适用范围 Application

LANKAI 恒温矢量FOC直流无刷电机摇床控制器广泛适用于各式振荡器，摇床摇瓶，电动搅拌器，磁力搅拌器，反应釜等高精度恒温恒速设备。

Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.

产品特点 Features

LANKAI 恒温矢量FOC直流无刷电机摇床控制器LKSC-C-T系列智能恒温恒速控制仪表是高性能、高精度的温速一体控制模块，其性能如下：

①电机系统： 采用最新FOC正弦波矢量控制技术和模糊PI控制技术，运行平稳，缓启缓停，大力矩，轻噪音，发热低，可长时间稳定运行，带过流过速堵转保护电机等功能。也可适配其他直流无刷电机或者伺服电机。

②恒速，恒扭矩模式可一键切换。可组合恒湿、风机、门锁等功能。

③温控系统： 采用多年自研模糊PID控温，超调小,稳定快，过冲低。自适应PID， 一键自整定，超温（范围可设置）、传感器脱落报警。

④ 可设置99段程序，多种液晶显示、触摸屏尺寸规格可选。

⑤扩展：支持 232接口和标准485ModBus-RTU协议，可接电脑上位机软件控制，PLC等，支持MODBUS协议标准外设。

①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions  of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.

②Can set to operate by constant speed or constant torque mode. 

③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.

④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.

⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.

技术参数 Technical Parameter