奥林巴斯HST-X04扫查器
奥林巴斯HST-X04飞行时间衍射(TOFD)手动扫描仪提供了一个高效,低成本,多功能的焊缝检测解决方案。
应用程序
•手动部署单轴扫描仪,用于板材、管道和曲面
•适用于管道、压力容器、储罐和结构件
•可在任何方向操作,无论是在平面上还是在51毫米(2英寸)以下的管道上。OD。
数据采集
•记录的结果与OmniScan®
•理想的位置相关的a扫描,b扫描,和回声动态扫描数据收集
•适用于任何有两个UT通道的系统
扫描工具组件
•扫描仪与150毫米帧
•两个10mhz(3毫米元件直径)CentraScan™复合TOFD探头,比传统UT探头的信噪比有所提高
•三套相约楔形与硬质合金穿针和灌溉洞45º,60º,70º操作
•两个LEMO®-Microdot®传感器电缆2.5米长
•两个罗曼兰®成了bnc适配器
•弹簧加载、摩擦驱动和防水的微型轮式编码器,用于x轴或y轴数据编码
•灵活的编码器定位支架
•额外的250毫米框架更广泛的探针中心分离
•有小泡沫垫的手提箱
该HST-X04扫描仪套件可以进一步配置,以适应广泛的奥林巴斯TOFD和脉冲回波探头和楔形,包括复合产品线。
可选的前置放大器工具包
奥林巴斯HST-X04扫查器
零件号:5682 - kit01
Panametrics 5682前置放大器套件包括:
•5682年前置放大器
•2.5 - m LEMO-LEMO电缆
•电力电缆
•9 V电池
•带情况
前置放大器操作与标准 9 V电池或插入OmniScan®提供电力电缆。
The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.
Applications
- Manually deployed single-axis scanner for use on plate, pipe, and curved surfaces
- Applicable to pipes, pressure vessels, storage tanks, and structural components
- Operates in any orientation, either on flat surfaces or on pipes up to 51-mm (2 in.) OD.
Data acquisition
- Permanent record of the results with the OmniScan®
- Ideal for position-related A-scan, B-scan, and echo-dynamic scan data collection
- Suitable for any system with 2 UT channels
Scanner Kit Components
- Scanner with 150-mm frame
- Two 10-MHz (3-mm element diameter) CentraScan™ composite TOFD probes offering signal-to-noise ratio improvement over conventional UT probes
- Three sets of ST1 wedges with carbide wear pins and irrigation holes for 45º, 60º, and 70º operation
- Two LEMO®-Microdot® transducer cables 2.5m long
- Two LEMO®-to-BNC adapters
- Spring-loaded, friction-driven, and water proof Mini-Wheel encoder for X-axis or Y-axis data encoding
- Brackets for flexible encoder positioning
- Additional 250-mm frame for wider probe center separation
- Foam-padded carrying case
This HST-X04 Scanner kit can be further configured to fit the broad range of Olympus TOFD and pulse-echo probes and wedges, including the composite product line.
Optional Preamplifier Kit
Part number: 5682-KIT01
The Panametrics 5682 preamplifier kit includes:
- 5682 preamplifier
- 2.5-m LEMO-LEMO cable
- Power cable
- 9 V battery
- Belt case
Preamplifier operates with standard 9 V battery or plugged to OmniScan® with supplied power cable.
Preamplifier specifications
- 30 dB gain
- 50 hours of battery life (continuous discharge)
- Continuous power-level indicator
- 67 dB signal-to-noise ratio
- Weight: 180 g (6.4 oz) with battery
- CE-certified