Newport/美国 品牌
经销商厂商性质
上海市所在地
| 型号 |  | ||
| MTN100BLHS | MTN200BLHS | MTN300BLHS | |
| 行程范围 | 100 mm | 200 mm | 300 mm |
| 最大速度 | 250 mm/s | 250 mm/s | 250 mm/s |
| 最小位移增量 | 300 nm | 300 nm | 300 nm |
| 中心负载能力 | 1000 N | 1000 N | 1000 N |
| 轴向负载 (+Cx) | 200 N | 200 N | 200 N |
| 逆轴向负载能力 (-Cx) | 200 N | 200 N | 200 N |
| 断电时夹持力 | 100 N | 100 N | 100 N |
| 精度，典型值 | ±2.0 µm | ±2.0 µm | ±2.0 µm |
| 精度，保证值 | ±4.0 µm | ±4.0 µm | ±4.0 µm |
| 单向重复精度，典型值 | ±0.2 µm | ±0.2 µm | ±0.2 µm |
| 单向重复精度，保证值 | ±0.3 µm | ±0.3 µm | ±0.3 µm |
| 双向重复精度，典型值 | ±0.3 µm | ±0.3 µm | ±0.3 µm |
| 双向重复精度，保证值 | ±0.5 µm | ±0.5 µm | ±0.5 µm |
| 俯仰，典型值 | ±10 µrad | ±20 µrad | ±30 µrad |
| 俯仰，保证值 | ±20 µrad | ±40 µrad | ±60 µrad |
| 偏摆，典型值 | ±10 µrad | ±17 µrad | ±30 µrad |
| 偏摆，保证值 | ±17 µrad | ±35 µrad | ±53 µrad |
| 俯仰顺应性 | 6 µrad/Nm | 6 µrad/Nm | 6 µrad/Nm |
| 偏摆顺应性 | 5 µrad/Nm | 5 µrad/Nm | 5 µrad/Nm |
| 滚转顺应性 | 4 µrad/Nm | 4 µrad/Nm | 4 µrad/Nm |
| 电缆长度 | 3 m | 3 m | 3 m |
| 重量 | 10.5 kg | 12.9 kg | 15.4 kg |
| MTBF | 20,000 h (25% load, 30% duty cycle) | 20,000 h (25% load, 30% duty cycle) | 20,000 h (25% load, 30% duty cycle) |
为了获得更快的速度和更好的重复性，Newport提供了MTN的无刷直流电机版本。 它的中心负载能力为1000 N，与其他类型的MTN级相同。 为了提供驱动无刷直流电动机所需的高功率，请使用 XPS控制器 必须使用带有 XPS-EDBL 放大器的放大器来控制位移台。 （注意：无刷直流电机不兼容ESP。）
MTN Series stages are available with Stepper, DC, or Brushless DC motors.
●Stepper Motor (MTN-PP): Stepper Motors are a lower cost alternative to DC motor systems for less demanding applications. Micro-stepping is used to improve resolution and smoothness of motion.
●DC Motor (MTN-CC): DC Motors are best characterized by their high speeds, smooth motion, good efficiency and a high power/weight ratio. They are preferable to stepper motor stages for applications requiring high dynamic speed and tight repeatability.
●Brushless DC Motor (MTN-BLHS): Brushless DC Motors offer faster speed and finer repeatability than standard DC motors. They are designed for applications that require moving heavy loads with high speed and repeatability
| MTN-PP (Stepper Motor) | MTN-CC (DC Motor) | MTN-BLHS (Brushless DC Motor) | |
| Travel Range (mm) | 100 / 200 / 300 | 100 / 200 / 300 | 100 / 200 / 300 |
| Maximum Speed (mm/s) | 40 | 100 | 250 |
| Minimum Incremental Motion (nm) | 100 | 600 | 300 |
| Uni-directional Repeatability, Guaranteed (µm) | ±0.75 | ±0.75 | ±0.3 |
| Bi-directional Repeatability, Typical (Guaranteed) (µm) | ±1.75 (±2.75) | ±0.75 (±1.5) | ±0.3 (±0.5) |
| Accuracy, Typical (Guaranteed) (µm) | ±1.5 (±2.5) / ±2.0 (±2.5) / ±2.5 (±3.0) | ±1.5 (±2.5) / ±2.0 (±2.5) / ±2.5 (±3.0) | ±2.0 (±4.0) |
全钢结构具有很高的刚度和热稳定性。由于整体由钢制成，因此消除了双金属弯曲效应和误差。在全钢线性平移台中，MTN 具有 100 kg 的最高载重能力。
滚珠丝杠确保更好的动态性和寿命，以及在两个方向上的轴向负载能力相等。
非移动滚珠轴承罩设计消除了轴承罩漂移，增强了可靠性。
对于MTN平台的XY配置，请使用 M-CAP-M61 从动螺钉。 同样的螺钉也可以用于通过滑架上的通孔将MTN平台直接螺栓连接到定制安装表面。 要将MTN平台安装到光学平台上，请使用 MTN-BP 底板。
Newport 保证根据 ASME B5.57 和 ISO 230-2 标准测量和记录的规格值。典型性能值比可保证值高出两倍。
Compatible motion controllers for the MTN-BLHS brushless DC motor-driven stages are:
●XPS-RLD Motion Controller (2 or 4 Axis): Requires an XPS-DRV11BL High-Power Amplifier.
●XPS-D Motion Controller (2 , 4 , 6 or 8 Axis): Requires an XPS-DRV11BL High-Power Amplifier.
