有限公司是专业从事实验室科学仪器自主研发、生产、销售和服务一体的技术企业。公司坐落于上海市松江区久富经济开发区。公司成立于2012年，公司主营实验室常用仪器，光谱分析仪器-紫外可见分光光度计、可见分光光度计、双光束紫外可见分光光度计、火焰光度计、薄膜固体测试仪、氮吹仪、固相萃取、索氏提取器，酸度计、天平、实验室耗材、配件、配套标准试剂盒等。