适用范围 Application

LANKAI 高精度FOC直流无刷电机控制器广泛适用于各式振荡器，摇床，电动搅拌器，反应釜等高精度恒速设备。

DC motor constant speed controller application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.

产品特点 Features

LANKAI 高精度FOC直流无刷电机控制器LKSC-C系列是高性能、高精度的智能速度控制模块，其特点如下：

①采用最新FOC 正弦波矢量控制技术和模糊PI控制技术，运行平稳，缓启缓停，大力矩，轻噪音，发热低，可长时间稳定运行，带过流过速堵转保护电机等功能。

②恒速， 恒扭矩模式可一键切换。

③可集成恒温功能， 可组合加热、制冷、恒湿、风机、门锁等功能。

④可设置99段程序，多种液晶显示规格可选。

⑤标配1500RPM，扭矩0.2-1.2NM的57&86直流无刷电机，也可适配其他支持FOC的无刷电机或伺服电机

⑥ 扩展： 支持 232接口和标准485ModBus-RTU协议，可接电脑上位机软件控制，PLC等，支持MODBUS协议标准外设。

①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions  of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.

②Can set to operate by constant speed or constant torque mode.

③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.

④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.

⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.

技术参数 Technical Parameter