其他品牌 品牌
生产厂家厂商性质
常州市所在地
适用范围 Application
LANKAI 高精度恒温直流电机驱动板适用于工业实验仪器如水浴气浴振荡器、恒温摇床摇瓶，搅拌器, 离心机等需要高精度恒速恒速设备。
Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
产品特点 Feature
LANKAI 高精度恒温直流电机驱动板LKSC-BNHL-T是智能PID恒温恒速控制仪表，是高性能集成度的控制模块：
①采用自研模糊PID控温，控温准，稳定快， 漂浮小。自适应PID，一键自整定。
②模糊PI速度控制，PWM驱动控制，寿命长，精度高。
③可选配99段程序，横向竖向，多尺寸液晶显示可选。
④ 扩展： 支持标准RS485等通用接口，可配置MODBUS RTU 通讯协议，一台主机控制多套设备，EEPROM存储下载，数据自采集。可接上位机软件，查看历史实时数据或者曲线。
① Intelligent PID fuzzy temp.control with adaptive PID self-tuning, high temp. efficiency , accurate and smaller temp. drift.
②Fuzzy PI speed control, PWM drive control , long lifespan, high accuracy.
③ Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect
④ Optional for 99 program segments , adopt multiple size of LCD display.
⑤ Expansion: support 232 interface and standard 485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits. Can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技术参数 Technical Parameter
温度范围 Temprature range | 0-100°C，-90~400°C | ||||||
速度范围 Measurement range | 0-9999RPM | ||||||
输入方式 Input mode | 霍尔探头, 热敏电阻/PT100 Hall probe， thermistor/PT100 | ||||||
测量误差 Inaccuracy of measurement | ±1%FS/0.1°C ±1% Revolution/minute， 0.1°C | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
负载功率 Load power | 制冷（风机）0-2000W，加热0-2000W，25A继电器保护 0-2000W ，heat with 25A electric relay protection | ||||||
输出方式 Output mode | AC220V/24A可控硅 AC220V, 24A SCR | ||||||
电机功率 Moter Power | 直流有刷电机，驱动电流10A (可升级FOC矢量控制直流无刷电机或矢量控制伺服电机） DC moter 10A（or FOC Vector Brushless Motor，FOC servo Motor） | ||||||
电压范围 Supply voltage | 直流24V DC 24V | ||||||
程序段 Program segment | 99段可编程 99 program segments | ||||||
定时范围 Timer range | 0-99H59Min | ||||||
工作环境 Working condition | -5℃—50℃，相对湿度35%—85% Environment temperature:-5℃—50℃, Relative humidity：35%—85% | ||||||
外观尺寸 Exterior size | 92mm*150mm | ||||||
开孔尺寸 Hole size | 86mm*144mm | ||||||
电源板尺寸 Power panel size | 100mm*140mm | ||||||
